• Smart Media Journal
• /
• v.5 no.1
• /
• pp.55-60
• /
• 2016

Mobility of the sensor networks proposed a new way to the efficient design of sensor networks and improvement of network system performance. Mobility results in a number of functional changes in the MAC protocol and routing protocol. Especially, the mobility of the nodes may occur the increase of the overhead of transmission or disconnection of the link. Therefore, the study of the energy efficient transmission is very important in mobile sensor networks. This paper proposed adaptive transmission mechanism on the distance-based power control. The proposed mechanism was analyzed better than conventional method in the average energy consumption and network life by simulation results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.6
• /
• pp.1357-1378
• /
• 2013

Energy constraint of wireless sensor networks makes energy saving and prolonging the network lifetime become the most important goals of routing protocols. In this paper, we propose an Energy Efficient Chain-based Routing Protocol (EECRP) for wireless sensor networks to minimize energy consumption and transmission delay. EECRP organizes sensor nodes into a set of horizontal chains and a vertical chain. Chain heads are elected based on the residual energy of nodes and distance from the header of upper level. In each horizontal chain, sensor nodes transmit their data to their own chain head based on chain routing mechanism. EECRP also adopts a chain-based data transmission mechanism for sending data packets from the chain heads to the base station. The simulation results show that EECRP outperforms LEACH, PEGASIS and ECCP in terms of network lifetime, energy consumption, number of data messages received at the base station, transmission delay and especially energy${\times}$delay metric.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1144-1153
• /
• 2015

The resonant mechanism of reradiation interference (RRI) over 1.7MHz from power transmission lines cannot be obtained from IEEE standards, which are based on researches of field intensity. Hence, the resonance is ignored in National Standards of protecting distance between UHV power lines and radio stations in China, which would result in an excessive redundancy of protecting distance. Therefore, based on the generalized resonance theory, we proposed the idea of applying model-based parameter estimation (MBPE) to estimate the generalized resonance frequency of electrically large scattering objects. We also deduced equation expressions of the generalized resonance frequency and its quality factor Q in a lossy open electromagnetic system, i.e. an antenna-transmission line system in this paper. Taking the frequency band studied by IEEE and the frequency band over 1.7 MHz as object, we established three models of the RRI from transmission lines, namely the simplified line model, the tower line model considering cross arms and the line-surface mixed model. With the models, we calculated the scattering field of sampling points with equal intervals using method of moments, and then inferred expressions of Padé rational function. After calculating the zero-pole points of the Padé rational function, we eventually got the estimation of the RRI’s generalized resonant frequency. Our case studies indicate that the proposed estimation method is effective for predicting the generalized resonant frequency of RRI in medium frequency (MF, 0.3~3 MHz) band over 1.7 MHz, which expands the frequency band studied by IEEE.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2658-2681
• /
• 2023

In edge computing scenarios, IoT end devices play a crucial role in relaying and forwarding data to significantly improve IoT network performance. However, traditional routing mechanisms are not applicable to this scenario due to differences in network size and environment. Therefore, it becomes crucial to establish an effective and reliable data transmission path to ensure secure communication between devices. In this paper, we propose a trusted path selection strategy that comprehensively considers multiple attributes, such as link stability and edge cooperation, and selects a stable and secure data transmission path based on the link life cycle, energy level, trust level, and authentication status. In addition, we propose the Stability-based On-demand Multipath Distance Vector (STAOMDV) protocol based on the Ad hoc AOMDV protocol. The STAOMDV protocol implements the collection and updating of link stability attributes during the route discovery and maintenance process. By integrating the STAOMDV protocol with the proposed path selection strategy, a dependable and efficient routing mechanism is established for IoT networks in edge computing scenarios. Simulation results validate that the proposed STAOMDV model achieves a balance in network energy consumption and extends the overall network lifespan.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.195-199
• /
• 2003

BEE 802.11 Wireless LAN protocol uses fixed transmission power. It does not consider a power control mechanism based on the distance between the transmitter and the receiver in order to improve overall channel utilization. In home environment, where stations generally lie around an AP, the AP is subject to use transmission power more than it needs. And wireless LAN stations may require different minimal desired received power. If there are many adjacent BSSs in densely populated WLAN area, they might cause RF interference to one another. In this paper we focus on the improvement of aggregate utilization by mitigating RF interference among BSSs. We show that RF interference by APs can be reduced by controlling transmission power using Link Margin information. The reduced interference will then lead to the increased aggregate throughput which is efficient resource utilization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1077-1088
• /
• 2013

As broadcasting is the process that a node sends a packet to all nodes in the network. it is basic process used for discovering of a routes to a node and disseminating of control information message in Mobile Ad hoc NETwork (MANET). In this paper, we propose dynamically adjusted probabilistic mechanism based on distance ratio and node density for broadcasting in MANETs. The distance ratio can be calculated as the ratio of the radio strength length to the distance from sender of a node, and node density can be get from 1-hop nodes of neighbours. A mobile node receiving broadcast packets determines the probability of rebroadcasting considering distance ratio and node density of itself. Rebroadcast probability will be set as low value to a node which is located in nearby area of sender and has high 1-hop node density, So it reduces packets transmission caused by the early die-out of rebroadcast packets. Compared with the simple flooding and fixed probabilistic flooding by simulation, our approach shows better performances results. Proposed algorithm can reduce the rebroadcast packet delivery more than 30% without scanting reachability, where as it shows up to 96% reachability compared with flooding.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.75-84
• /
• 2010

As broadcasting in Mobile Ad hoc NETwork (MANET) is the process that a node sends a packet to all other nodes in the network. it is used for routing protocols such as Ad hoc On demand Distance Vector (AODV) to disseminate control information for establishing the routes. In this paper, we propose Probabilistic Broadcasting mechanism based on Distance Ratio between sender and receive node in MANETs. The proposed approach is based on the combination of probability and distance based approach. A mobile node receiving broadcast packets determines the probability of rebroadcasting considering distance ratio from sender. The distance ratio of a node is calculated by the distance from sender and the length of radio field strength. As a node with high distance ratio is located far away from sender, rebroadcast probability is set to high value. On contrary, the low rebroadcast probability is set for a node with low distance ratio which is close to sender. So it reduces packets transmission caused by the early die-out of rebroadcast packets. Compared with the simple flooding and fixed probabilistic flooding by simulation, our approach shows better performances results. Proposed algorithm can reduce the rebroadcast packet delivery more than 30% without scanting reachability, where as it shows up to 96% reachability compared with flooding.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.45-50
• /
• 2008

Mobile ad hoc networks (MANETs) allow mobile nodes to communicate among themselves via wireless multiple hops without the help of the wired infrastructure. Therefore, in the MANET, a route setup mechanism that makes nodes not within each other's transmission range communicate is required and, for this, the Ad-hoc On-demand Distance Vector (AODV) was proposed as one of the reactive routing protocols well suited for the characteristics of the MANET. AODV uses the hop count as the routing metric and, as a result, a node selects the farthest neighbor node as its next hop on a route, which results in a problem of deteriorating the overall network throughput because of selecting a relatively low data rate route. In this paper, we propose an efficient reactive routing protocol based on the multi-rate aware MAC. Through the simulations, we analyze the performance of our proposed mechanism and, from the simulation results, we show that our proposed mechanism outperforms the existing mechanism.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.5
• /
• pp.21-29
• /
• 1992

This paper proposes a new MAC propocol for high-speed MAN. The proposed protocol is based on the P$_1$-persistent tranmission scheme and each node calculates the transmission probability periodically by using delay information(DI). A window mechanism for the calculation of message delay in each node is proposed to improve the adaptability of the proposed protocol to traffic changes. The capactiy of the proposed protocol is analyzed. The simulation results show that the proposed protocol gives fair message delay under heavy load conditions and, when the transmission speed or distance is increased, the message delay variation of the proposed protocol is less than that of IEEE 802.6 DQDB.