• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.31-33
• /
• 2000

This paper discusses the operational characteristic analysis of distance relay depending on the power system parameters in transmission line including FACTS devices. Distance relay requires protective coordination because the FACTS devices change power system parameters to increase power transmission capacity. In this paper, the dynamic operational characteristics of distance relay are analyed for the effect of fault resistance and operation mode of FACTS devices according to the installed points of these devices.

• 디지털융복합연구
• /
• 제19권1호
• /
• pp.11-22
• /
• 2021

코로나19 확산으로 초·중·고등학교에서 비대면 원격수업이 시행되고 있으나 가정의 ICTs 환경이 어떻게 갖추어져 있는지에 대한 실증데이터를 분석한 연구는 부족한 상황이다. 가정의 ICTs 환경이 원격수업에 적합한지 알아보기 위해 한국미디어패널조사 데이터를 사용하여 2012년과 2019년 사이 스마트기기 보유량의 변화와 가구 특성에 따른 스마트기기 보유량 차이를 살펴보았다. 본 연구결과에 따르면 2012년에 비해 2019년에는 데스크톱 PC 보유량은 줄어들었으나 노트북 PC, 태블릿 PC, 스마트폰의 보유량이 증가하여 전체적으로는 대부분의 가정에서 원격수업 환경이 갖추어진 것으로 볼 수 있다. 그러나 스마트기기에서 스마트폰을 제외할 경우, 가구소득 500만원 미만 가정에서는 자녀수 별로 원격수업에 필요한 기기를 갖추지 못한 비율이 약 30%로 나타나 가구소득에 따라 원격수업 여건이 다름을 보여준다. 본 연구는 가정의 ICTs 환경을 분석하고 소득집단에 따라 보유 기기 유형의 차이가 있음을 확인함으로써 원격수업으로 인한 불평등을 방지하기 위한 개입 지점을 제시한다는 점에서 의의가 있다.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.40-46
• /
• 2010

To protect press operator from the after-reach hazard, current Ministry of Labor Notification(MOLN) requires the use of a formula for calculating the safe distance away from the point of operation for locating press protective devices, Two Hand Control Devices(THCD) and Active Opto-Electronic Protective Devices(AOPD), on a power press. This formula is based on a same hand speed constant of 160cm/s. While EN standards use different hand speed constant for THCD and AOPD respectively. The objective of this study is to compare two guidelines on the hand speed constant published by MOLN and EN 692, also to propose a proper hand speed constant and validate it experimentally. As a experimental result, it could be known that hand speed constant of Ministry of Labor Notification should be improved as that of EN standards.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1006-1008
• /
• 2003

Position controls are very important in semiconductor manufacturing devices, machine tools precision measuring instruments, etc. to measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• 대한정형도수물리치료학회지
• /
• 제18권2호
• /
• pp.95-102
• /
• 2012

Background: The purpose of this study was to find out influence of using portable mobile devices in human body. Method: The subjects were consisted of the normal persons (19 males and 20 females). These subjects were consisted of three groups according to test time. The A group (12 persons - 6 males, 6 females) tests 5 minutes, the B group (14 persons - 7 males, 7 females) tests 10 minutes, and the C group (13 persons - 6 males, 7 females) tests 15 minutes. Before test, sight, quickness and balance were measured, after test revision, quickness, balance were measured and checked pain scale. Results: The results were as follows. 1. Sight, quickness and balance were decreased and pains were increased after using portable mobile devices than before using these. 2. According to duration of using the portable mobile devices, sight, quickness and balance was not a statistically significant difference, the entire upper body pain was a statistically significant difference. When viewed as part of the pain, shoulder, lower back, and wrist pain were a statistically significant difference, but the neck and elbow were not a statistically significant difference. 3. The influence of vision according to distance of using Portable mobile devices was no statistically significant difference. In addition, less than 20cm distance using equipment group ("Ga") and the group ("Na") which exceeded 20cm in between the sight were not statistically significant difference, Influence of pain according to distance of using Portable mobile devices we-re no statistically significant differences. Conclusion: Using portable mobile devices affect human body on the elements of the biomechanics.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.22-27
• /
• 2003

The roller machines installed in the industrial field are operated under hazardous conditions due to no safety devices available, human error during operation, defective safety devices, and inadequate regulation even in case that safety devices are provided. Up to now, most roller machines installed in domestic field are provides with band breaking system as a safety device. In this study, the emergency stop distance is measured within the limit of domestic regulation but violates a foreign regulation(EN1417). Consequently, it is concluded that the roller machines with a band breaking system have high possibility of death or serious injury of the operator and the system should be improved with the introduction of additional safety devices. This thesis suggests the safety measures suitable for the roller machines with different drive systems based on the experiment results. The use of the newly developed safety system has been tested on many cases.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.79-83
• /
• 2016

This research was analyzed thermal characteristics that was appointed disadvantage when smart LED driver ICs was packaged and we applied extracted thermal characteristics for optimal layout design. We confirmed reliability of smart LED driver ICs package without additional heat sink. If the package is not heat sink, we are possible to minimize package. For extracting thermal loss due to overshoot current, we increased driver current by two and three times. As a result of experiment, we obtained 22 mW and 49.5 mW thermal loss. And we obtained optimal data of 350 mA driver current. It is important to distance between power MOSFET and driver ICs. If thhe distance was increased, the temperature of package was decreased. And so we obtained optimal data of 3.7 mm distance between power MOSFET and driver ICs. Finally, we fabricated real package and we analyzed the electrical characteristics. We obtained constant 35 V output voltage and 80% efficiency.

• 산업공학
• /
• 제20권4호
• /
• pp.539-546
• /
• 2007

This study has been conducted on touch screen interface design for mobile devices. It was intended to measure user’s satisfaction on one-handed thumb input mobile devices. Recent studies proposed the optimal touch button size, but it is inappropriate for mobile devices. Therefore, this study was focused on four touch key factors-width, height, the horizontal and vertical distance between touch keys-as independent variables. The ANOVA results showed that the user satisfaction of four touch key factors was significantly affected by the thumb input. It also apparent that the interactions between four factors were significant. As a result, the horizontal and vertical distance as well as the width and height affected the satisfaction of users. In addition, this study suggested satisfaction models which represent the top 30%, 50%, 70% of user satisfaction measurement. The results of this study could be used to design touch keys that are able to enhance the usability on touch screen based mobile devices.

• 한국융합학회논문지
• /
• 제8권8호
• /
• pp.27-32
• /
• 2017

복수 개의 웨어러블 디바이스는 휴대성 때문에 유선으로 통신하는 것이 적합하지 않다. 복수 개의 웨어러블 디바이스가 서로 통신 할 때 우수한 통신 품질과 그룹 활동 특징 때문에 무선통신 방법을 이용한다. 본 논문에서 복수 개의 웨어러블 디바이스들의 그룹형 디스플레이를 위한 그룹결정 알고리즘을 제안하였다. 이것은 무선통신 환경에서 여러 개의 웨어러블 디바이스들이 단체동작 디스플레이를 할 때 거리측정을 통하여 그룹멤버로 인지하는 그룹결정 알고리즘을 의미한다. 실험결과 복수 개의 웨어러블 디바이스들의 그룹 디스플레이가 단일 웨어러블 디스플레이의 한계를 극복하였음을 보여주었다.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.512-518
• /
• 2003

반도체 장비나 산업용 정밀 머신 툴 등에서 고정밀 위치제어는 매우 중요하다. 고정밀 위치제어장치와 같은 미소단위로 이동하는 물체의 이동 거리나 위치를 측정하는 다양한 기기나 반도체 제조장치 등에서 고정밀도로 위치제어를 행하는 기기들의 위치 변위 검출에 대한 정확도는 제어기의 성능을 좌우하는 중요한 요소 중의 하나가 된다 본문에서는 기존의 저가형 광학식 엔코더의 전기적 회로 부분의 변형으로 디지털 신호 및 회절격자의 회절량에 대한 아날로그 신호를 기초로 하여 마이크로프로세스의 협력으로 고정도의 위치를 얻을 수 있는 새로운 방식의 위치검출기법을 제안하였다. 또한 실험을 통하여 그 타당성을 검증하였다.