• Korean Chemical Engineering Research
• /
• v.56 no.5
• /
• pp.655-662
• /
• 2018

To respond effectively to climate change following the launch of the new climate system, the government is seeking to expand the use of distributed power resources. Among them, the district heating system centered on Combined Heat and Power (CHP) is accepted as the most realistic alternative. On the other hand, the government recently announced the change of energy paradigm focusing on eco-friendly power generation from the base power generation through $8^{th}$ Basic Plan for Long-term Electricity Supply and Demand(BPE). In this study, we analyzed the quantitative effects of profit and loss on the CHP operating business by changing patterns of the heat production, caused by the change of energy paradigm. To do this, the power market long-term simulation was carried out according to the $7^{th}$ and $8^{th}$ BPE respectively, using the commercialized power market integrated analysis program. In addition, the CHP operating model is organized to calculate the power and heat production level for each CHP operation mode by utilizing the operating performance of 830MW class CHP in Seoul metropolitan area. Based on this, the operation optimization is performed for realizing the maximum operating profit and loss during the life-cycle of CHP through the commercialized integrated energy optimization program. As a result, it can be seen that the change of the energy paradigm of the government increased the level of the ordered power supply by Korean Power Exchange(KPX), decreased the cost of the heat production, and increased the operating contribution margin by 90.9 billion won for the 30 years.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.413-420
• /
• 2013

The design rule depending on total transmission length is induced in the optical links with residual dispersion per span (RDPS) of the random distribution, which is adopted for implementing the flexible systems of wavelength division multiplexing (WDM) transmission with dispersion management (DM) and optical phase conjugation. DM parameters used for the analysis of the design rule are the effective net residual dispersion (NRD) and the effective launch power. It is confirmed that the flexible optical network configuration with the total transmission length lower than 1,000 km is possible, because the system performance difference between the randomly distribution and the uniform distribution of RDPS is small. And, in the optical links with the randomly distributed RDPS, the wide NRD can be applied for transmitting WDM channels of the relatively wide launch power.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.57-68
• /
• 2016

In this study, we present the modern hybrid system based power generation for electric vehicle applications. We describe the hybrid structure of modified current source based DC - DC converters used to extract the maximum power from Photovoltaic (PV) and Fuel Cell system. Due to reduced dc-link capacitor requirement and higher reliability, the current source inverters (CSI) better compared to the voltage source based inverter. The novel control strategy includes Distributed Maximum Power Point Tracking (DMPPT) for photovoltaic (PV) and fuel cell power generation system. The proposed DC - DC converters have been analyzed in both buck and boost mode of operation under duty cycle 0.5>d, 0.5<d<1 and 0.5<d for capable electric vehicle applications. The proposed topology benefits include one common DC-AC inverter that interposes the generated power to supply the charge for the sharing of load in a system of hybrid supply with photovoltaic panels and fuel cell PEM. An improved control of Direct Torque and Flux Control (DTFC) based induction motor fed by current source converters for electric vehicle.In order to achieve better performance in terms of speed, power and miles per gallon for the expert, to accepting high regenerative braking current as well as persistent high dynamics driving performance is required. A simulation model for the hybrid power generation system based electric vehicle has been developed by using MATLAB/Simulink. The Direct Torque and Flux Control (DTFC) is planned using Xilinx ISE software tool in addition to a Modelsim 6.3 software tool that is used for simulation purposes. The FPGA based pulse generation is used to control the induction motor for electric vehicle applications. FPGA has been implemented, in order to verify the minimal error between the simulation results of MATLAB/Simulink and experimental results.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.229-236
• /
• 2017

An efficient frequent pattern algorithm is essential for mining association rules as well as many other mining tasks for convergence with its application spread over a very broad spectrum. Models for mining pattern have been proposed using a FP-tree for storing compressed information about frequent patterns. In this paper, we propose a centroid frequent pattern growth algorithm which we called "CAWFP-Growth" that enhances he FP-Growth algorithm by making the center of weights and frequencies for the itemsets. Because the conventional constraint of maximum weighted support is not necessary to maintain the downward closure property, it is more likely to reduce the search time and the information loss of the frequent patterns. The experimental results show that the proposed algorithm achieves better performance than other algorithms without scarifying the accuracy and increasing the processing time via the centroid of the items. The MapReduce framework model is provided to handle large amounts of data via a pseudo-distributed computing environment. In addition, the modeling of the proposed algorithm is required in the fully distributed mode.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.258-265
• /
• 1995

Regeneration process of edaphic pine(Pinus densiflora) climax forest in Bulyung-gyegog, Uljin-gun, Kyungsangbuk-do, was studied. The height of dominant trees in the stands are 12 15m. Upper layers are highly dominated by pine trees and are randomly distributed. Pine trees in lower layer grow in a patch type. In the upper layer, the age distribution is likely one model type with mode of 60 and 80 years. In the horizontal distribution of these trees, some of the even-aged cluster constituted of several tree were found. For the first 25 years, the stem diameter increment rates in upper layer are higher than those in the middle layer. It could be concluded that after the forest canopy had been broken out, the seedlings established densely in a patch in the gap with the decreasing density and some of them, distributed in random, would constitute the canopy.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.181-190
• /
• 2004

The docking and in silico ligand screening procedures can select small sets of lead -like candidates from large libraries of either commercially or synthetically available compounds; however, the vast number of such molecules make the potential size of this task enormous. To accelerate the discovery of drugs to inhibit several targets, we have exploited massively distributed computing to screen compound libraries virtually. The Korea@HOME project was launched in Feb. 2002, and one year later, more than 1200 PC's have been recruited. This has created a 31 -gigaflop machine that has already provided more than 1400 hours of CPU time. It has all owed databases of millions of compounds to be screened against protein targets in a matter of days. Now, the virtual screening software suitable for distributed environments is developed by BMD. It has been evaluated in terms of the accuracy of the scoring function and the search algorithm for the correct binding mode.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.119-126
• /
• 2011

When ZigBee network supports beacon transmission mechanism, ZigBee devices have the restriction of the transmission range from the coordinator. On the contrary, when it does not support beacon transmission, it is not easy to save the energy through turning into sleep mode. This paper proposes active slot allocation method that allocates a transmission time and does not use the beacon transmission mechanism. It is based on the ZigBee's distributed address assignment mechanism and supports the scalability. This paper explains the active slot structure and the allocation order and describes the operation of ZigBee devices. We verify the proposed mechanism through the simulation and show the performance evaluation. It can be useful on the industrial automation and the environmental surveillance.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.113-119
• /
• 1994

We fabricated and characterized RWG-DFB-LDs emitting at $1.3\mu\textrm{m}$ wavelength. For fabrication of the laser diode, inteference fringe of optical beams was used for grating formation and epi layers were grown by LPE. The fablicated RWG-DFB-LD operated in a single longitudinal mode with more than 30 dB SMSR at 1296.5 nm emitting wavelength and its threshold current was 67 mA. Coupling coefficient (K) was estimated as $40cm^{-1}$ by means of stop-band measurement. Finally, we show that the RWG-DFB-LD fabricated in this experiment can be applicable as light source of 2.5 Gbps optical communication system from the fact that the small signal response of the RWG-DFB-LD rated up to 1.99 GHz at pre-bias level of $1.2 I_{th}$..

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.4
• /
• pp.513-525
• /
• 2019

In Seoul, the subway system has been in use since 1974 and is the most frequently used travel mode accounting for approximately 40% of passenger journeys in 2015. As such the subway system is widely adopted by people and therefore, can have great impacts on their everyday life. However, it is easily noted that transit resources are not distributed spatially uniform, in other words, not all parts of the city gain the same benefits from their networks. This study aims to examine the inequity of spatial distribution of subway networks based on accessibility. Accessibility of subway networks are calculated based on the time-distance between stations and then equity is measured using the Gini index. Resulted map of subway accessibility shows that the benefits are not evenly distributed in Seoul with a pattern of highly accessible core - less accessible periphery areas. Also the subway accessibility network has fairer distribution against the employees' distribution rather than the distribution of general population or possibly transit dependent groups.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.1019-1022
• /
• 2016

In this paper, a 2~16 GHz GaN wideband power amplifier MMIC s designed and fabricated using the nonuniform power amplifier design technique that utilizes drain shunt capacitors to simultaneously provide each transistor with the optimum load impedance and phase balance between input and output transmission lines. The power amplifier MMIC chip that is fabricated using the $0.25{\mu}m$ GaN HEMT foundry process of Win Semiconductors occupies an area of $3.9mm{\times}3.1mm$ and shows a linear gain of larger than 12 dB and an input return loss of greater than 10 dB. Under a continuous-wave mode, it has a saturated output power of 36.2~38.5 dBm and a power-added efficiency of about 8~16 % in 2 to 16 GHz.