• 제목/요약/키워드: Distance Measurement Method

검색결과 943건 처리시간 0.028초

도로와 교차하는 제주천연동굴(재암천굴)의 거동특성 분석을 위한 수치해석적 연구 (Numerical Analysis Study for Behavioral Characteristics Analysis of Jeju Natural Caves (Jaeamcheon Lava Tube) That Intersect with Roads)

  • 이종현;진현식;안준상;백용
    • 지질공학
    • /
    • 제31권3호
    • /
    • pp.367-380
    • /
    • 2021
  • 본 연구는 제주도 내 운영중인 도로하부에 천연동굴이 존재하는 경우, 3차원 수치해석적 방법을 통해 안정성을 평가하였다. 도로 하부를 관통하는 제주천연동굴의 기하학적 및 지반공학적 특성을 확인하기 위해 기존 지반조사보고서를 수집한 후, 그 특성을 검토하였다. 이를 토대로 차량진동하중이 제주천연동굴에 미치는 영향을 평가하기 위하여 불연속면을 고려한 3차원 수치해석을 실시하였다. 연구결과를 토대로, 차량속도, 토피고에 따른 도로와 제주천연동굴의 안정성을 평가하고, 대책을 제안하였다. 도로 하부를 관통하는 제주천연동굴의 장기안정성 확보를 위하여, 토피고에 따라 장기계측관리, 보강대책, 응급대책 등 체계적인 관리가 필요할 것으로 평가되었다.

은 나노입자 프린팅 기반의 재활치료용 신축성 관절센서 개발 (Development of Stretchable Joint Motion Sensor for Rehabilitation based on Silver Nanoparticle Direct Printing)

  • Chae, Woen-Sik;Jung, Jae-Hu
    • 한국운동역학회지
    • /
    • 제31권3호
    • /
    • pp.183-188
    • /
    • 2021
  • Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

Evaluations for Fraud in L/C Transactions, and Counter-Measures

  • Lee, Jae-Sung
    • Journal of Korea Trade
    • /
    • 제24권7호
    • /
    • pp.73-92
    • /
    • 2020
  • Purpose - The letter of credit has been playing a major role to diminish overall risks which exist among concerned parties even though there are differences such as language, culture, law, and distance. This paper reviews essence of the letter of credit and its transaction principles, as well as overall practical questions based on the L/C transaction principle. It also investigates the risk of fraud occurrences in L/C transactions and the importance of fraud prevention and preventive measures in international L/C transactions, including the Fraud Rule, which is a major topic to consider in business transactions. Design/methodology - It is considered that an importing country's concerned parties and an exporting country's concerned parties face different situations. This study employs the existing framework to identify liability, responsibility, and obligation for all concerned parties across countries. Using a quite direct measurement of principles in the letter of credit, such as principle of independence, principle of abstraction, and principle of strictness and coincidence, we studied these differences. Findings - Our main findings can be summarized as follow. The paper enhances the efficiency of the L/C payment method to provide fraud generated from L/C transactions, presentation of a theoretical framework about fraud and fraud prevention, which international trading companies should acknowledge in a material way based on fraud risk resulting from taking advantage of L/C transaction principles. Originality/value - Existing studies focus on fraud accidents in L/C transactions by taking bad advantage of the characteristics of the letter of credit without suggesting risks of fraud. This paper attempts to evaluate and provide preventive measures as a solution for fraud and risky international business in a letter of credit transaction. This area of trade studies is underexplored, both empirically and theoretically, although the issue has long been important to Korean and world community foreign trade.

둥근 어깨가 있는 대상자에게 골반 압박 벨트 적용을 동반한 어깨 안정화 운동의 수행이 어깨관절 주위 근육의 근활성도와 통증 및 기능에 미치는 영향 (Effect of Shoulder Stabilization Exercise with Pelvic Compression Belt Application on Muscle Activity, Pain and Function of Muscles around Shoulder Joint in Subjects with Round Shoulders)

  • 김충유;이연섭;김현수
    • 대한통합의학회지
    • /
    • 제10권4호
    • /
    • pp.199-207
    • /
    • 2022
  • Purpose : The purpose of this study is to investigate the effect of shoulder stabilization exercise accompanied by application of a pelvic compression belt on the muscle activity, pain and function of the muscles around the shoulder in subjects with round shoulders. Methods : For the study method, 28 students who were enrolled in K University with a distance of 1 cm or more between the clavicle of the peak and the outer ear path were selected through GPS 400 global postural analysis system measurement. The subjects were randomly assigned to 14 participants in the group wearing a pelvic compression belt and 14 patients in the group not wearing a pelvic compression belt. In all subjects, the muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and the shoulder pain disorder index (SPADI) were measured. The intervention was performed 3 times a week for 4 weeks, and the applied intervention was push-up plus and modified prone cobra exercise. The muscle activities of the middle trapezius, lower trapezius, and serratus anterior muscles and SPADI score were compared using dependent t test before and after intervention. Results : In this study, both groups showed that the muscle activity of the middle trapezius, lower trapezius, and serratus anterior significantly increased after the intervention compared to before the intervention. On the other hand, SPADI showed no significant difference. Conclusion : The results of this study showed that muscle activity in the peri-shoulder joint was increased after push-up plus and modified prone cobra exercise in both groups, regardless of whether pelvic compression was applied or not. Therefore, it was found that shoulder stabilization exercise using the pelvic compression belt also contributed to the enhancement of muscle activity in the joints around the shoulder.

가슴 가동성 제한을 가지고 있는 대상자에게 가슴 가동성 운동이 가슴가동성, 호흡패턴 및 호흡량에 미치는 효과: 사례 시리즈 (Effects of Thorax Mobility Exercise on the Thorax Mobility, Breathing Pattern and Respiratory Capacity in Subject With Restricted Thorax Mobility: A Case Series)

  • 하성민
    • 재활치료과학
    • /
    • 제12권2호
    • /
    • pp.99-107
    • /
    • 2023
  • 목적 : 본 연구는 가슴 가동성 제한을 가지고 있는 대상자에게 가슴 가동성 운동이 가슴 가동성, 호흡 패턴 및 호흡 용량에 미치는 영향을 알아보고자 하였다. 연구방법 : 13명의 가슴 가동성 제한을 가진 남/녀 대상자를 대상으로 가슴 가동성 운동(갈비뼈 가동성 운동)을 시행하여 가슴 가동성, 호흡 패턴 및 호흡량에 어떠한 변화가 있는지를 알아보았다. 가슴 가동성 운동 전/후에 연구 참여 대상자의 가슴 가동성(들숨-날숨 간 가슴 확장 길이 측정), 호흡 패턴 형태(가슴 움직임 수직 이동거리 측정) 및 호흡량(forced vital capacity, forced expiratory volume in 1 second)을 측정하였다. 가슴 가동성, 호흡 패턴 및 호흡 용량을 비교하기 위하여 짝-검정을 사용하였다. 통계적 유의성 검정을 위한 유의수준은 .05였다. 결과 : 가슴 가동성과 호흡 패턴은 통계적으로 유의한 차이가 있지만, 호흡 용량은 유의한 차이가 없었다(p < .05). 결론 : 본 연구의 결과를 토대로 갈비뼈 가동화 기법을 이용한 가슴 가동성 운동은 가슴 가동성 개선과 가슴 올림이 유발되는 비정상적인 호흡 패턴을 정상화시킬 수 있는 방법이라고 여겨진다.

이산화탄소 원격 계측을 위한 광 계수 방식의 라만 라이다 장치 개발 (Development of a Raman Lidar System Using the Photon-counting Method to Measure Carbon Dioxide)

  • 박선호;최인영;윤문상
    • 한국광학회지
    • /
    • 제35권2호
    • /
    • pp.71-80
    • /
    • 2024
  • 이산화탄소 원격 계측을 위한 라만 라이다 장치를 개발하기 위해 라만 라이다 장치의 소형화를 진행하고, 이에 스캐닝 장치를 결합하여 라만 라이다 시스템을 개발하였다. 개발한 시스템의 성능 검증을 위하여 가스 챔버를 약 87 m 거리에 위치시킨 후, 이산화탄소의 농도 변화에 따른 라만 산란 신호를 계측하였다. 그 결과 개발된 라만 라이다 장치를 이용하였을 때 약 0.67-40 vol% 사이의 농도에서 높은 선형성을 나타냄을 확인하였다.

댐퍼가 부착된 사장교의 케이블 장력에 관한연구 (A Study on Tension for Cables of a Cable-stayed Bridge Damper is Attached)

  • 박연수;최선민;양원열;홍혜진;김운형
    • 한국강구조학회 논문집
    • /
    • 제20권5호
    • /
    • pp.609-616
    • /
    • 2008
  • 국가경제력 향상과 함께 바다와 섬에 대한 관심이 높아지면서 육지와 섬, 섬과 섬을 연결하는 해상 장대교량이 많이 건설되고 있다. 장대교량은 현수교, 사장교, 아치교, 트러스교 등으로 대변할 수 있는데 그 중에서도 사장교는 주탑(Pylon)과 케이블(Cable), 보강형(Stiffened Girder)이 조화를 이루면서 외관이 아름다워 매력적인 교량형식의 하나로 최근 많이 계획되고 있다. 장력측정은 케이블에 설치한 가속도 센서로부터 케이블의 고유진동수 변화를 이용하는 간접법인 진동법을 적용하였다. 본 연구에서는 댐퍼 설치 케이블의 유효길이 산정식을 제안하였는데 이는 케이블의 유효길이 변화를 실측치와 해석값을 비교하여 분석한 것으로 기존의 유효길이 산정방법인 댐퍼와 정착단간의 순간격에 의한 것은 최종 케이블 장력값 추정에 있어서 신뢰도가 떨어짐을 확인할 수 있었다. 그러므로 향후 유지관리 단계에서는 본 연구에서 제안한 케이블의 유효길이 산정식을 활용하여 장력을 정확하게 파악하는 것이 케이블의 재긴장 및 교체시기 결정 등에도 합리적인 의사결정 자료로 사용될 수 있을 것이다.

노천시험발파의 진동평가와 개선방안 (A Vibration Evaluation and Improvement Scheme for Open Test Blasting)

  • 김응록
    • 한국산학기술학회논문지
    • /
    • 제18권1호
    • /
    • pp.310-315
    • /
    • 2017
  • 대규모 건설공사 현장에서는 발파공사에 대한 표준발파패턴과 시험발파패턴의 발파진동추정식의 상이에 따른 설계변경의 반영 문제로 시공사, 건설사업관리자, 발주처간의 갈등요인을 해소하기 위한 체계적인 자료의 수집 및 분석 과정을 통하여 효율적인 대책수립이 필요한 실정이다. 발파진동에 의한 인접 구조물에 미치는 영향을 여러 각도로 평가하려는 연구들은 계속 되어 왔으나, 노천발파를 수행하면서 현장계측의 진동파형을 분석하여 인접 건축물의 안전성을 확보하고 현장여건에 적합한 발파공법을 연구한 사례는 미미한 실정이다. 따라서 현장여건에 적합하고 경제적이며 효율적인 발파작업을 수행할 수 있도록 시험발파를 통하여 발파패턴 선정의 개선방안을 제시하는 것이 필요하다. 본 연구에서는 실제 도로확장공사 현장에서 시험발파를 통한 표준발파공법 및 진동규제기준별로 적용되는 이격 거리를 기준으로 노천 발파작업을 수행하여 발파진동 값을 계측하고 이를 통한 발파공법별 진동예측식을 회귀분석 전산프로그램을 이용하여 신뢰수준 95%의 K, n, R등을 산출하였다. 시험발파 대상지역의 발파허용진동기준을 0.3cm/sec로 설정하고 노천발파지침의 발파진동추정식과 시험발파의 발파진동추정식에 따른 이격 거리별 장약량과 발파공법을 비교분석한 결과 사업비가 증가하는 요인을 도출할 수 있었다. 또한, 노천발파 작업 중 인접 구조물에 대한 계측 및 분석을 수행하고 노천발파지점과 가장 인접한 구조물을 선정하여 발파진동 계측 및 평가를 시행하여 노천발파공사를 완료하는 과정에서 나타난 노천발파 설계 시공 지침에서의 시험발파 절차 및 해석방법에 대한 문제점을 분석하여 개선방안을 제시하였다.

통신신호 추적을 위한 모노펄스 및 추적성능 향상 방안 (Enhancement for Performance of Monopulse and Target Tracking for Communication Signal Tracking)

  • 길현주;이영진;김재신;이은석
    • 전자공학회논문지
    • /
    • 제51권5호
    • /
    • pp.35-43
    • /
    • 2014
  • 본 논문에서는 이동하는 항공기의 통신장비와 지상 통신장비 간의 무선통신 링크 유지 및 통신신호 추적을 위하여 모노펄스 시스템과 ${\alpha}{\beta}$ 필터가 결합된 통신신호 추적 시스템의 성능향상 방안을 제시한다. 모노펄스 오차각 추적을 위하여 일반적으로 사용되는 모노펄스 기울기 곡선(Monopulse Ratio Curve)에 의한 추적 방식이 아닌 최소거리 연산방식을 제안하며, 통신 신호의 일시적 단절 상황에서 모노펄스 추적 재연결 확률 및 추적 정확도 향상을 위하여 가변 이득 방식의 ${\alpha}{\beta}$ 필터 알고리즘을 제안한다. 프로토타입 안테나로 측정한 MR Curve를 이용하여 제안된 모노펄스 시스템의 성능향상을 확인할 수 있다. 또한, 통신 단절 및 연결 상황에서 항공기 모의궤적을 이용한 모의실험은 고정 이득 방식의 ${\alpha}{\beta}$ 필터 대비 가변 이득 방식의 ${\alpha}{\beta}$ 필터 알고리즘의 성능향상을 보여준다. 본 논문에서 제시한 방식은 기존 통신신호 추적 시스템의 하드웨어에 대한 변경 없이 알고리즘의 변경만으로 가능하기 때문에 최소비용을 통한 성능향상을 기대할 수 있다.

치과방사선 검사에서 두부(brain)의 흡수선량 평가 (Evaluation the absorbed dose in brain of dental radiography)

  • 전운선;한동균
    • 한국방사선학회논문지
    • /
    • 제5권6호
    • /
    • pp.343-349
    • /
    • 2011
  • 치과 방사선검사에 있어 두부 내의 흡수선량에 관한 평가를 하고자 인체모형팬텀 내부의 뇌하수체와 안구, 상악동, 악하선, 갑상선, 식도에 유리형광소자를 삽입하고 X-선을 조사하였다. 사용된 장치로는 Kodak 2200, Kodak 8000C dental radiographic systems과 computed tomography(Lightspeed VCT)이고 촬영조건은 임상에서 사용하는 인자와 동일하게 설정하였다. 이때 구내 X-선 검사의 경우 흡수선량은 0.02~2.47cGy로 가장 높게 측정된 곳은 상악 대구치 촬영 시 2.47cGy인 갑상선이었고 가장 낮은 곳은 하악 전치부 촬영에서 0.02cGy인 악하선이었다. 그리고 구외 X-선 검사의 경우 흡수선량은 세파로에서 0.36~3.44cGy, 파노라마에서 0.14~12.82cGy, 전산화단층촬영에서 8.17~253.63cGy 가장 높게 측정된 곳은 상악 CT 촬영 시 253.63cGy인 악하선이었고 가장 낮은 곳은 파노라마 촬영에서 0.14cGy인 안구이었다. 구외 X-선 검사가 구내 X-선 검사 보다 많은 흡수선량이 측정되었다. 특히 CT를 이용한 검사에서는 구내 촬영보다 100배 이상 높게 측정되었다. 따라서 구외 X-선 검사에 있어서 가이드라인을 제시하여야 하며 방사선에 의한 흡수선량을 줄이기 위한 노력이 요구된다.