• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3190-3192
• /
• 1999

A Novel wide-band wide-tunable current-mode (CM) gamma corrector for HDTV camera applications is proposed. The gamma corrector provides accurate gamma control in a wide range by simple electrical adjustment of weighting amplifiers' gain. It has wide signal bandwidth more than 40MHz sufficient for HDTV video signal processing and is implementable with simple integrated circuit with low power dissipation of 125mW.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.189-195
• /
• 2006

The microstructure, electrical and dielectric properties, and stability against DC accelerated aging stress of the varistors, which are composed of quaternary system $ZnO-Pr_6O_{11}CoO-Cr_2O_3-based$ ceramics, were investigated for different $La_2O_3$ contents. The increase of $La_2O_3$ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0mol%. The highest nonlinearity was obtained from 0.5mol% $La_2O_3$, with the nonlinear coefficient of 81.6 and the leakage current of $0.1{\mu}A$. The varistors doped with 0.5mol% $La_2O_3$ exhibited high stability, in which the variation rates of breakdown voltage, nonlinear coefficient, leakage current, dielectric constant, and dissipation factor were -1.1%, -3.7%, +100%, +1.4%, and +8.2%, respectively, for stressing state of $0.95V_{1mA}/150^{\circ}C/24h$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.105-106
• /
• 2005

The impact ionization MOS (I-MOS) transistor with 50nm channel length is presented by using 2-D device simulator ISE-TCAD. The subthreshold slope cannot be steeper than kT/q since the subthreshold conduction is due to diffusion current. As MOSFETs are scaled down, this problem becomes significant and the subthreshold slope degrades which leads an increase in the off-current and off-state power dissipation. The I-MOS is based on a gated p-i-n structure and the subthreshold conduction is induced by impact ionization. The simulation results show that the subthreshold slope is 11.7 mV/dec and this indicates the I-MOS improves the switching speed and off-state characteristics.

• Coupled systems mechanics
• /
• 제13권1호
• /
• pp.21-41
• /
• 2024

This paper is concerned with the disturbances in a transversely isotropic new modified couple stress homogeneous thermoelastic rotating medium under the combined influence of Hall currents, magnetic fields, and mechanical sources represented by inclined loads. The application of Laplace and Fourier transform techniques are used for the derivation of analytical expressions for various physical quantities. As an application,the bounding surface is subjected to uniformly and linearly distributed force (mechanical force). Present model contains length scale parameters that can capture the size effects. Numerical inversion techniques has been used to provide insights into the system's behavior in the physical domain. The graphical representation of numerical simulated results has been presented to emphasize the impact of rotation and inclined line loads on the system, enhancing our understanding of the studied phenomena. Further research can extend this study to investigate additional complexities and real-world applications.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.819-824
• /
• 2016

The accelerated thermal aging of CSPE (chlorosulfonated polyethylene) was carried out for 33.64 and 67.27 days at 110[$^{\circ}C$], equivalent to 40 and 80 years of aging at 50[$^{\circ}C$], respectively. These samples were referred to as CSPE-0y, CSPE-40y and CSPE-80y, respectively. As the accelerated thermally aged years of the CSPE increase, the insulation resistance[$\Omega$] at 20[Hz], 500[Hz], and 2[KHz], and the percent elongation [%EL] of the CSPE decrease. However, the dissipation factor($tan{\delta}$) at 20[Hz], 500[Hz], and 2[KHz], the apparent density[$g/cm^3$], the glass transition temperature and the melting temperature of the CSPE were increased. The period of time that the voltage has to be applied until electric breakdown of the CSPE-0y is longer than that of the CSPE-40y, and the CSPE-80y, but the dielectric strength of the CSPE-80y is lower than that of the CSPE-0y and the CSPE-40y. The differential temperatures after the AC and DC voltages are applied to CSPE-0y, CSPE-40y and CSPE-80y are 0.026~0.028[$^{\circ}C$], 0.030~0.042[$^{\circ}C$], 0.018~0.045[$^{\circ}C$], respectively. The variations of temperature for the AC voltage are higher than those for the DC voltage when an AC voltage is applied to CSPE-0y, CSPE-40y and CSPE-80y. It is found that the dielectric loss owing to the dissipation factor[$tan{\delta}$] is related to the electric dipole conduction current. It is ascertained that the ionic (electron or hole) leakage current is increased by the separation of the branch chain of CSPE polymer from the main chain of the polyethylene as a result of thermal stress due to accelerated thermal aging as well as by conducting ions such as $Na^+$, $Cl^-$, $Mg^{2+}$, $SO_4^{2-}$, $Ca^{2+}$ and $K^+$ after seawater soaking.

• 전자공학회논문지C
• /
• 제35C권9호
• /
• pp.64-72
• /
• 1998

본 논문에서는 상보형 high swing cascode 전류미러를 이용하여 저전압, 저전력 구동이 가능하고 고주파수 응용이 가능한 전류 적분기를 설계하였다. 간단한 전류미러로 구성된 적분기는 적분기의 비 이상적인 입력, 출력 저항 때문에 출력 전류 오차가 발생하는데 제안된 전류 적분기는 출력 저항이 증가하여 출력 전류의 오차가 감소하였다. 설계된 무손실, 유손실 전류 적분기를 이용한 설계 예로 3차 버터워스 저역통과 필터를 개구리도약형으로 구현하였다. 필터 구현시 무손실 전류 적분기의 위상 추이 때문에 발생하는 차단주파수 부근에서의 크기 특성 왜곡을 predistortion 설계법을 이용하여 감소시켰다. 설계된 전류모드 필터를 0.8㎛ CMOS n-well 공정 파라미터를 이용하여 SPICE 시뮬레이션한 결과 단일 2V 공급 전압에서 차단주파수는 20MHz, 전력소모는 615㎼를 갖는다. 또한 필터의 차단주파수는 DC 바이어스 전류에 의해 동조 할 수 있다.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.40-48
• /
• 2013

본 논문에서는 0.18um CMOS(1P6M) 공정을 이용하여 무인차량용 단거리 라이다 시스템을 위한 멀티채널 트랜스임피던스 증폭기(TIA) 어레이 회로를 구현하였다. 트랜스임피던스 증폭기 어레이 구조는 전압모드 $4{\times}4$ 채널 Inverter TIA 어레이와 전류모드 $4{\times}4$ 채널 Common-Gate(CG) TIA 어레이 두 가지를 설계했으며, 전체적으로 $4{\times}8$의 32-채널을 갖도록 설계하였다. 먼저, Inverter TIA는 피드백 저항을 가진 Inverter 입력구조와 CML 출력버퍼단으로 구성되어 있으며, 저잡음 및 저전력 특성뿐 아니라, virtual ground를 갖도록 설계함으로써 DC 전류조절이 가능하여 이득과 출력 임피던스 컨트롤이 가능하도록 하였다. 또한, CG-TIA는 on-chip bandgap reference로부터 bias 전압을 이용하고, 소스팔로워 출력버퍼를 사용하여 고주파수 이득을 높였으며, 기본적인 구조 상 CG-TIA는 채널당 칩 면적이 Inverter TIA에 비해 1.26배 작게 설계되었다. 포스트 레이아웃 시뮬레이션 결과, 제안한 Inverter TIA 어레이는 각 채널당 57.5-dB${\Omega}$ 트랜스임피던스 이득, 340-MHz 대역폭, 3.7-pA/sqrt(Hz) 평균 잡음전류 스펙트럼 밀도, 및 2.84-mW (16채널 45.4-mW) 전력소모를 가졌다. CG-TIA 어레이는 채널당 54.5-dB${\Omega}$ 트랜스임피던스 이득, 360-MHz 대역폭, 9.17-pA/sqrt(Hz) 평균 잡음전류 스펙트럼 밀도, 4.24-mW (16채널 67.8-mW) 전력소모를 가졌다. 단, 펄스 시뮬레이션 결과, CG-TIA 어레이가 200-500-Mb/s 동작속도에서 훨씬 깨끗하게 구분 가능한 출력펄스를 보였다.

• 한국수자원학회논문집
• /
• 제54권6호
• /
• pp.433-442
• /
• 2021

하구역으로부터 감조하천 상류로 전파되는 조석파의 특성을 고찰하기 위하여 먼저 국내 연안에서 천문조인 M2분조와 천해조인 M4분조에 대한 조화상수를 분석해 조석비대칭 현상을 파악하였다. 하구역에서 천해조가 크게 발달함에 따라 한강과 금강의 경우 창조우세, 영산강의 경우 낙조우세가 형성된다. 이러한 조석비대칭 현상은 조류속 자료를 분석함으로써 재확인할 수 있다. 조류속 분석 결과 왕복성 조류패턴을 보이는 금강하구와 영산강하구의 경우와는 달리 한강하구의 경우 강화도 주변의 복잡한 지형 및 수로에 기인하여 회전성 조류패턴이 나타나기도 한다. 그러나 잔차류를 제거할 경우 조류속 관측자료 역시 조위와 일관된 창낙조우세를 보이고 있다. 하구역에서 형성된 조석비대칭 현상은 조석파가 감조하천 상류로 전파되면서 천해조의 성장과 더불어 더욱 심화되는 경향이 있다. 하천의 마찰특성과 단면형상에 따라 조석파의 전파양상에도 차이가 발생하여 수심이 얕은 한강과 금강의 경우 SD하구로 분류되어 에너지 소산이 매우 큰 반면 수심이 깊은 영산강의 경우 WD하구로 분류되어 에너지 소산이 덜 한 것으로 나타나고 있다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.265-273
• /
• 2012

Data stability and leakage power dissipation have become a critical issue in scaled SRAM design. In this paper, an advanced 8T SRAM cell improving the read and write stability of data storage elements as well as reducing the leakage current in the idle mode is presented. During the read operation, the bit-cell keeps the noise-vulnerable data 'low' node voltage close to the ground level, and thus producing near-ideal voltage transfer characteristics essential for robust read functionality. In the write operation, a negative bias on the cell facilitates to change the contents of the bit. Unlike the conventional 6T cell, there is no conflicting read and write requirement on sizing the transistors. In the standby mode, the built-in stacked device in the 8T cell reduces the leakage current significantly. The 8T SRAM cell implemented in a 130 nm CMOS technology demonstrates almost 100 % higher read stability while bearing 20 % better write-ability at 1.2 V typical condition, and a reduction by 45 % in leakage power consumption compared to the standard 6T cell. The stability enhancement and leakage power reduction provided with the proposed bit-cell are confirmed under process, voltage and temperature variations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.498-504
• /
• 2012

The water-cooled Permanent Magnet Linear Synchronous Motor (PMLSM) has a wide range of applications due to high efficiency, high thrust force density and high acceleration. In order to ensure normal operation and maximum output, both the magnetic and thermal performance are vital to be considered. Based on ANSYS software, electromagnetic and thermal finite-element analysis (FEA) models of a 14-pole, 12-slot water-cooled PMLSM are erected adopting suitable assumptions. Firstly, the thrust force and force ripple with different current densities are calculated. Secondly, the influence of different water flow on the motor heat dissipation and force performance under different operationional conditions are investigated and optimized. Furthermore, for continuous operation, the temperature rise and thrust feature are studied under the rated load 8A, the proper temperature $120^{\circ}C$ and the limited temperature $155^{\circ}C$. Likewise, for short-time operation, the maximum duration is calculated when applied with a certain large current. Similarly, for intermittent operation, load time as well as standstill time are determined with the optimal current to achieve better thrust performance.