• 동력기계공학회지
• /
• 제8권1호
• /
• pp.62-68
• /
• 2004

This paper describes a fault tolerant control in distributed PLC(Programmable Logic Controller) system to ensure reliability of controllers which have some faults simultaneously. First, the behavior of PLC is modeled as discrete expressions using Galois field. Then, we design the control laws for additional spare controllers to generate parity code with two dimensions. Finally, the algorithm for estimating normal output instead of abnormal output from the controllers with fault is suggested. Comparing to the traditional duplication method, the suggested method can reduce the number of spare controllers significantly to ensure control reliability. This method will be applied to an automatic system in order to increase reliability. Also, it can improve cost performance of the system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.65-73
• /
• 2010

In an automated industry PLC plays a central role to control the manufacturing system. Therefore, fault free operation of PLC controlled manufacturing system is essential in order to maximize a firm's productivity. On the contrary, distributed nature of manufacturing system and growing complexity of the PLC programs presented a challenging task of designing a rapid fault finding system for an uninterrupted process operation. Hence, designing an intelligent monitoring, and diagnosis system is needed for smooth functioning of the operation process. In this paper, we propose a method to continuously acquire a stream of PLC signal data from the normal operational PLC-based manufacturing system and to generate diagnosis model from the observed PLC signal data. Consequently, the generated diagnosis model is used for distinguish the possible abnormalities of manufacturing system. To verify the proposed method, we provided a suitable case study of an assembly line.

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.447-454
• /
• 2009

This paper is a technical review of the research and development results of the Korea Nuclear Instrumentation and Control System (KNICS) project and Nu-Tech 2012 program. In these projects man-machine interface system architecture, two digital platforms, and several control and protection systems were developed. One platform is a Programmable Logic Controller (PLC) for a digital safety system and another platform is a Distributed Control System (DCS) for a non-safety control system. With the safety-grade platform PLC, a reactor protection system, an engineered safety feature-component control system, and reactor core protection system were developed. A power control system was developed based on the DCS. A logic alarm cause tracking system was developed as a man-machine interface for APR1400. Also, Integrated Performance Validation Facility (IPVF) was developed for the evaluation of the function and performance of developed I&C systems. The safety-grade platform PLC and the digital safety system obtained approval for the topical report from the Korean regulatory body in February of 2009. A utility and vendor company will determine the suitability of the KNICS and Nu- Tech 2012 products to apply them to the planned nuclear power plants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2197-2199
• /
• 2003

Most of distributed PLC system is secured reliability of the system by fully duplicated controller. But it costs too much. In this paper, we proposed fault tolerant control using minimum spare controllers. First, the system is modeled using Galois field. Next, we designed additional spare controllers using the parity code of two dimensions. Finally, the algorithm for producing estimated output in remote I/O when the fault occurs was suggested. This method will be applied to an automatic system in order to increase reliability and improve cost performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.575-579
• /
• 2005

In this paper, the development of an IMM(Injection Molding Machine) controller is discussed. Presently, the Mold Close and Open Control Method of a toggle-type IMM is open-loop control. Through the development, a PC based control system was built instead of an existing controller and a closed-loop control replaced the previous control method by using PC based PLC. To control the nonlinear system of toggle type clamping unit, a fuzzy PI control algorithm was selected and it was programmed by an IL(Instruction List) and a LD(Ladder Diagram) on a PC based PLC. The application of fuzzy algorithm as the control method was also considered to change a control object like a mold replacement or an additional apparatus. For the development of an IMM controller, PC based PLC of PCI card type, distributed I/O modules with CANopen and Industrial PC and HMI (Human Machine Interface) software were used.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2257-2259
• /
• 2004

Water Treatment Operation System is applied in most water treatment plants with DCS(Distributed Control System) or PLC(Programmable Logic Controller) system. But it has a lot of problems in viewpoint of cost and expansibilities. Therefore, we rose demand about a system that it was easier, convenient and a few costs. So, It was appeared at a Fieldbus as an alternative about this. It is used in ail industrial fields, but because of the economic reality that we can't removes the existing system, and cannot introduce new technology. Because it is actual to be hard to find an actual implementation reward and way of domestic fieldbus technology, we cannot be acknowledged with reliability in the industrial spot. Therefore, We is going to look into a fieldbus application reward in this paper. That is, We recognize structure and a kind of a fieldbus in a Chapter 2. And we is going to look into difference between a PLC method and fieldbus methods in a Chapter 3. Also, We are going to compare the system that used PLC with the system that used fieldbus (LonWorks). And the objects are JinAn and Wonju where a field bus was applied to.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.113-117
• /
• 2003

In the industrial field nowadays the information that needs to be handled arc increasing and requires faster speed in contrast with PLC(Programmable Logic Controller) or DCS(Distributed Control System) based control systems these days. The work environment these days are mostly based on PC, so the control systems are wanted in PC. At Fieldbus used automated systems performing distributed process control by PC performs and combines into one system in order to maximize the increase of productivity, lower the expense, planning constructing and maintaining the reliance of automation. These latest automation systems unites process, makes distributed control process able, and can control and supervise at remote PC.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.307-311
• /
• 1992

종래의 DNC(Direct Numerical Control)에서 가공 Cell의 효율을 높이기 위한 분산 제어 DNC(Distributed Numerical Control)시스템 운용을 위해서는, 운용에 필요한 소프트웨어 외에 공작기계 및 주변기계에 대한 실시간 감시/제어 기능을 가져야 한다. 이를 위해 당 연구실에서는 경제성 및 확장성을 고려 범용 PLC (Programable Logic Controller)와 각 공작기계 및 주변기기를 연결하고, PC(Personal Computer)와 다자간 및 고속 통신이 가능한 전용 통신회선을 이용한 경제성 있는 실시간 가공 Cell 감시/제어시스템 RT-COMOS(Real Time Machine Cell Control and Monitoring System)를 개발했다. 본 논문에서는 이에 대한 연구결과를 소개한다.

• 실천공학교육논문지
• /
• 제9권1호
• /
• pp.49-56
• /
• 2017

최근 Industry 4.0으로 인해 제조업에 대한 생산성 향상과 고객만족을 위한 스마트팩토리 관심이 매우 높고 정부 지원에 따른 구축도 활발하다. 특히, 효율적인 생산 시스템을 구축하기 위한 데이터 통합과 이를 위한 필드버스 통신기술은 필수적이다. 필드버스는 특정 밴더 시스템에 구속받지 않는 개방형 제어시스템으로서 타사 제품과의 호환성, 데이터 전송의 정확성, 원격진단 등의 다양한 이점을 가지고 있다. 그러나, 필드버스를 학습하기 위한 교육 장비와 실습을 위한 교육과정 및 예제가 전무하여 산업현장에서 스마트팩토리 구축을 위해 필요로 하는 실무 능력 향상에 많은 제한점이 있다. 따라서 본 연구는 국내 산업현장에 적합한 PLC와 통신기술을 선정한 선행연구 결과를 바탕으로 실무적인 필드버스 교육을 위한 PLC기반의 필드버스 교육 장비와 교육과정을 개발하고 Ethernet IP, Profibus DP, Modbus, CC-Link, Device Net의 다양한 필드버스를 구현하였다. 또한, Ethernet IP를 통한 데이터 수집과 모니터링으로 분산된 필드기기의 제어와 원격진단이 가능함을 확인하였다.