• 전기학회논문지P
• /
• 제58권4호
• /
• pp.495-498
• /
• 2009

To improve the efficiency of the high voltage cable for BLU(backlight unit) of TFT-LCD(Thin Film Transistor-Liquid Crystal Display), the analysis for the trial products(UL3239, UL3633) is conducted by using SEM(scanning electron microscope) and EDX(Energy Dispersive X-ray Spectroscopy). The result that it is possible to accumulate the know-how to about stranding pitch through effective improvement of stranding process. The troubles which are the badness of withstanding voltage and tensile strength etc. are solved by development of excellent material. Furthermore, phenomenon of conductor unfasten in the harness work is solved by improvement of the stranding wire process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1530-1533
• /
• 2005

We investigated under-gate type carbon nanotube field emitter arrays (FEAs) for back light unit (BLU) in liquid crystal display (LCD). Gate oxide was formed by wet etching of ITO coated glass substrate instead of depositing $SiO_2$ on the glass substrate. Wet etching is easer and simpler than depositing and etching of thick gate oxide to isolate the gate metal from cathode electrode in triode. Field emission characteristic s of triode structure were measured. The maximum current density of 92.5 ${\mu}A/cm^2$ was when the gate and anode voltage was 95 and 2500 V, respectively at the anode-cathode spacing of 1500 ${\mu}m$.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.27-31
• /
• 2006

Non-contact transportation system using air cushion for the manufacturing of large-sized LCD panels was considered. Flow characteristics between air pad and glass plate was analyzed using computational fluid dynamics method to obtain optimized air pad configurations. Effects of the design variables such as hole arrays from which gas is injected, gas-feeding method into the gas supplying channels, and horizontal and vertical pitches of clusters of holes were studied. Optimized air pad unit gave evenly distributed pressure contour on the glass surface and well-suspended levitation height in the experiment.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.49-53
• /
• 2009

In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

• 한국광학회지
• /
• 제19권1호
• /
• pp.43-47
• /
• 2008

현재 TFT-LCD(Thin Film Transistor Liquid Crystal Display)에 사용되는 BLU(Back Light Unit) 패턴 크기는 수 십 ${\mu}m$인데 반해, 최근에는 BLU 패턴의 크기를 수 ${\mu}m$ 또는 그 이하로 조절함으로써 출력광의 휘도를 증가시키고 균일도를 향상시키고자 하는 연구가 진행되고 있다. 본 연구에서는 패턴의 크기, 분포 및 점유 면적이 출력광의 분포에 미치는 영향을 조사하였다.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.23-28
• /
• 2008

A high speed automated pitch variation unit (HAPU) related to semiconductor category sorting movement of the test handler system was developed. In the design process, 'DMADOV' step of 6-Sigma method has been applied. The design result for the desirable pitch variation was a 3:1 reduction rack-pinion and a linkage which are operated by servomotors. The realization and reliability of the mechanism was obtained at the design stage by FEM analysis, and by robust design using Taguchi orthogonal array against weight and deformation. Finally, the validity of the high speed variation mechanism was confirmed via inspection using a high speed camera while performing pitch variation.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1340-1345
• /
• 2010

FRC(Frame Rate Control) has been applied to the monitor and TV product as part of cost-saving in many flat panel display manufacturers. As FRC can represent the same number of gray scale level with bits of a smaller amount than bits of the input image data, it is widely used. However, FRC causes visual artifacts by using repeatedly pre-designed the FRC unit size of block pattern in display devices. Therefore, this paper analyzes the cause of the visual artifacts. And in order to improve them, it proposed the pattern arrangement of FRC unit blocks through frame rolling method as analytic solution for the first time. So, we could embody causes of FRC noise. Using the proposed structure, more robust pattern to FRC noise will be designed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1383-1385
• /
• 2009

This paper suggests that testing method and equipment structure to detect potential failures of LCD cells. LCD Cell Aging Tester is the unique process to detect failures related with ASG circuits. This system consists of four components that is Aging chamber, work table, probe contact unit, and pattern generator. The key factor of the concept is temperature aging and HVS driving. Complicated combination of test parameters including voltage, temperature and frequency provided practical burn-in conditions eligible for prediction of mass production.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.847-851
• /
• 2006

본 논문에서는 레이더와 전자정보 장비를 사용해서 획득한 각각의 정보를 종합해서 레이더에서 획득한 표적신호와 전자정보에서 획득한 전자파 정보를 융합하는 기술을 제시한다. 레이더와 전자정보 장비를 융합하면 표적을 정확하게 확인할 수 있기 때문에 레이더의 탐지 오차율이 줄어들고 표적에 대한 상세 정보를 확보할 수 있으며, 정보융합 모듈에서 융합한 내용을 종합표시기에서 통합된 정보를 표시할 때 장비의 성능을 향상시킬 수 있으며 표적식별이나 목표물 선정에 사용할 수 있다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권4호
• /
• pp.161-164
• /
• 2006

In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.