• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.72-75
• /
• 2010

본 논문에서는 열탄점소성 손상과 접촉 문제의 효율적인 해석을 위하여 적응성 영역/경계 분할법을 제안하였다. 적응성 영역/경계 분할법은 시간 증분 또는 반복 기법 단계에서 열탄점소성 손상과 같은 재료 비선형성을 감안하여 부영역을 재설정하며, 접촉에 따른 경계 비선형성은 경계면을 통하여 부영역으로부터 독립적으로 분할한다. 분할된 각각의 부영역과 경계면을 기준으로 유한요소 정식화를 수행하며, 공유면 및 접촉 공유면의 연속 구속 조건을 처리하기 위하여 벌칙 함수 기법을 적용하였다. 결과적으로 재료 및 경계 비선형성은 일부 부영역과 접촉 경계면에서 계산되는 유한요소 행렬에 국한된다. 수치 실험을 통하여 적응성 해석 알고리듬의 기본적인 특성과 효율성 향상에 대하여 분석하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.68-71
• /
• 2010

극심한 고온 및 고압 환경에 노출되기 쉬운 항공우주 구조물에서 발생하는 기계적 삭마 현상을 해석하기 위하여 영역/경계 분할법을 적용한 삭마 해석 모델을 제안하였다. 영역 및 경계는 상변화 현상에 의한 비선형 거동을 하는 삭마 부영역과 선형 거동을 하는 선형 열탄성 부영역, 공유면, 경계 공유면으로 분할하였다. 삭마 재료 내부의 열분해 반응은 엔탈피 방법을 이용하였으며, 표면 침식 반응은 공기역학적 전단 응력과 삭마 재료의 전단 강도를 기반으로 매칭 기법을 이용하였다. 화학적 및 열적 삭마는 고려하지 않았으며, 간단한 수치 해석을 통해서 기본적인 기계적 삭마 특성을 분석하였다.

• Coupled systems mechanics
• /
• 제8권2호
• /
• pp.99-109
• /
• 2019

This work investigates the accuracy and performance of a $FE^2$ multi-scale implementation used to predict the behavior of composite materials. The equations are formulated assuming the small deformations solid mechanics approach in non-linear material models with hardening plasticity. The uniform strain boundary conditions are applied for the macro-to-micro transitions. A parallel algorithm was implemented in order to solve large engineering problems. The scheme proposed takes advantage of the domain decomposition method at the macro-scale and the coupling between each subdomain with a micro-scale model. The precision of the method is validated with a composite material problem and scalability tests are performed for showing the efficiency.

• Smart Structures and Systems
• /
• 제10권2호
• /
• pp.131-154
• /
• 2012

In this paper, it is aimed to determine the seismic behaviour of highway bridges by nondestructive testing using ambient vibration measurements. Eynel Highway Bridge which has arch type structural system with a total length of 216 m and located in the Ayvaclk county of Samsun, Turkey is selected as an application. The bridge connects the villages which are separated with Suat U$\breve{g}$urlu Dam Lake. A three dimensional finite element model is first established for a highway bridge using project drawings and an analytical modal analysis is then performed to generate natural frequencies and mode shapes in the three orthogonal directions. The ambient vibration measurements are carried out on the bridge deck under natural excitation such as traffic, human walking and wind loads using Operational Modal Analysis. Sensitive seismic accelerometers are used to collect signals obtained from the experimental tests. To obtain experimental dynamic characteristics, two output-only system identification techniques are employed namely, Enhanced Frequency Domain Decomposition technique in the frequency domain and Stochastic Subspace Identification technique in time domain. Analytical and experimental dynamic characteristic are compared with each other and finite element model of the bridge is updated by changing of boundary conditions to reduce the differences between the results. It is demonstrated that the ambient vibration measurements are enough to identify the most significant modes of highway bridges. After finite element model updating, maximum differences between the natural frequencies are reduced averagely from 23% to 3%. The updated finite element model reflects the dynamic characteristics of the bridge better, and it can be used to predict the dynamic response under complex external forces. It is also helpful for further damage identification and health condition monitoring. Analytical model of the bridge before and after model updating is analyzed using 1992 Erzincan earthquake record to determine the seismic behaviour. It can be seen from the analysis results that displacements increase by the height of bridge columns and along to middle point of the deck and main arches. Bending moments have an increasing trend along to first and last 50 m and have a decreasing trend long to the middle of the main arches.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.569-577
• /
• 2010

다상 유체 시스템에 적용할 수 있는 다중스케일 입자 시뮬레이션 기법을 개발하였다. 거시 모델과 미시모델이 만나는 경계영역에서 세가지로 구별되는 기능을 수행하도록 하였다. 먼저, 기상과 액상을 분리하여 연결하기 위해 벽을 설정하였다. 또 경계영역을 근처에서 경계의 위치를 측정하고 이것에 벽의 각도와 위치가 연동하여 접촉각 값을 미시모델에서 거시모델로 전달하게 하였다. 마지막으로, 입자의 삽입과 제거를 통해 경계영역의 질량과 온도를 거시적 조건에 맞추도록 하였다. 이 알고리즘들을 적용한 완전습윤과 부분습윤시스템들은 좋은 결합 결과를 보였다.

• Structural Engineering and Mechanics
• /
• 제50권2호
• /
• pp.137-149
• /
• 2014

In this study, modal parameters such as natural frequencies, mode shapes and damping ratios of RC frames with low strength are determined for different construction stages using ambient vibration test. For this purpose full scaled, one bay and one story RC frames are produced and tested for plane, brick in-filled and brick in-filled with plaster conditions. Measurement time, frequency span and effective mode number are determined by considering similar studies and literature. To obtain experimental dynamic characteristics, Enhanced Frequency Domain Decomposition and Stochastic Subspace Identification techniques are used together. It is shown that the ambient vibration measurements are enough to identify the most significant modes of RC frames. The results indicate that modal parameters change significantly depending on the construction stages. In addition, Infill walls increase stiffness and change the mode shapes of the RC frame. There is a good agreement between mode shapes obtained from brick in-filled and in-filled with plaster conditions. However, some differences are seen in plane frame, like expected. Dynamic characteristics should be verified using finite element analysis. Finally, inconsistency between experimental and analytical dynamic characteristics should be minimize by finite element model updating using some uncertain parameters such as material properties, boundary condition and section properties to reflect the current behavior of the RC frames.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.58-66
• /
• 2010

Topology design optimization is a method to determine the optimal distribution of material that yields the minimal compliance of structures, satisfying the constraint of allowable material volume. The method is easy to implement and widely used so that it becomes a powerful design tool in various disciplines. In this paper, a large-scale topology design optimization method is developed using the efficient adjoint sensitivity and optimality criteria methods. Parallel computing technique is required for the efficient topology optimization as well as the precise analysis of large-scale problems. Parallelized finite element analysis consists of the domain decomposition and the boundary communication. The preconditioned conjugate gradient method is employed for the analysis of decomposed sub-domains. The developed parallel computing method in topology optimization is utilized to determine the optimal structural layout of human powered vessel.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.200-207
• /
• 2006

In this paper a new approach which combines implicit surface scheme and NURBS surface interpolation method is proposed in order to generate a complete surface model from unorganized point cloud data. In the method a base surface was generated by creating smooth implicit surface from the input point cloud data through which the actual surface would pass. The implicit surface was defined by a combination of shape functions including quadratic polynomial function, cubic polynomial functions and radial basis function using adaptive domain decomposition method. In this paper voxel data which can be extracted easily from the base implicit surface were used in order to generate rectangular net with good quality using the normal projection and smoothing scheme. After generating the interior points and tangential vectors in each rectangular region considering the required accuracy, the NURBS surface were constructed by interpolating the rectangular array of points using boundary tangential vectors which assure C$^1$ continuity between rectangular patches. The validity and effectiveness of this new approach was demonstrated by performing numerical experiments for the various types of point cloud data.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.60-68
• /
• 1991

비압축성 유체유동에 대한 Navier-Stokes 방정식과 충돌 접촉면 조건으로 특징지어지는 강체-유체 충돌문제를 Lagrangian 유한요소법에 의해 해석하였으며, 계산의 편의상, 속도장을 점성및 중력항과 압력항으로 나누어 수행하는 소위 fractional step method를 도입하였다. 유체영역은 4절점의 4각형 요소로 분할하였으며, 충분히 작은 시간간격의 도입을 전제로 하여 explicit time marching법으로 수치해석하였다. 매 시간 step의 초기에 우선 운동량-충격량 법칙으로 강체의 수면충돌후 속도를 구했으며, 그 속도로 표현되는 충돌 접촉면의 경계조건과 완전한 형태의 자유표면조건 그리고 운동방정식 및 연속 방정식을 모두 만족하는 속도장을 구하였다. 본 논문에서 제시하는 수치해석법에 의하면, 유체충격문제에 있어 매우 중요하다고 알려져 있는 tip splash를 포함하는 자유표면의 형상을 쉽게 추적해 갈 수 있다. Lagrangian 유한요소법의 적용의 타당성을 확인하기 위하여 대칭형 2차원 쐐기 모양의 강체가 수면충돌하는 경우를 예로하여 시간의 경과에 따른 충격수압의 분포 및 충격외력 등을 추정한 결과, 본 방법의 적용의 유효성과 아울러 몇가지 유용한 결론을 유도할 수 있었다.

• Steel and Composite Structures
• /
• 제16권1호
• /
• pp.21-44
• /
• 2014

The aim of this study is to determine the dynamic characteristics of long reinforced concrete highway bridges with post-tension tendons using analytical and experimental methods. It is known that the deck length and height of bridges are affected the dynamic characteristics considerably. For this purpose, Berta Bridge constructed in deep valley, in Artvin, Turkey, is selected as an application. The Bridge has two piers with height of 109.245 m and 85.193 m, and the total length of deck is 340.0 m. Analytical and experimental studies are carried out on Berta Bridge which was built in accordance with the balanced cantilever method. Finite Element Method (FEM) and Operational Modal Analysis (OMA) which considers ambient vibration data were used in analytical and experimental studies, respectively. Finite element model of the bridge is created by using SAP2000 program to obtain analytical dynamic characteristics such as the natural frequencies and mode shapes. The ambient vibration tests are performed using Operational Modal Analysis under wind and human loads. Enhanced Frequency Domain Decomposition (EFDD) and Stochastic Subspace Identification (SSI) methods are used to obtain experimental dynamic characteristics like natural frequencies, mode shapes and damping ratios. At the end of the study, analytical and experimental dynamic characteristic are compared with each other and the finite element model of the bridge was updated considering the material properties and boundary conditions. It is emphasized that Operational Modal Analysis method based on the ambient vibrations can be used safely to determine the dynamic characteristics, to update the finite element models, and to monitor the structural health of long reinforced concrete highway bridges constructed with the balanced cantilever method.