• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.581-587
• /
• 2007

In order to suggest the methodology for improving the equality of flow distribution in a distribution channel, wet tests were carried out for pilot plant which was scaled down to 1/8 of full scale distribution channel being operated in domestic K_water treatment plant. The correlation between various hydraulic variables and their effects on the equality of flow distribution was evaluated through wet tests using pilot plant. From the results of wet tests, the longitudinal baffle with orifices was installed in the distribution channel, the equality of flow distribution was improved on the condition that the Froude number in pilot plant was similar with that in the full scale channel. Also, the opening ratio of the orifices on the longitudinal baffled did not have influence on the performance of the equality of flow distribution when the average flow velocity and Froud number were relatively low (Froude number ${\fallingdotseq} 0.01$). In the other hand, the performance of the equality of flow distribution was improved with increasing the opening ration of on the longitudinal baffle under conditions of relatively high average flow velocity and high Froud number(${\gtrsim}0.1$)

• Korean Journal of Organic Agriculture
• /
• v.22 no.1
• /
• pp.25-46
• /
• 2014

Since organized living cooperative associations sold their environment-friendly agricultural products directly to independent consumers in the past, the general distribution channels such as wholesalers had difficulty in handling these products. However, the ratio of distribution via wholesale channel has been gradually increased as consumption of environment-friendly agricultural products has expanded. This study is to address vitalization of wholesale distribution for environment-friendly agricultural products by gathering previous statistical data and analysis. In addition, statistical analysis are conducted by utilizing surveys on forwarders, consumers for environment-friendly agricultural products. As a result, the products producers ship are distributed through dealers at producers sites, producers cooperatives, or food process companies, food companies, internet shopping malls, large-scale distribution companies, consumer groups such as living cooperative associations, direct outlets at consumers sites, or exports. Among the channels, the large-scale distribution companies and franchised special shops account for 47%, the general supermarkets 15.7%, and living cooperative associations 14.6% respectively. By utilizing the research results on producers and consumers, and the distribution weight by channels for environment-friendly agricultural products, the distribution channels for living cooperative associations, wholesale markets, and large scale distribution companies are compared and evaluated. As a result, the level of producers' and consumers' satisfaction for them is the lowest since the low selling price for producers and high distribution margins.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.425-431
• /
• 2009

It is very important to know the probability distribution of water-quality constituents for water-quality control and management of rivers and reservoirs effectively. The probability distribution of BOD in Anseong Stream was analyzed in this paper using Kolmogorov-Smirnov test which is widely used goodness-of-fit method. It was known that the distribution of BOD in Anseong Stream is closer to Log-normal, Gamma and Weibull distributions than Normal distribution. Normal distribution can be partially applied depending on significance level, but Log-normal, Gamma and Weibull distributions can be used in any significance level. Also the estimated Log-normal distribution of BOD at Jinwi3 station was to be compared with the measured in 2001, 2002 and 2003 years. It was revealed that the estimated probability distribution of BOD at Jinwi3 follows a theoretical distribution very well. The applicable probability distribution of BOD can be used to explain more rigorously and scientifically the achievement or violation of target concentration in TMDL(Total Maximum Daily Load).

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.669-676
• /
• 2018

Transmission system has been well studied since long time and power system techniques of distribution system are more or less derived from transmission system. However, unlike transmission systems, many practical issues are encountered in the distribution system. Considerable amount of error is observed in voltage obtained from the Feeder Remote Terminal Units (FRTUs) measured by the pole mounted PTs along the distribution feeder. Load uncertainty is also an issue in distribution system. Further, penetration of Distributed Generators (DGs) creates voltage variations in the system. Hybrid radial/ loop distribution system also make it complicated to handle distribution system. How these constraints to be handled under Distribution Automation (DAS) environment in order to obtain error free voltage is described in this paper and therefore, a new approach of voltage error correction technique has been proposed. The proposed technique utilizes reliable data from substation and the FRTUs installed in DAS. The proposed technique adopts an iterative process for voltage error correction. It has been tested and proved accurate not only for conventional radial systems but also for loop distribution systems.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.83-89
• /
• 2013

Power distribution system has been changed from radial system to closed loop or mesh system due to connection of distributed generation growth. Data from distribution equipments which are installed at distribution line is required to be accurate for the performance of DMS(Distribution Management System). This paper analyzes the voltage measurement data from distribution equipment. However, the results of the analysis are confirmed to have some errors in voltage measurement data from distribution equipment. These errors come from aging of voltage sensor in distribution equipment and inaccurate data transfer to FRTU(feeder remote terminal unit) through the controller. The main problem is that the voltage measurement data of distribution equipment can not be assessed after it's first installation at the distribution line. The voltage measurement accuracy assessment system is to assess the voltage measurement data from distribution equipment on hot-line. This study had a field test to verify the performance of system.

• Journal of Distribution Science
• /
• v.20 no.8
• /
• pp.59-67
• /
• 2022

Purpose: This study identifies how twelve key success factors of distribution strategies for community enterprises in Thailand achieve higher performances. Research design, data, and methodology: The samples in this study were 400 entrepreneurs throughout the country. The instrument for data elicitation was a questionnaire. The descriptive and inferential statistics for data analysis were percentage, mean, standard deviation, T-Test, F-Test, multiple regression, and multiple correlations. Results: The results revealed that, overall, the samples showed high opinions on online distribution strategies in all aspects. In detail, the three highest factors were as follows: 1) electronic satisfaction, 2) product characteristics and electronic trust, and 3) the quality and success in online distribution. In detail, the three highest aspects of online distribution success were customer loyalty, financial performance, and work management, respectively. The online distribution strategies influencing community enterprises' success were electronic trust, electronic loyalty, social information, electronic satisfaction, and online distribution tools, which had a statistical significance of 71. Conclusions: This research has made an essential contribution to community enterprise entrepreneurs should focus on and adopt these 8P+4ODS concepts to increase sales, maintain brand loyalty of existing customers, get new customers, develop learning, and improve the working potentials of community enterprise entrepreneurs.

• Journal of Distribution Science
• /
• v.20 no.7
• /
• pp.1-9
• /
• 2022

Purpose: This study aims to examine the effect of intellectual capital on both internal and external collaboration and its impact on distribution performance enhancement in public sector. Research design, data, and methodology: The study applied quantitative approach with the help of AMOS Structural Equation Modelling. The unit of analysis is the Indonesian local government. The research involved 430 leaders from local government agencies as respondents. Results: This study found that intellectual capital positively influences both internal and external collaboration as well as distribution performance. Furthermore, the current research confirms the different effect of internal collaboration and external collaboration on distribution performance; internal collaboration positively affects distribution performance, while the external one does not. Eventually, internal collaboration mediates the indirect effect of intellectual capital on distribution performance, whereas the external collaboration does not. Conclusions: This study strengthens and complements the lean stream by confirming the role of intellectual capital as critical antecedent of internal collaboration, external collaboration, and distribution performance. Moreover, this research underlines the critical role of internal collaboration as the intercourse which supports distribution performance enhancement in public sector. Lastly, the study highlights the benefits of external collaboration in distribution practice if appropriately and wisely managed.

• Journal of Distribution Science
• /
• v.21 no.2
• /
• pp.53-63
• /
• 2023

Purpose: This study aims to determine the effect of Customer Experience Management (CEM) on the distribution of Marketing Performance mediated by Digital Business Innovation (DBI), Digital Operational Excellence (DOE), and Digital Value Co-Creation (DVC) in Indonesia Information & Technology (IT) industry. Research design, data, and methodology: This research was conducted in two stages, namely exploratory and explanatory on IT companies in Indonesia. The authors took 132 samples using proportionate random sampling method in three groups of companies. Results: The results showed that CEM had no significant positive effect on the distribution of Marketing Performance. CEM has no direct effect on the distribution of Marketing Performance through the mediation of DBI. CEM has direct effect on the distribution of Marketing Performance through the mediation of DOE and DVC. DBI has no significant effect in increasing the distribution of Marketing Performance. However, DOE and DVC have a significant effect in increasing the distribution of Marketing Performance. Conclusion: The distribution of Marketing Performance can be indicated better through CEM through mediation.

• Journal of Distribution Science
• /
• v.21 no.6
• /
• pp.69-81
• /
• 2023

Purpose: The study investigates the moderating impact of interpersonal mindfulness (IM) on the link between perceived similarity (OPS), physical appearance (OPA), and suitable behavior (OSB) - three key factors of other consumer perception (OCP) and brand experience (BE) in distribution of OCP and brand. Research design, data, and methodology: This study collected data from 612 consumers at shopping malls. SmartPLS 3.3.9 software were used to assess the measurement model and structural model. Results: According to the study's findings, IM has a negative modality in the impact between BE and OPS, OPA, and OSB. That also demonstrates how distribution of OCP and brand can affect a person's brand experience. Conclusions: The distribution of OCP and IM interactions have a significant influence on the brand experience in brand distribution. The study's results show that IM including mindfulness will function as a moderator between perceived similarity, physical appearance, suitable behavior regarded proper by other consumers, and brand experiences; therefore, they impact to brand distribution. The findings give a foundation for further IM research and add to the brand distribution theory that already exists. The findings also have some managerial implications in brand distribution.