• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.103-112
• /
• 2014

Area average rainfall estimation is important to determine the exact amount of the available water resources and the essential input data for rainfall-runoff analysis. Like that, the necessary criterion for accurate area average rainfall estimate is the uniform spatial distribution of raingauge network. In this study, we suggest the spatial distribution evaluation methodology of raingauge network to estimate better area average rainfall and after the suggested method is applied to Han River and Geum River basin. The spatial distribution of rainfall network can be quantified by the nearest neighbor index. In order to evaluate the effects of the spatial distribution of rainfall network by each basin, area average rainfall was estimated by arithmetic mean method, the Thiessen's weighting method and estimation theory for 2013's rainfall event, and evaluated the involved errors by each cases. As a result, it can be found that the estimation error at the best basin of spatial distribution was lower than the worst basin of spatial distribution.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.219-229
• /
• 2010

There have been many researches on the risk management due to rapid increase of various risk factors for financial assets. Aa a method for comprehensive risk management, Value at Risk (VaR) is developed. For estimation of VaR, it is important task to solve the problem of asymmetric distribution of the return rate with heavy tail. Most real distributions of the return rate have high positive kurtosis and low negative skewness. In this paper, some alternative distributions are used to be fitted to real distributions of the return rate of financial asset. And estimates of VaR obtained by using these fitting distributions are compared with those obtained from real distribution. It is found that normal mixture distribution is the most fitted where its skewness and kurtosis of practical distribution are close to real ones, and the VaR estimation using normal mixture distribution is more accurate than any others using other distributions including normal distribution.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.157-167
• /
• 2011

Currently, interest on physical distribution is increasing due to burden of oil cost increases as oil price rises day by day. As interest grows, there are number of studies have been conducting on saving the cost of distribution. On the other hand, number of study on service of distribution is insufficient. Actually, subject of service of physical distribution have been studied by number of survey organizations, research organizations and mass media. Although, configuration for each organization is different from each other and it is hard to measure objective satisfactory factor of customers. This means needs for constructing standardized measuring tool as well as research on measuring service quality of distribution is not active. Therefore, this research is to compare and analyze compatibility of service quality measuring using SERVQUAL and SERVPERF and trying to clarify differences affected by importance service quality by each level to actual service quality. Also, this research is to make basic and standardized measuring model to improve quality of physical distribution especially using analysis of service quality and customer satisfaction of pallet pool service which contributes rationalization of distribution and reduce the cost by standardizing specification and size of pallet, allowing sharing of pallet. To conduct this research, case study of a company A is used where it is in a pallet pool business. Using this example, the goal is to give help on pallet pool business a strategic exercise if the business by point out major factors that affect customer satisfaction by collecting customer assessment along with examination of SERVQUAL and SERVPERF in measuring service quality if pallet pool service.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.895-904
• /
• 2019

It has been well recognized that extreme rainfall process often features a nonstationary behavior, which may not be effectively modeled within a stationary frequency modeling framework. Moreover, extreme rainfall events are often described by a two (or more)-component mixture distribution which can be attributed to the distinct rainfall patterns associated with summer monsoons and tropical cyclones. In this perspective, this study explores a Mixture Distribution based Nonstationary Frequency (MDNF) model in a changing rainfall patterns within a Bayesian framework. Subsequently, the MDNF model can effectively account for the time-varying moments (e.g. location parameter) of the Gumbel distribution in a two (or more)-component mixture distribution. The performance of the MDNF model was evaluated by various statistical measures, compared with frequency model based on both stationary and nonstationary mixture distributions. A comparison of the results highlighted that the MDNF model substantially improved the overall performance, confirming the assumption that the extreme rainfall patterns might have a distinct nonstationarity.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.302-315
• /
• 2023

Distribution characteristics and altitudinal gradient of four species (E. strigata, E. separigata, E. orientalis-sachalinensis group) of the mayfly genus Ephemera (Order Ephemeroptera) were analyzed with probability distribution models (exponential, normal, lognormal, logistic, Weibull, gamma, beta, Gumbel). Data was collected from 23,846 sampling units of 6,787 sites in Korea from 2010 to 2021. The beta distribution model showed the best fit for positively skewed E. orientalis-sachalinensis and little-skewed E. strigata along with altitudinal gradient. The reversed lognormal distribution model showed the best-fit for negatively skewed E. separigata. E. orientalis-sachalinensis distributed at the range of altitude 1~700 m (mean 251 m, median 226 m, mode 124 m, and standard deviation 161 m), E. strigata distributed at the range of altitude 5~871 m (mean 474 m, median 478 m, mode 492 m, and standard deviation 200 m), E. separigata distributed at the range of altitude 7~846 m (mean 620 m, median 659 m, mode 760 m, and standard deviation 181 m). Altitudinal habitat suitability ranges were estimated to be 42~257 m for E. orientalis-sachalinensis, 335~644 m for E. strigata, and 641~824 m for E. separigata. Based on the altitudinal spectrum of suitability and altitude-related temperature analysis results, E. orientalis-sachalinensis was estimated to be thermophilic, E. strigata to be mesophilic, and E. separigata to be thermophobic. This is the first national-scale evaluation of the altitudinal distribution of Ephemera in Korea. These results will be used in a further research study on altitudinal shift of the species of Ephemera under climate change.

• Journal of Environmental Impact Assessment
• /
• v.8 no.2
• /
• pp.31-44
• /
• 1999

Atmospheric dry deposition flux and ambient particle mass size distribution were measured to evaluate the impact of atmospheric deposition around the Nanjido landfill sites. Wind direction affects greatly on the variation of mass flux and mass size distribution and made two times higher when the wind was blown from the road side. The effect of Nanjido landfill on the mass size distribution was significant comparing to simultaneously measured mass size distribution at the other sampling site. The results showed that the particle diameter bigger than $10{\mu}m$ explained the majority of atmospheric dry deposition flux. A survey was also carried out to investigate the contamination of soils in a completed Nanjido landfill. The chemical properties of the soil analyzed in the present study include pH, oxidation-reduction potential (ORP), anion and cation concentration, total organic carbon(TOC), and some-metal elements concentrations were analyzed. Microbial activity in the soils was also evaluated by measuring dehydrogenase activities. TOC in the soil contaminated with leachate was $467.0{\mu}g/g-dry$ soil, and the TOC in the soil, where Nanjido landfill gases were emitted from, was $675{\mu}g/g-dry$ soil. The highest microbial activity of $968.0{\sim}2147{\mu}g-TPF/g-dry$ soil day was found in the soil spouting Nanjido landfill gases. Compared with those in the uncontaminated soil, the concentrations of Cr, Cu and Ph in the contaminated soil were higher.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.1
• /
• pp.12-21
• /
• 2012

The purpose of this study is to understand distribution of ozone concentration in the south coastal region of Korea by evaluating ozone spatial distribution in the upper air using aircraft. Sampling was carried out from May to August in 2009. The average concentration of ozone in the upper air was ranged from 32.3~90.8 ppb with its maximum concentration of 132 ppb. When it comes to the spatial distribution of ozone, ambient concentration was high in the air, 1,000 m and 500 m above the southern sea near the Gwangyang Bay area and emission sources, respectively. Daily mean concentration of NOy was 6.7~24.2 ppb and that of CO was 0.152~0.487 ppm. In addition, the concentration was appeared to be relatively high in the upper air of industrial regions and the southern seas. Meanwhile, the concentration of both $NO_y$ and CO was high in the upper air of the emission sources regardless of latitude. As for PAN, its daily mean concentration ranged between 0.1 and 0.6 ppb with overall mean concentration of 0.2 ppb. The average concentration of VOCs was 48 ppb, and the concentration of toluene and m,p-Xylene were higher than other components.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.1
• /
• pp.54-58
• /
• 2005

Objective: The purpose of this study is to determine the time evolution and distribution of cerebral apoptosis using the middle cerebral artery occlusion model in rats. Methods: A total of twenty four male rats - with 2, 3, 4, 6, 8, 12, 24 and 48 hours of middle cerebral artery occlusion respectively - were studied. The terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate-biotin nick-end labeling(TUNEL) method was used for the observation of the apoptotic cells. The apoptotic ratio was calculated and the distribution of apoptosis was inspected in the pyriform cortex, basal ganglia and middle cerebral artery territory cortex. The rats were divided into three groups(Group I : $2{\sim}4$ hours of occlusion, Group II : $6{\sim}$12 hours of occlusion, Group III : $24{\sim}48$ hours of occlusion). Results: In this study, the proportion of apoptosis increased with the duration of middle cerebral artery occlusion and reached a maximum after about 12 hours of middle cerebral artery occlusion. The mean values of the apoptotic ratio were $30.7{\pm}11.3%$ in group I, $60.8{\pm}2.6%$ in group II and $48.7{\pm}0.7%$ in group III. The distribution of apoptosis differed in the pyriform cortex, basal ganglia and middle cerebral artery territory cortex according to the duration of time of the middle cerebral artery occlusion. Conclusion: In the middle cerebral artery occlusion model of the rats, apoptosis is found to increase according to the occlusion time, reaching a peak after 6 hours, and the distribution of apoptosis changed from the pyriform cortex to the basal ganglia and middle cerebral artery territory cortex.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.373-379
• /
• 2006

Fiber characteristics and fiber distribution of thermomechanical pulp(TMP), bisulfite chemithermomechanical pulp(bisulfite CTMP), neutral sulfite chemithermomechanical pulp(neutral sulfite CTMP) from kenaf(Hibiscus cannabinus L., Malvaceae) cultivar Tainug-2 cultivated in the reclaimed land of Korea were examined to use effectively nonwood fibers as an alternative raw material sources for papermaking. Yields of TMP and CTMP from kenaf were lower than those of TMP from hardwoods and CTMP from softwoods and hardwoods. Bark fibers of kenaf cultivar Tainung-2 ranged 2.04 to 2.30 mm long and $18.7{\sim}19.7{\mu}m$ width. Core fibers averaged 0.63 to 0.80 mm long and $29.5{\sim}31.4{\mu}m$ wide. Coarseness of bark fiber was higher than that of core fiber, and fiber from TMP were higher than those from both bisulfite CTMP and neutral sulfite CTMP. Curl indexes of bark fibers were higher than those of core fibers. However curl indexes were not significantly affected by the pulping conditions. Short fiber distributions were higher in core fibers from TMP and CTMP and long fiber distributions were higher in bark fibers. There was no significant difference in fiber distribution of whole and core fibers obtained from TMP and CTMP, Fibers from neutral sulfite CTMP, however, exhibited a little higher long fiber distribution. Distinct difference in anatomical characteristics was found between core and bast fibers of kenaf plant. Parenchyma cell, pith parenchyma cell and vessel were observed in core fibers and bast fiber in bast sections.

• Journal of Periodontal and Implant Science
• /
• v.37 no.4
• /
• pp.681-690
• /
• 2007

Mini implants had been used provisionally for the healing period of implants in the beginning. But it becomes used for the on-going purpose, because it is simple to use, economic and especially suitable for the overdenture. But there is few studies about the stability of mini implants, that is most important factor for the on-going purpose, and particularly the implant parameters affecting the initial stability. The purpose of this study was to evaluate the stress and the strain distribution pattern of immediate-loaded screw type orthodontic mini-implant and the parameters affecting the initial stability of immediate-loaded mini-implant. Two dimensional finite element models were made and contact non-linear finite element analysis was performed. The magnitude and distribution of Von Mises stresses were evaluated. The obtained results were as follows: 1. The stress was concentrated on the thread tip of an implant in the cortical bone. 2. The direction of load is the most important factor for the stress distribution in cortical bone. 3. The diameter of an implant is the most important factor for the stress distribution in the trabecular bone. In conclusion, if the horizontal load vector is successfully controlled, mini-implants, which diameter is under 3mm, can be used for the on-going purpose.