• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1146-1151
• /
• 2004

Measurements of OH chemiluminescence in an atmospheric pressure, laboratory-scale dump combustor at equivalence ratios ranging from 0.63 to 0.89 were reported. The signal from the first electronically excited state of OH to ground state was detected through a band-pass filter with an ICCD. The objectives of this study are two: One is to see the effects of equivalence ratio on global heat release rate and local Rayleigh index distribution. To get the local Rayleigh index distribution, the line-of-sight images were inverted by tomographic method, such as Abel de-convolution. Another aim is to investigate the validity of using OH chemiluminescence acquired with an ICCD as a qualitative measure of local heat release. For constant inlet velocity and temperature, the overall intensities of OH emission acquired at different equivalence ratio showed periodic and higher value at high equivalence ratio. OH intensity averaged over one period of pressure increased exponentially with equivalence ratio. Local Rayleigh index distribution clearly showed the region of amplifying or damping the combustion instability as equivalence ratio increased. It could provide an information/insights on active control such as secondary fuel injection. Finally, local heat release rate derived from reconstructed OH images were presented for typical locations.

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.214-221
• /
• 2003

In this study, based on the effect of the interaction of fracture mechanics by graphite and fatigue limit phenomena of the microscopic observation various matrix structure, spheroidal ratio, size of graphite and distribution etc. parameters containd with Ductile Cast Iron. Therefore, in this study, different ferrite-pearlite matrix structure and spheroidal ratio of graphite of 70%, 80% and 90%, GCD40, GCD45-1 and GCD45-2 series and three different ferrite-pearlite matrix structure, GCD 45-3, GCD 50, GCD 60 series, all of which contain more than 90% spheroidal ratio of graphite, were used to obtain the correlation between mean size of spheroidal graphite and fatigue strength. (1) 73% pearlite structure had the highest fatigue limitation while 36% pearlite structure had the lowest fatigue limitation among ferrite-pearlite matrix. the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 10%, distribution range of fatigue life was small in same stress level. (2) (equation omitted) of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of (equation omitted) may be used as a guideline for the control of inclusion size in the steelmaking processes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.269-273
• /
• 2011

본 논문에서는 대향류 매니폴드의 면적비에 따른 튜브형 열교환기에서의 압력강하와 유량 균일도를 분석하기위해 전산해석을 수행하였다. 유동 분배와 압력손실 특성은 입-출구 면적비에 따라 영향을 받는다. 본 연구에서, 최적의 입-출구 면적비를 선택함으로서 튜브형 열교환기의 유동 불균일도 최소와 향상된 압력손실 특성을 얻을 수 있었다.

• Journal of the Korean Data and Information Science Society
• /
• 제20권2호
• /
• pp.459-465
• /
• 2009

For an inverse double Weibull distribution which is symmetric about zero, we obtain distribution and moment of ratio of independent inverse double Weibull variables, and also obtain the cumulative distribution function and moment of a skew-symmetric inverse double Weibull distribution. And we introduce a skew-symmetric inverse double Weibull generated by a double Weibull distribution.

• Communications for Statistical Applications and Methods
• /
• 제2권2호
• /
• pp.166-175
• /
• 1995

When a neutral particle beam(NPB) aimed at the object and receive a small number of neutron signals at the detector without any errors, it obeys Poisson law. Under the two assumptions that neutral particle scattering distribution and aiming errors have a circular Gaussian distributions that neutral particle scattering distribution and aiming errors have a circular Gaussian distribution respectively, an exact probability distribution of neutral particles vecomes a Poisson-power function distribution. We study and prove some properties, such as limiting distribution, unimodality, stochastical ordering, computational recursion fornula, of this distribution. We also prove monotone likelihood ratio(MLR) property of this distribution. Its MLR property can be used to find a criteria for the hypothesis testing problem.

• 유통과학연구
• /
• 제12권6호
• /
• pp.21-29
• /
• 2014

Purpose - This research undertakes to understand the competitiveness of the steel distribution industry of both Korea and China to strengthen Korea-Sino economic cooperation, examines impediments to trade between the two countries to analyze causes which affect trade, and examines improvements in these areas to identify means of trade expansion. Through this survey of a defined period, we can identify the structural factors of trade dependence in the relationship between Korea and China. Research design, data, and methodology - The data were collected from the Korea Traders Association, the Korea Customs Office, and UN Comtrade, from which whole table indexes are calculated. The research methodology uses trade-related indexes to focus on analyzing comparative advantages based on time-series analysis statistics data (2000-2012) by using the analysis index of trade intensity index (TII), the revealed comparative advantage index (RCA), and the trade specialization index (TSI). Results - The export ratio for Korea to China was slightly higher in 2000 at 2.867, and the export ratio for Korea to China was sustained in 2005. However, it diminished gradually, reaching 1.263 in 2012. During the period 2000-2012, the indexes were maintained without any significant change. However, they still remain close to -1. In particular, in 2012 it is the closest it has ever been to -1. Therefore, China has a comparative advantage in export specialization. On the other hand, Korea has a comparative advantage in import specialization. For the research period, all indexes were much lower than 1, which means that Korea has consistently had a comparative disadvantage against China for the past 10 years when compared to other industries, even though it experienced improvement in 2000. Conclusions - The summary of conclusions based on empirical analysis research are as follows: First, per the trade intensity index of industries between the two countries, we conclude that the export ratio index in 2000 is 2.867, which means the export ratio of Korea to China is slightly higher. Furthermore, the ratios of 2.259 and 1.263 held in 2005 and 2012, respectively, meaning that the export ratio of Korea to China was maintained in 2005, but was diminishing gradually as the index in 2012 was 1.263. Second, per the trade specialization index of the steel distribution industry between Korea and China, the value was -0.379 in 2000, -0.368 in 2005 and -0.568 in 2012. Looking at the whole period of 2000-2012, the indexes remained without any significant change. However, they are still moving closer to -1. In particular, in 2012 it is the closest it has ever been to -1. Third, regarding the revealed comparative advantage index of the steel distribution industry between Korea and China, the RCA indexes in 2005 and 2012 are 0.246 and 0.306, respectively, which are still far from 1, even though the index has improved compared to the 2000's value of 0.0001. Therefore, the Korean steel distribution industry is at a significant comparative disadvantage to that of the Chinese steel distribution industry.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.47-54
• /
• 2006

H pile은 원형말뚝에 비해 항타에 의해 쉽게 관입이 되며, 높은 주면마찰력과 폐색효과를 나타내는 특징을 가지고 있다. 본 연구에서는 실내시험을 통한 화강풍화토 지반에 관입된 H형강 무리말뚝의 주면마찰력 분포특성을 관찰하는데 목적이 있다. 말뚝의 배열$(1{\times}2,\;1{\times}3,\;2{\times}2,\;2{\times}3,\;3{\times}3)$, 말뚝설치간격(2D, 4D, 6D)과 지반밀도(40%, 80%)에 따른 재하시험을 실시하였다. 실험결과 전체 재하중에 대한 주면마찰력의 분포비율은 $3{\times}3$ 무리말뚝의 경우 말뚝간격비가 증가할수록 조밀한 지반의 경우 $48{\sim}39%$, 느슨한 지반의 경우에는 $32{\sim}27%$로 각각 감소하였다 그리고 말뚝침하량에 따른 주면마찰력 분포비율은 느슨한 지반조건에서 $2{\times}2$무리말뚝의 경우 $58{\sim}33.2%$, $3{\times}3$무리말뚝의 경우 $65{\sim}38%$로 각각 감소되었다.

• 보험의학회지
• /
• 제3권1호
• /
• pp.103-141
• /
• 1986

The present study was undertaken to establish the decision standard of builds for the insured by using the ratio of weight-for-height as build index. Materials being examined were the ratio of weight-for-height being calculated from the actually measured heights and weights of a total of 15,838 insured persons who were examined medically at Honam Medical Department of Dong Bang Life Insurance Company, Ltd. from June, 1979 to September, 1985. The ratio of weight-for-height is calculated by the following formula. The ratio of weight-for-height(%)=$\frac{weight(kg){\times}100}{\{height(cm)-100\}{\times}0.9(kg)$ The results were as follows: 1. The distribution of the ratio of weight. for-height of the 15,838 insureds follows Log normal distribution being skewed to the left(the direction of underweight). 2. The ratio of weight-for-height were Log transformed to lead to a sym metrical pattern of distribution in which statistical rules are known to be applied more exactly. Thereafter, the establishment of dicision standard of builds was undertaken by using the log of the ratio of weight-for-height as build index. Through all ages in male, the ratio of weight-for-height indicating the range of standard lives including slight overweighted and underweighted lives besides normal lives is 80-130%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$ ; in female, 85-135%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$. Through all ages in male, the ratio of weight-for-height indicating the initial level of super-overweighted and super-underweighted lives is 130-150% and 75-80%,and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40% and M-25% respectively;in female, 140-160% and 75-80%, and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40%-+50% and M-25% respectively. 3. Author's rating table model for builds(a table of weight per height) is proposed. On the table, the ratings for builds, i. e. standard, super-weighted and super-underweighted lives, are listed.

• Membrane and Water Treatment
• /
• 제6권4호
• /
• pp.263-276
• /
• 2015

This paper deals with the influence of chemical oxygen demand to nitrogen ratio ((COD/N) ratio) on the performance of an membrane bioreactor. We aim at establishing relations between COD/N ratio, organisms' distribution and sludge properties (specific resistance to filtration (SRF) and membrane fouling). It is also essential to define new criteria to characterize the autotrophic microorganisms, as the measurements of apparent removal rates of ammonium seem irrelevant to characterize their specific activity. Two experiments (A and B) have been carried on a 30 L lab scale membrane bioreactor with low COD/N ratio (2.3 and 1.5). The obtained results clearly indicate the role of the COD/N ratio on the biomass distribution and performance of the membrane bioreactor. New specific criteria for characterising the autotrophic microorganisms activity, is also defined as the ratio of maximum ammonium rate to the specific oxygen uptake rate in the endogenous state for autotrophic bacteria which seem to be constant whatever the operating conditions are. They are about 24.5 to 23.8 $gN-NH_4{^+}/gO_2$, for run A and B, respectively. Moreover, the filterability of the biological suspension appear significantly lower, specific resistance to filtration and membrane fouling rate are less than $10^{14}m^{-2}$ and $0.07\;10^{12}m^{-1}.d^{-1}$ respectively, than in conventional MBR confirming the adv < antage of the membrane bioreactor functioning under low COD/N ratio.

• 산업공학
• /
• 제12권3호
• /
• pp.401-405
• /
• 1999

We present a simulation model to generate the spatial distribution of mobiles in cellular communication network. Three types of spatial distributions are considered; biased, random, and ratio-based distributions. This study also points out and corrects the critical errors performed by Das and Morgera(1997) in getting random location of mobiles. By applying a simple path loss model, the effects of our correction on the signal-to-interference(SIR) ratio are discussed. The numerical results indicate that the variation of SIR in the Das's biased distribution is larger than that of other distributions. As compared with the random distribution, the average SIR error of the biased distribution is 91.1%.