• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2319-2324
• /
• 2003

This paper addresses the optimal design of dividing wall distillation column which is rapidly applied in a variety of chemical processes over recent several years because of its high energy saving efficiency. A general dividing wall column model which can cope with the heat transfer through the dividing wall is developed using rigorous computer simulation. Based on the simulation model, the effects of the internal recycle flow distribution around the dividing wall and the heat transfer across the dividing wall on overall system performance are investigated. An improved method is suggested to utilize the heat transfer through the wall to optimal column design. The suggested method is compared with the existing method via. simulation study and shows more improved energy saving result. Several control strategies for the divided wall column are tested and the optimal control strategy is propose

• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.83-94
• /
• 2019

LPG is increasingly being used as a clean energy source due to the continuous strengthening of environmental regulations. In addition, the demand of propane which is the basic compound for petrochemicals is increasing for propylene production. In the study, a divided wall column was used as de-propanizer and de-butanizer, which is expected to save large amount of energy among the four conventional distillation columns used for processing LPG. The simulation results showed a decrease of energy duty with ESI by 30.30% using two divided wall columns. Furthermore, simulation case studies were carried out with respect to design and operation condition. The main column tray and withdrawal tray were determined from the design case studies while the internal liquid flow and vapor flow were decided from the operating case studies. Also, ESI of 1.06% could be achieved from the case studies. According to the results, the simulation method used showed that it is greatly helpful to the design and evaluate a highly efficient divided wall column.

• 청정기술
• /
• 제16권1호
• /
• pp.64-70
• /
• 2010

본 연구에서는 상용 폴리실리콘 제조공정 중 삼염화실란 정제공정에 사용되는 증류탑에 대해 분리벽형 증류탑을 적용하는 방안을 제안하였다. 상용 전산모사 프로그램(HYSYS)을 통해 기존의 단순 증류탑을 사용한 정제공정과 분리벽형 증류탑으로 대체한 공정을 각각 전산모사 하여 같은 순도와 수율로 삼염화실리콘을 정제할 때 증류탑에서 소모되는 에너지와 투자비용 효과를 비교 분석하였다. 그 결과, 분리벽형 증류탑을 적용한 정제공정이 기존 정제공정에 비해 약 61%의 에너지 절감 효과와 58%의 투자비용 절감효과를 가지는 것으로 확인되었다.

• 한국가시화정보학회지
• /
• 제9권4호
• /
• pp.74-79
• /
• 2011

In this study the change of free surface vortex is represented at different times according to height of water and with or without curtain wall installation. The air volume fraction is investigated at each condition of water level and the influence about creation of vortex is analyzed. The height of sump intake is taken as 100mm and the water level is divided into 5 steps. The sump model is the TSJ model and the curtain wall is applied by HI standard of America. The results shows that the free surface vortex can be identified on the isotropic surface at air volume fraction 1%~5% and the vortices make an air column from the free surface to the sump intake and are created and destroyed repeatedly. In the higher water level, less air is absorbed into the intake pipe. After curtain wall installation, the suction rate of the air volume fraction is decreased by 6.7%. The result of the vortex motion according to time, works on a cycle.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.1017-1022
• /
• 2008

분리벽형 열복합 증류탑이 현장에서 에너지 절감형 증류 시스템으로 많이 사용되고 있으나 증류탑을 새로 제작하여야 하는 어려움이 있어, 기존의 증류탑을 활용한 에너지 절감형 증류 시스템을 제안하였다. 제안된 증류탑은 BTX 공정에서 기존 시스템에 비해 약 39%의 에너지 절감효과가 있다. 또, 제안된 증류 시스템은 분리벽형 증류탑에 비해 운전성을 개선할 수 있음을 보였으며, 추가된 증류탑의 단수는 중간제품의 조성에 큰 영향을 미치지 않는다.

• 한국주거학회논문집
• /
• 제26권6호
• /
• pp.139-146
• /
• 2015

In this study, the plane type of main building relics of unified Silla period house site which excavated in Gyeongju city after 1990s was classified and the architectural characteristic of them was investigated. The chronology of building relics in Silla capital city site was mostly known as 8-9th century, and by standard of column arrangement, the plane types of them could be classified as grid type, front veranda-grid type, outer column type. The outstanding characteristic of plane is wide span and open front veranda. In most relics the span were over 4 meters, and inner foundations for small post and strip foundation were found between columns. The front veranda added type buildings were composited of enclosed main room and open front veranda, and column arrangement of them dose not fall into line in most case. Thus it thought that the structures of enclosed main room and open front veranda were independent. The interior space of enclosed main room were divided two rooms by partition wall in some case. In this case, one room is enclosed by wall, and the other room has open front side. This plane is considered for the pleasant life in cold winter and hot summer.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.443-450
• /
• 2001

The Mixed building structures can be divided into three partition, namely, upper wall, lower frame, and transfer system which link two partitions. The purpose of this study is to investigate the nonlinear response characteristics of structures, as the stories of lower frame of mixed building structures changes. The recorded earthquake ground motions of EI Centro 1940 NS is adopted, and the maximum ground accelerations are adjusted to 55ga1, 110ga1, 220ga1, 330ga1. The conclusions of this study are the following. 1) The responses of model that the story of lower frame is one were different from those of other models. 2) The process of ductility hinge occurrence of member was ends of coupling beam of upper wall and ends of beam of lower frame in 55ga1, bases of shear wall on pit floor in 110ga1, and bases of column of 1F in 220ga1.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.783-791
• /
• 2019

Prefabricated reinforced-concrete shear walls are used extensively in building structures because they are convenient to construct and environmentally sustainable. To make large walls easier to transport, they are divided into smaller segments and then assembled at the construction site using a variety of connection methods. The present paper proposes a precast shear wall assembled using steel shear keys, wherein the shear keys are fixed on the embedded steel plates of adjacent wall segments by combined plug and fillet welding. The anchoring strength of shear keys is known to affect the mechanical properties of the wall segments. Loading tests were therefore performed to observe the behavior of precast shear wall specimens with different anchoring components for shear keys. The specimen with insufficient strength of anchoring components was found to have reduced stiffness and lateral resistance. Conversely, an extremely high anchoring strength led to a short-column effect at the base of the wall segments and low deformation ability. Finally, for practical engineering purposes, a design approach involving the safety coefficient of anchoring components for steel shear keys is suggested.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.718-723
• /
• 2017

구조설계 실무 현장에서의 구조해석 모델링 방법을 조사해 보면, 대부분의 경우, 삼차원 구조해석을 위해 슬래브를 판요소를 이용한 메쉬의 형태로 모형화 하고, 전단벽을 쉘요소 또는 벽요소를 사용하여 모형화 하고 있다. 여기서 주목할 점은 해석모형 작성의 편의성을 위하여 전단벽을 층과 층 및 기둥선과 기둥선 사이에 존재하는 한 개의 요소로 모형화 한다는 것이다. 이와 같은 모형화 방법은 사용되는 컴퓨터 프로그램에 따라 해석 오류를 발생시킬 수 있으며, 이러한 오류는 해석 결과의 신뢰성을 저하시키게 된다. 따라서 구조해석의 신뢰성을 확보하기 위해서는 이러한 오류가 발생하는 원인을 조사하고 합리적인 모형화 방법을 찾기 위한 연구가 필요하다. 원인 분석을 위한 비교 대상 해석 프로그램은 MIDAS와 SAP2000 및 neoMAX등과 같은 상용프로그램과 요소의 강성을 추측하기 위해 연구용인 sNs를 사용하였다. 본 연구에서는, 구조해석 실무현장에서 사용하고 있는 전단벽 모형화 방법에 따른 해석오류의 원인들을 분석해 보고자 한다. 또한 이러한 분석 결과를 바탕으로 전단벽 모형화를 위한 몇 가지 고려사항들을 제시하고자 한다.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.55-60
• /
• 2012

분리벽형 증류탑으로 상용화된 열복합 증류 시스템의 에너지 절약효과와 엑서지 손실을 기존의 3성분 분리 시스템인 2 탑 증류탑의 에너지 사용량 및 엑서지 손실과 비교하였다. 비교에 사용한 예제공정으로 석유화학 공장에서 보편적으로 사용하는 벤젠-톨루엔-m-자일렌 분리 공정을 대상으로 하였다. 본 연구에서는 열복합 증류탑의 설계방법을 제시하고 HYSYS를 이용하여 계산된 에너지 사용량을 비교하였다. 동일한 증류단수를 사용하였을 때 열복합 증류 시스템이 에너지 사용량을 28.2% 절감할 수 있음을 알았으며, 엑서지 손실은 10.4% 더 많았다. 엑서지 손실의 증가는 열복합 증류탑의 양방향 연결 흐름에 의한 증류단 내에서의 추가적인 혼합과 주탑 하부에서의 압력상승에 의한 재비기에서의 온도 상승이 주요 원인이다.