• Structural Engineering and Mechanics
• /
• v.84 no.3
• /
• pp.423-435
• /
• 2022

In this article, we present torsion-bending analysis of a composite FGM beam with an open section, according to the advanced and refined theory of 1D / 3D beams based on the 3D Saint-Venant's solution and taking into account the edge effects. The (initially one-dimensional) model contains a set of three-dimensional (3D) displacement modes of the cross section, reflecting its 3D mechanical behaviour. The modes are taken into account depending on the mechanical characteristics and the geometrical form of the cross-section of the composite FGM beam. The model considered is implemented on the CSB (Cross-Section and Beam Analysis) software package. It is based on the RBT/SV theory (Refined Beam Theory on Saint-Venant principle) of FGM beams. The mechanical and physical characteristics of the FGM beam continuously vary, depending on a power-law distribution, across the thickness of the beam. We compare the numerical results obtained by the three-beam theories, namely: The Classical Beam Theory of Saint-Venant (Classical Beam Theory CBT), the theory of refined beams (Refined Beam Theory RBT), and the theory of refined beams, using the higher (high) modes of distortion of the cross-section (Refined Beam Theory using distorted modes RBTd). The results obtained confirm a clear difference between those obtained by the three models at the level of the supports. Further from the support, the results of RBT and RBTd are of the same order, whereas those of CBT remains far from those of higher-order theories. The 3D stresses, strains and displacements, obtained by the present study, reflect the 3D behaviour of FGM beams well, despite the initially 1D nature of the problem. A validation example also shows a very good agreement of the proposed models with other models (classical or higher-order beam theory) and Carrera Unified Formulation 1D-beam model with Lagrange Expansion functions (CUF-LE).

• Journal of the Korean Geotechnical Society
• /
• v.26 no.4
• /
• pp.37-45
• /
• 2010

Salt cementation, a typical naturally-cemented phenomenon, may occur due to water evaporation under the change of climate. Capillary force may influence the distribution of cement in granular soils. This study addresses the effect of capillary force on salt cementation using five different techniques: cone penetration test, electrical conductivity measurement, photographic imaging technique, nondestructive imaging technique, and process monitoring by elastic wave. Glass beads modeling a particulate media was mixed with salt water and then dried in an oven to create the cementation condition. Experimental results show that salt cementation highly concentrates at the top of the small particle size specimens and at the middle or the bottom of the large particle specimens. The predicted capillary heights are similar to the locations of high salt concentration in the cemented specimens. Five suggested methods show that the behavior of salt-cemented granular media heavily depends on the capillary force.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.44-51
• /
• 2022

In this study, 5-axis machining was proposed as a method for manufacturing a nozzle with a curved shape, and flow analysis and structural analysis were used for structural validation of the manufactured geometry. The program used for CFD obtained the internal temperature and pressure distribution of the nozzle using STAR-CCM+ and used it as the boundary condition for structural analysis. For structural analysis, the commercial program NASTRAN was used, and stress was calculated using the von-mises technique. Based on the maximum stress value generated, the safety margin was 0.78 and the safety margin of the bearing stress was 46.8. In addition, the creep life was calculated as 9.97 x 1012 hours using the Larson-Miller parametric method and applying the maximum stress value of 187 MPa and the exhaust gas perfectly mixed temperature of 463 K.

• The Journal of Economics, Marketing and Management
• /
• v.11 no.3
• /
• pp.47-66
• /
• 2023

Purpose: The purpose of this study is to identify research trends related to ESG by domestic and overseas researchers so far, and to present research directions and clues for the possibility of applying ESG to Korean companies in the future and ESG practice through comparison of derived topics. Research design, data and methodology: In this study, as of October 20, 2022, after searching for the keyword 'ESG' in 'scienceON', 341 domestic papers with English abstracts and 1,173 overseas papers were extracted. For analysis, word frequency analysis, word co-occurrence frequency analysis, BERTopic, LDA, and OLS regression analysis were performed to confirm trends for each topic using Python 3.7. Results: As a result of word frequency analysis, It was found that words such as management, company, performance, and value were commonly used in both domestic and overseas papers. In domestic papers, words such as activity and responsibility, and in overseas papers, words such as sustainability, impact, and development were included in the top 20 words. As a result of analyzing the co-occurrence frequency of words, it was confirmed that domestic papers were related mainly to words such as company, management, and activity, and overseas papers were related to words such as investment, sustainability, and performance. As a result of topic modeling, 3 topics such as named ESG from the corporate perspective were derived for domestic papers, and a total of 7 topics such as named sustainable investment for overseas papers were derived. As a result of the annual trend analysis, each topic did not show a relatively increasing or decreasing tendency, confirming that all topics were neutral. Conclusions: The results of this study confirmed that although it is desirable that domestic papers have recently started research on consumers, the subject diversity is lower than that of overseas papers. Therefore, it is suggested that future research needs to approach various topics such as forecasting future risks related to ESG and corporate evaluation methods.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2023

Ultrasound-assisted dissolution of U₃O₈ powder in carbonate solution was explored to determine if and how ultrasound act during the dissolution. The variation of U₃O₈ solid particles and uranyl complexes under ultrasound treatment and magnetic stirring was observed in carbonate media. The results show that the use of ultrasound can increase the solubility and dissolution rate of U₃O₈ powder than that under magnetic stirring. The crush of U₃O₈ particles and the reduction of the activation energy (Ea, kJ/mol) of U₃O₈ dissolution reaction were observed, which both play an important role in the ultrasonic-assisted dissolution of U₃O₈ in carbonate-peroxide solution. Meanwhile, there is no observation of the ultrasound effect on the distribution of uranyl species and hydrolysis of uranyl complexes during the ultrasound treatment in carbonate-peroxide solution. Although the generation of ·OH radicals under ultrasound (22 ± 2 kHz) was observed, the oxidation of ·OH had little effect on the dissolution of U₃O₈ in the carbonate-peroxide solution system.

• The Plant Pathology Journal
• /
• v.39 no.2
• /
• pp.171-180
• /
• 2023

Spring black stem and leaf spot, caused by Phoma medicaginis, is an issue in annual Medicago species. Therefore, in this study, we analyzed the response to P. medicaginis infection in a collection of 46 lines of three annual Medicago species (M. truncatula, M. ciliaris, and M. polymorpha) showing different geographic distribution in Tunisia. The reaction in the host to the disease is explained by the effects based on plant species, lines nested within species, treatment, the interaction of species × treatment, and the interaction of lines nested within species × treatment. Medicago ciliaris was the least affected for aerial growth under infection. Furthermore, the largest variation within species was found for M. truncatula under both conditions. Principal component analysis and hierarchical classification showed that M. ciliaris lines formed a separate group under control treatment and P. medicaginis infection and they are the most vigorous in growth. These results indicate that M. ciliaris is the least susceptible in response to P. medicaginis infection among the three Medicago species investigated here, which can be used as a good candidate in crop rotation to reduce disease pressure in the field and as a source of P. medicaginis resistance for the improvement of forage legumes.

• Journal of Sasang Constitutional Medicine
• /
• v.34 no.1
• /
• pp.37-45
• /
• 2022

Objectives The purpose of this study was to reveal that Sasang constitution(SC) was associated with hypertension and pre-hypertension and could be a risk factor. Methods We introduced this study to educational personnel in D university in Daejeon, and 275 subjects joined this study. The SC classification was conducted with KS 15 questionnaire. The subjected measured the blood pressure with Jawon medical device automatically after 10 minute rest. The hypertension and pre-hypertension was classified by the guide of the Seventh Report of the Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure. The frequency analysis and T-test was used in general characteristics, and chi-square test was also used between SC and pre-hypertension and hypertension. Logistic regression was used to calculate the odds ratios (ORs) and 95% confidence interval (95% CI) for pre-hypertension and hypertension. Results The number of Taeeumin(TE), Soeumin(SE), and Soyangin(SY) was 142, 71, and 61 respectively. There was significantly different in systolic and diastolic blood pressure among SC types(p<.001). The distribution of the normal group, pre-hypertension and hypertension group by SC types was significantly different (p<.001). The ORs of TE was significantly increased (ORs 4.039, 95% CI=2.019-8.082 in pre-hypertension and ORs 4.235, 95% CI=1.581-11.348 in hypertension) compared with SE(p<.001), and after adjusting gender and smoking habit, it was still significantly different(p<.001). Conclusions It is possible that SC, especially TE could be a risk factor both pre-hypertension and hypertension.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2022

Securities and investment services have and use large data. Investors started to invest through their own analysis methods. There are 22 major securities and investment companies in Korea and only 6 companies support open API. Python is effective for requesting and receiving, analyzing text data from open API. Daishin Securities Co. is the only open API that officially supports Python, and eBest Investment & Securities Co. unofficially supports Python. There are two important differences between CYBOS plus of Daishin Securities Co. and xingAPI of eBest Investment & Securities Co. First, we must log in to CYBOS plus to access the server of Daishin Securities Co. And the python program does not require a logon. However, to receive data using xingAPI, users log on in an individual Python program. Second, CYBOS plus receives data in a Request/Reply method, and zingAPI receives data through events. It can be thought that these points will show a difference in response time. Response time is important to users who use open APIs. Data were measured from August 5, 2021, to February 3, 2022. For each measurement, 15 repeated measurements were taken to obtain 420 measurements. To increase the accuracy of the study, both APIs were measured alternately under same conditions. A paired t-test was performed to test the hypothesis that the null hypothesis is there was no difference in means. The p-value is 0.2961, we do not reject null hypothesis. Therefore, we can see that there is no significant difference between means. From the boxplot, we can see that the distribution of the response time of eBest is more spread out than that of Cybos, and the position of the center is slightly lower. CYBOS plus has no restrictions on Python programming, but xingAPI has some limits because it indirectly supports Python programming. For example, there is a limit to receiving more than one current price.

• ALGAE
• /
• v.37 no.4
• /
• pp.249-264
• /
• 2022

Two genera of the Rhodymeniales, Halopeltis and Leptofauchea, are here reported for the first time from the Hawaiian Islands and represent the deepest records for both genera. Molecular phylogenetic analyses of cytochrome oxidase subunit I (COI), rbcL, and large subunit ribosomal DNA (LSU) sequences for Hawaiian specimens of Leptofauchea revealed one well-supported clade of Hawaiian specimens and three additional lineages. One of these clades is described here as Leptofauchea huawelau sp. nov., and is thus far known only from mesophotic depths at Penguin Bank in the Main Hawaiian Islands. L. huawelau sp. nov. is up to 21 cm, and is the largest known species. An additional lineage identified in the LSU and rbcL analyses corresponds to the recently described L. lucida from Western Australia, and is a new record for Hawai'i. Hawaiian Halopeltis formed a well-supported clade along with H. adnata from Korea, the recently described H. tanakae from mesophotic depths in Japan, and H. willisii from North Carolina, and is here described as Halopeltis nuahilihilia sp. nov. H. nuahilihilia sp. nov. has a distinctive morphology of narrow vegetative axes that harbor constrictions along their length. The current distribution of H. nuahilihilia includes mesophotic depths around W. Maui, W. Moloka'i, and the island of Hawai'i in the Main Hawaiian Islands. Few reproductive characters were observed because of the small number of specimens available; however, both species are distinct based on phylogeny and morphology. These descriptions further emphasize the Hawaiian mesophotic zone as a location harboring many undescribed species of marine macroalgae.

• Computers and Concrete
• /
• v.31 no.5
• /
• pp.433-442
• /
• 2023

This study presents the visually observed behavior of fibers embedded in concrete samples that were subjected to a flexural bending test. Three types of fibers such as macro polypropylene, macro polyethylene, and the hybrid of steel and polyvinyl alcohol were mixed with cement by a designated mix ratio to prepare a total of nine specimens of each. The bending test was conducted by following ASTM C1609 with a net deflection of 2, 4, and 7 mm. The X-ray computed tomography (XCT) was carried out for 7 mm-deflection specimens. The original XCT images were post-processed to denoise the beam-hardening effect. Then, fiber, crack, and void were semi-manually segmented. The hybrid specimen showed the highest toughness compared to the other two types. Debonding based on 2D XCT sliced images was commonly observed for all three groups. The cement matrix near the crack surface often involved partially localized breakage in conjunction with debonding. The pullout was predominant for steel fibers that were partially slipped toward the crack. Crack bridging and rupture were not found presumably due to the image resolution and the level of energy dissipation for poly-fibers, while the XCT imaging was advantageous in evaluating the distribution and behavior of various fibers upon bending for fiber-reinforced concrete beam elements.