• Journal of The Korean Astronomical Society
• /
• v.25 no.2
• /
• pp.111-128
• /
• 1992

Infrared emissions from spherical dust, clouds are calculated using quasi-diffusion method. We have employed graphite-silicate mixture with power-law size distribution for the dust model. The grains are assumed to be heated and cooled by radiative processes only. The primary heating source is diffuse interstellar radiation field. hut the cases with an embedded source are also considered. Since graphite grains have higher temperature than silicate grains, the observed IR emission is mainly due to graphite grains, unless the fraction of graphite grains is negligibly small. The color temperature of Bok globules obtained from IRAS 60 and $100{\mu}m$ data are found to be consistent with the dust cloud with graphite-silicate mixture exposed to average interstellar radiation field. The color temperature is sensitive to the external radiation field, but rather insensitive to the size distribution of the grains. We found that the density distribution can be recovered outside the beam size using the inversion technique that assumes negligible optical depth. However, the information within the beam size is lost for if beam convolved intensity distributions are used in deriving density profile.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.4
• /
• pp.287-298
• /
• 2007

A two-dimensional treatment of the potential distribution under the depletion approximation is presented for poly-crystalline silicon thin film transistors. Green's function approach is adopted to solve the two-dimensional Poisson's equation. The solution for the potential distribution is derived using Neumann's boundary condition at the silicon-silicon di-oxide interface. The developed model gives insight into device behavior due to the effects of traps and grain-boundaries. Also short-channel effects and drain induced barrier lowering effects are incorporated in the model. The potential distribution and electric field variation with various device parameters is shown. An analysis of threshold voltage is also presented. The results obtained show good agreement with simulated results and numerical modeling based on the finite difference method, thus demonstrating the validity of our model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1683-1689
• /
• 2014

In this paper, we propose an image processing based time-frequency domain reflectometry(TFDR) in order to estimate the fault location of a cable. The Wigner-Ville distribution is used for analysis in both the time domain and the frequency domain when the conventional TFDR estimates the fault location in a cable. However, the Winger-Ville distribution is a bi-linear function, and hence the cross-term is occurred. The conventional TFDR cannot estimate the accurate fault location due to the cross-term in case the fault location is close to the position where the reference signal is applied to the cable. The proposed method can reduce the cross-term effectively using binarization and morphological image processing, and can estimate the fault location more accurately using the template matching based cross correlation compared to the conventional TFDR. To prove the performance of the proposed method, the actual experiments are carried out in some cases.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.5-8
• /
• 2015

Purpose - The purpose of this paper is to review, analyze, and learn from the most recent cases of plagiarism and to identify and promote ethical practices in research and publication. Research design, data, and methodology - This is a case study, an analytical approach, which focuses on analyzing the most recent cases of plagiarism to identify ethical issues and concerns in journal publication practices. Results - Despite the availability of many software and web-based applications and programs to detect plagiarism, there is no universal or perfect plagiarism detection application available to ease the editorial responsibility. Lack of understanding the concept and ignorance of plagiarism were the main reasons for the cases of plagiarism. Conclusions - Some of the plagiarism cases reveal a lack of knowledge in proper application of in-text citations and references, including quoting, requiting, paraphrasing, and citing sources, etc. Furthermore, the need for recognizing and considering the distorted and falsified primary and secondary research data as plagiarism is essential to enhance ethical practices in journal publication.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.640-645
• /
• 2006

Polyethylene of bimodal molecular weight distribution was irradiated with an electron beam. The thermal and mechanical properties were examined by DSC, small and wide angle X-ray scattering and static tensile test according to the crystal morphology of the irradiated samples. The crystal morphology change upon irradiation, as revealed by wide angle X-ray scattering, correlated well with the changes in melting enthalpy, whereas the lamellar thickness and the amorphous gap thickness remained virtually unchanged at irradiation doses up to 500 kGy. Crosslinks in the crystal domains became evident at an energy level of 250 kGy, resulting in reduced crystallinity and crystal size of the (110) and (200) planes. The samples became stiff and brittle with increased irradiation dose, which seem to be more relevant to the amount of cross links than the crystal morphology changes.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.4
• /
• pp.268-275
• /
• 2013

This text was analyzed and investigated the distribution of medicinal plants in Cheongoksan Bonghwagun Korea, in order to search the medicinal resources that are used in modern medicine. Medicinal plants of the Korean Pharmacopoeia (10th edition) distributed in Cheongoksan Bonghwagun were consisted of 93 taxa ; 82 species, 10 varieties, 1 forma of 79 genus, 50 families. In medicinal plants of the Korean Pharmacopoeia, rate of native species and exotic species was 89.2% (83 taxa) and 10.8% (10 taxa) respectively. Family classification was the most of compositae of 8 taxa, and life form classification was most of herb of hemicryptophyte species. The classification by using parts were 34 taxa of root use and the classification of efficacy utilization was 24 taxa of Cheongyeolyak (heat-clearing drug) use.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1210-1216
• /
• 2011

The purpose of this study is to establish the analysis method for prediction of temperature during cryogenic heat treatment. Experimental cryogenic heat treatment is conducted to observe the phenomena such as boiling of fluid, ice layer on the material surface and to measure the temperature distribution of Al6061 tube. The CFD analysis considering the observed phenomena in the experiment is performed to predict the temperature distribution and convection heat transfer coefficient at each stage of cryogenic heat treatment, in which the boiling of fluid is considered as the multi-phase condition of vapour and liquid. The formation of ice layer on the tube surface is also modeled between material and fluid. The predicted results are in good agreement with the experimental ones. From the results, it is shown that the analysis method can predict the temperature distribution and convection heat transfer coefficient during cryogenic heat treatment.

• Journal of Korean Society on Water Environment
• /
• v.29 no.5
• /
• pp.618-624
• /
• 2013

This study was conducted to suggest the concentration distribution of organic matters in 348 tributaries of Nakdong River, and to review the validity of the conversion of organic matter indexes. The average concentration of organic matters in the tributaries was TOC 2.4 mgC/L, DOC 2.1 mgC/L, COD 1.0 mgC/L, respectively. DOC ratio to TOC is 87% and COD ratio is 44%. First tributaries shows higher organic pollution than second tributaries. The correlation between TOC and COD was relatively high as 0.796 (p < 0.01, n = 670). Based upon these results, a regression analysis was conducted. The results showed that TOC concentration was 2.5 times higher than COD concentration. In conclusion, it is appropriate to use TOC for the management of all organic matters. Furthermore, there is a need to build organic matter-related Databases for more rivers so as to establish TOC standards and manage the water quality.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.250-260
• /
• 2015

Purpose: Dual cylindrical microwave chambers equipped with an ohmic heating tube were designed and fabricated to maximize the electric field strength for expeditious heat treatment of particulate foods. Methods: The efficacy of the combination heater was investigated by simulating the electric field distribution by using COMSOL Multiphysics software. Results: All components of the designed microwave heating unit were suitable for transmitting maximal microwave power to the load. The simulated electric field distribution implied that single-mode microwave heating would be sufficient for the steady generation of a highly localized heating zone in the cavity. During impedance matching, the calculated reflection coefficient ($S_{11}$) was small, possibly implying minimal power loss and wave reflection in the designed microwave heating chamber. Conclusions: This study demonstrates the possibility of concentrating the microwave power at the centerline for a single-frequency microwave, for thermal treatment of multiphase foods without attenuating the microwave power.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.373-384
• /
• 2007

The purpose of this study was to analyse the stress distribution on the craniofacial suture and cranium after application of RME. Twelve years and six months old boy and twenty years old adult male were chosen for taking computed-tomography for FEM. From DICOM visual information, it was processed by 3-dimensional image construction program Mimics 10.01. Hounsfield unit(HU) which shows gray scale of CT image is picked for revealing mechanical properties of each model. The models have been accomplished with various range of physical properties. After applying 5.0 mm expansion, the maxillary complex model was obeserved for analyzing displacement and stress distribution of the model. The amount of transverse expansion of child and adult maxilla is different according to its location. It appears that it decreases gradually with the distance from separation site. In child, maximum compressive stress located broad area in zygomatic buttress department and the ends of frontal process of maxilla, pterygoid plate, and bones surrounding orbit. However, in adult maximum compressive stress was located smaller area and the stres was higher than child.