• 열처리공학회지
• /
• 제29권1호
• /
• pp.15-23
• /
• 2016

The effects of austenitizing temperature and cooling rate on precipitation behavior and tensile properties were investigated in an Mn-Mo-Nb-V pressure vessel steel. During austenitizing, it was shown that the austenite coarsening was somewhat suppressed by undissolved NbC. After cooling from austenitizing, the microstructure of all the steels mainly consisted of upper bainite. However, the steel comprised a little lower bainite and martensite in the case of aqua oil quenching from $1000^{\circ}C$, which would be due to increased hardenability by partly dissolved Nb and comparatively large austenite grains. The average size of NbC in austenite at higher temperature was analyzed to be smaller than that at lower temperature because of the more dissolution. It was found that the NbC did not grow much during fast cooling from austenitizing. Meanwhile, the NbC grew much during slow cooling, probably due to wide temperature range of cooling and sufficiently long time for NbC to grow. It was conjectured the V precipitates newly formed and/or grew during cooling from austenitizing and during tempering. On the other hand, the formation of NbC was almost completed before tempering and little more precipitated during tempering. Among the tempered steels, the steel which was fast cooled from $1000^{\circ}C$ showed the highest tensile strength, which seemed to come from the microstructure of fine upper bainite and some low temperature phases as well as the comparatively fine NbC precipitates.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권5호
• /
• pp.1-10
• /
• 2015

FeS, as a natural reduced iron mineral, has been recognized to be a viable reactive material for As(III) sequestration in natural and engineered systems. In this study, FeS-coated sand packed columns were tested to evaluate the As(III) removal capacities under anaerobic conditions at pH 5, 7 and 9. The column obtained As(III) removal capacity was then compared with the capacity result obtained from batch reactors. In the comparison, two different approaches were used. The first approach was used the total As(III) removal capacity which method was proved to be useful for interpreting pH 5 system. The second approach was used to consider sorption non-linearity and proved to be useful for interpreting the pH 9. The results demonstrated that a mechanistic understanding of the different removal processes at different pH conditions is important to interpret the column experimental results. At pH 5, where the precipitation of arsenic sulfide plays the major role in the removal of arsenic, the column shows a greater removal efficiency than the batch system due to the continuous dissolution of sulfide and precipitation of arsenic sulfide. At pH 9, where adsorption mainly governs the arsenic removal, the sorption nonlinearity should be considered in the estimation of the column capacity. This study highlighted the importance of understanding reaction mechanism to predict column performance using batch-obtained experimental results.

• 열처리공학회지
• /
• 제26권1호
• /
• pp.14-20
• /
• 2013

Duplex stainless steel, which is a kind of stainless steel with a mixed microstructure of about equal proportions of austenite and ferrite, is generally known as a unique material with excellent corrosion resistance and high strength. However, toughness, strength, and corrosion resistance of the steel could be reduced due to precipitation of topologically closed packed phases such as sigma phase during cooling. In case of large forged products, they have strong possibility that ${\sigma}$-phase precipitates due to difference of cooling rate between surface and inner of the products. Investigation on sigma phase precipitation behavior of duplex stainless steel with change of cooling rate was carried out in this study. Forged SAF 2205 duplex stainless steel was used as specimens to examine the cooling rate effect. Dissolution behavior of sigma phase was also discussed through resolution test of duplex stainless steel containing lots of sigma phase. Experimental results revealed that impact energy was very sensitive to precipitation of small amount sigma phase. However, sigma phase could be removed by short term resolution treatment and impact resistance of the duplex stainless steel was restored.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.25-34
• /
• 1994

To investigate the effect of austenitizing tempratures on the mechanical properties and corrosion resistance of 0.19%C-13.6%Cr martensitic stainless steel, the changes in martensitic trasformation temperatures, mechanical properties and anodic polarization curve were examined after changing the austenitizing temperatures and tempering temperatures. On increasing heating rate at the same austenitizing temperatures, $A_s$, $A_r$ and $M_s$ increased. And the $M_s$ temperature showed to be decreased with increasing austenitizing temperature. With increasing tempering temperature up to $500^{\circ}C$, strength, hardness and impact value were not changed remarkably, on the other hand the tensile strength and hardness decreased and impact value increased after tempering above $550^{\circ}C$ owing to the $M_{23}C_6$ carbide precipitation. The abrupt decrease in elongation at the tempering temperture of $500^{\circ}C$ proved to the precipitation of $M_7C_3$ carbide. The effect of austenitizing temperature on the mechanical properties of the tempered specimen showed to be decreased in impact value and elongation at the austenitizing temperature of $1150^{\circ}C$. At low tempering temperatures the corrosion resistance of the tempered specimen was not changed obviously with increasing tempering temperature. On the other hand, the resistance decreased above the tempering temperature of $600^{\circ}C$ due to the precipitation of $M_{23}C_6$ carbides. The corrosion resistance showed to be improved with increasing the austenitizing temperature owing to the dissolution of carbides.

• 자원리싸이클링
• /
• 제17권1호
• /
• pp.38-42
• /
• 2008

암모니아 용액중에서 바나듐(V)의 침출 시 바나듐의 용해와 후공정에서 $NH_4VO_3$로 침전 회수를 위한 조건에 관한 기초연구를 수행하였다. 침출공점에서 바나듐의 용해도를 높이기 위해서는 높은 온도가 필요하며 $(NH_4)_2CO_3$ 20g/L와 $NH_4OH$ 2.5M의 혼합 용액에서 반응온도가 $90^{\circ}C$일 때 용액 중 바나듐 농도가 16.8g/L이다. 한편 용해된 바나듐을 침전물 형태로 회수하기 위해서는 $25^{\circ}C$에서 $NH_4Cl$을 20g/L를 첨가하고 72시간 정치했을 때 용액에 잔류 바나듐의 농도를 0.0268g/L까지 낮출 수 있었으며 이 경우 바나듐의 회수율은 99.8%이었다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.437-443
• /
• 2003

A series of alternating and alternating block copolycarbonates containing the constituent groups of polysulfone was synthesized through a multi-step solution condensation method. For the regulation of block length, monodisperse oligomers were prepared by using a large excess of the bisphenols and were subsequently incorporated into the copolymer chains. Separating the unreacted bisphenols from the oligomers by dissolution/precipitation steps took advantage of solubility differences. The structures of the monomers, oligomers, and copolymers were characterized and confirmed by GPC, NMR spectroscopy, mass spectrometry, and elemental analysis. Monodispersity of the oligomers, which is critical for control over the block length in the copolymers, was confirmed by GPC and mass spectrometry. Of the two constituent groups of the polysulfone, the sulfone linkage stiffens the polycarbonate copolymer chain, while the ether linkage softens it.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.383-388
• /
• 1990

Hydraulic properties of CA2-based clinker synthesized by Hydration-Burning Method was studied by calorimetry, analysis of suspension, thermogravimetry, scanning electron microscopy and X-ray diffractometry. Hydraulic properties of the clinker was so activated that heat of hydration of the clinker evolved faster than that of CA synthesized by conventional method. In suspension of W/C=33, dissolution of the clinker began at nearly same time as that of CA, but precipitation of AH3 and rise of [OH-] occurred fairly faster in the suspension of the clinker than that of CA. From the beginning of hydration, AH3 was produced and became a main phase of the hydrate with minor phase of CAH10 and C2AH8, but C3AH6 was not produced at ambient temperature.

• 산업기술연구
• /
• 제21권A호
• /
• pp.351-355
• /
• 2001

This research was carried out to find out the possibility of using Faraday's law in analyzing the electrocoagulation system. Bench-scale reactor equipped with aluminum electrode plates was operated using synthetic wastewater which received sodium chloride for conductivity adjustment. Phosphate was added to the wastewater to induce the precipitation with Al. The amount of aluminum dissolved from the electrodes could be predicted by Faraday's law with a difference less than 5%. This difference was greater at a higher electric current, probably due to the increased solution temperature. However, effect of pH on the dissolution of the aluminum was negligible. The result of this study suggested that the operating condition of electrocoagulation system could be developed using the Faraday's law when the pollutant concentration is given.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.111-114
• /
• 2006

The effects of indigenous bacteria on geochemical behavior of As in As-contaminated sediments (Hwachon mine and Myoungbong mine) after biostimulation with a variety of carbon sources were investigated under anaerobic condition. In Hwachon sediment, As was dramatically extracted from nonsterile sediment with time, reaching the highest concentration of $500{\mu}g/L$. The As leaching was likely caused by microbial dissolution of Fe oxides/oxyhydroxides with which As had been coprecipitated. However, in the case of Myoungbong sediment supplied with glucose, dissolved As decreased with time likely due to production of As sulfide(s) and subsequent precipitation, which resulted from bacterial reduction of $SO_4^{2-}$. The results implied that bacterial in-situ stabilization of As In subsurface has a potential to be practically applied.

• 한국광물학회지
• /
• 제14권1호
• /
• pp.1-11
• /
• 2001

미국 메사추세츠 북중부에 산출되는 데본기 리틀톤층(Littleton Formation)의 남정석-십자석-석류석대에서 채취한 석류석 반상변정의 화학적 누대구조는 여러 번의 성장 단계를 경험했음을 보여준다. 석류석 반상변정들은 비대칭적이고 불규칙적인 Mn, Mg, Ca의 누대구조를 보인다. 조직대 경계부에서 석류석 성분들은 단면선에 따라 그 형태가 다르게 나타나고, $X_{Mn}$ 과 Fe/(Fe+Mg)비의 역전 누대구조는 석류석내의 내부엽리의 발달과 밀접한 관계를 보여준다. 이런 관찰 사항들은 석류석 누대구조가 석류석을 형성/소모시키는 반응뿐만 아니라, 용해작용과 침전작용과 관련된 기존의 미세구조에 의해 변화되었음을 의미한다. 화학적 그리고 조직적 잘림구조의 관계 그리고 저자가 제안한 석류석 성장모델은 석류석 누대구조가 엽리의 발달 동안 전단 응력대에서 일어나는 선택적 용해작용과 압축 운동대에서 발생하는 침전작용에 의해 조절되었음을 지시한다.