Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Magnetic and Thermal Analysis of a Water-cooled Permanent Magnet Linear Synchronous Motor

  • Zhang, Xinmin (College of Electrical Engineering, Zhejiang University) ;
  • Lu, Qinfen (College of Electrical Engineering, Zhejiang University) ;
  • Cheng, Chuanying (College of Electrical Engineering, Zhejiang University) ;
  • Ye, Yunyue (College of Electrical Engineering, Zhejiang University)
  • Received : 2012.10.13
  • Accepted : 2012.11.10
  • Published : 2012.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The water-cooled Permanent Magnet Linear Synchronous Motor (PMLSM) has a wide range of applications due to high efficiency, high thrust force density and high acceleration. In order to ensure normal operation and maximum output, both the magnetic and thermal performance are vital to be considered. Based on ANSYS software, electromagnetic and thermal finite-element analysis (FEA) models of a 14-pole, 12-slot water-cooled PMLSM are erected adopting suitable assumptions. Firstly, the thrust force and force ripple with different current densities are calculated. Secondly, the influence of different water flow on the motor heat dissipation and force performance under different operationional conditions are investigated and optimized. Furthermore, for continuous operation, the temperature rise and thrust feature are studied under the rated load 8A, the proper temperature $120^{\circ}C$ and the limited temperature $155^{\circ}C$. Likewise, for short-time operation, the maximum duration is calculated when applied with a certain large current. Similarly, for intermittent operation, load time as well as standstill time are determined with the optimal current to achieve better thrust performance.

Keywords

References

  1. Changsoo Jang, Jong Young Kim, Yung Joon Kim, Jae Ok Kim, "Heat Transfer Analysis and Simplified Thermal Resistance Modeling of Linear Motor Driven Stages for SMT Applications," IEEE Trans. Components and packaging Technologies, Vol. 26, No. 3, September 2003 pp.532 - 540. https://doi.org/10.1109/TCAPT.2003.817643
  2. Nattapon Chayopitak, David G. Taylor, "Thermal Analysis of Linear Variable Reluctance Motor for Manufacturing Automation Applications," IEEE International Conference. Electric Machines and Drives, May 2005 pp.866- 873.
  3. Aldo Boglietti, Andrea Cavagnino, David Staton,Martin Shanel, Markus Mueller, Carlos Mejuto, "Evolution and Modern Approaches for Thermal Analysis of Electrical Machines," IEEE Trans. Industrial Electronics, Vol. 56, No. 3, March 2009 pp.871 - 882. https://doi.org/10.1109/TIE.2008.2011622
  4. Ximin Zhang, Zepei Ren, Feiming Mei, "Heat Transfer Theory", China building industry press. July 2007.
  5. Frank P.Incropera, David P. DeWitt, "Introduction to heat transfer -Third edition-", School of Mechanical Engineering Purdue.
  6. Ho-Jin An, Ji-Hyun Kim, Ki-Bong Jang, Gyu-Tak Kim, "Optimal Current Density with Coil Thickness of Double Sided Permanent Magnet Linear Synchronous Motor (PMLSM)", Department of Electrical Engineering, Changwon National University.