• The Research Journal of the Costume Culture
• /
• v.8 no.2
• /
• pp.305-314
• /
• 2000

The purposes of this study were (1) to segment the men in twenties and thirties according to apparel shopping orientation and (2) to create a profile for each group with regard to importance of store attributes, self-image and demographic variables. The questionnaire was administered to men in twenties and thirties living in Seoul and data were analyzed by frequency, percentage, factor analysis, cluster analysis, χ²-test, and one-way ANOVA. The results were as follows : 1) By cluster analysis of apparel shopping orientation factors, three groups were identified : (1) ostentatious shopper(44.5%), (2) practical shopper(21.8%), and (3) individuality-pursuit shopper(33.7%). 2) Three groups were compared on store attributes and self-image. Significant differences were found among the three groups on two variables. Ostentatious shoppers pursued the masculine and sophisticated image and tended to prefer the store image and reputation, convenient transportation and parking place, and variety of products. Practical shoppers pursued the self-image which reflected the conservative and not-noticeable image and considered the moderate price of the products most importantly. Finally, individuality-pursuit shoppers preferred the sexy and noticeable image and considered the display and accommodation of the trendy products. 3) In terms of the demographic variables the significant differences were found on education, occupation, monthly income, and marital status. In general ostentatious shoppers tended to earn higher monthly income than those of the two groups. Practical shoppers tended to be well-educated and individuality-pursuit shoppers tended not to be married.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1244-1247
• /
• 2004

For obtaining the best panel quality of color filter on array(COA) architecture in TFF LCD, we investigated the influence of deposition temperature, $O_2$ flow, thickness on the optical transmittance, wet etching and adhesion properties of IZO deposited onto each color photo resist(red, green, blue). Average transmittance of the pixel single layer in the visible range(between 380 and 780nm) was mainly affected by thickness and showed maximum at 1250 ${\AA}$ while the thickness showing peak transparency in each R, G, B wavelength was different. The relation was calculated by using bi-layer transmission and reflectance model, which corresponded to experimental data very well. The adhesion of IZO deposited on each color PR was found to have enhanced value except red PR case, compared to that of IZO which was deposited on $SiN_x$. Wet etching pattern linearity was decreased as the thickness increased. The thickness of IZO was one of vital factors in order to optimize overall pixel process for fabricating COA structure.

• YAKHAK HOEJI
• /
• v.50 no.1
• /
• pp.33-39
• /
• 2006

We have previously reported the minimum criteria that can be applied to evaluate efficacy and safety of a DNA vaccine with use of Streptococcus pneumoniae DNA vaccine (SPDNA). The SPDNA was formulated by inserting the DNA sequences that are codons specific for the carbohydrate epitope in the capsule of S. penumoniae by phage display peptide library. Administration of the SPDNA into mice induced both humoral and cell-mediated immunities. The induction was protective even in the absence of CD4+ T lymphocyte in mice. Profiles of cytokine and isotyping of antibody displayed tendency of the Th1. In continuation of these studies, we examined if the efficacy of the SPNDA was provoked by the peptide recognized by codons specific for the capsule. Results showed that the peptide vaccine formulae (SPP) induced protective antibody in mice as did the SPDNA. Involvement of the cell-mediated immunity was also determined. Possible side effects of autoimmune diseases such as myositis and C3a production and tumor-formation were undetectable in mice given 7 times of SPDNA vaccination during entire of 92 days. Even after the frequent immunization, immunogenicity of the SPDNA was observed as determined for antibody production, suggesting that there was no immunotolerance provoked. All together, these examining factors would be applied to measurement of a DNA vaccine safety regarding the immunopathological aspect.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.147-151
• /
• 2008

There are many attempts to transfer many applications from PC to mobile which has small screen, cause of a development of mobile technology. To display the whole information of the PC on the tiny screen, it makes many Horizontal Scroll, Horizontal Scroll in mobile screen makes people to miss where they are reading easily and such a frequent error makes readability of the information in mobile screen low. We suggest a Line Marker to help readability of the mobile screen high. This study shows the relationship between the conditions of Line Marker such as fixed or moved or not exists and the factors of the reading time and satisfaction.

• Korean Journal of Occupational Health Nursing
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2015

Purpose: The purpose of this study was to explore the impact of emotional labor on burnout in stroke patients' caregivers. Methods: Data were collected from 141 paid caregivers working at 3 hospital across Gyeonggi province from January to April 2014. Results: The caregivers' level of emotional labor showed 2.9/5.0 points and burnout, 2.5/5.0. A significant correlation was found among attentiveness to required display rules (p=.007), emotional dissonance (p=.001) and burnout. In a multiple regression, age (${\beta}$=.279, p=.001) and emotional dissonance (${\beta}$=.193, p=.046) were associated with burnout in caregivers. These factors attributed to 16.9% of variance in the burnout of caregivers. Conclusion: These results suggest that burnout in stroke patients' caregivers can be influenced by emotional dissonance as well as physical condition such as age. Accordingly, it is necessary to be develop support program to deal with mental labor to improve their mental health and lighten their workload for caregivers.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.60-63
• /
• 2007

최근, 핸드폰은 일상생활의 필수품이 되었다. 특히 카메라가 장착된 핸드폰은 개인홍보와 오락요소로의 대표적인 도구로 사용된다. 나아가 양안카메라가 적용된 핸드폰은 사용자에게 입체감을 전달할 것이며, 입체감은 보다 효과적인 개인홍보 및 오락성을 제공할 것이다. 핸드폰은 휴대가 용이하지만 제한된 표시소자의 크기 및 해상도로 인하여 입체시 구현 시 사용자에게 손실된 정보 및 낮은 임장감을 제공한다. 이에 본 연구는 기존의 입체시 구현에 대한 구속조건들을 분석하고 핵심 요인을 산출하여, 핸드폰 환경에서의 최적의 입체시 구현을 위한 새로운 구속조건의 범위를 정량화하였다. 대표적인 구속조건으로는 수평, 수직 시차량이 고려되었다. 본 연구의 결과는 핸드폰용 양안카메라의 제작공차 및 효과적인 시차영상 제작을 위한 기준을 제시한다. 연구에 사용된 제품으로는 QVGA해상도(320*240) 및 2.8' 크기의 표시소자인 PDA폰이며, 입체시에 대한 구속조건을 정량화하기 위하여 수직, 수평이동이 가능한 지그를 사용하여 실험의 정확성을 높였다. 피실험자는 10명이며 남자 7명, 여자 3명으로 구성되었다.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1245-1251
• /
• 2017

The objective of this study is to investigate the satisfaction of elementary, middle and high school nutrition teachers in the Chungnam province concerning the free school food service. We surveyed satisfaction related to policies on school food service and the school food service center. Satisfaction on the school food service center was separated according to four dimensions; perception, food materials, operational system and service. Furthermore, we analyzed factors that affect satisfaction with the school food service center with a multiple regression model. First, satisfaction about the free school food service and dietary life education are higher than the total average of satisfaction with the policy about the school food service. Second, satisfaction about a variety of food materials and reasonable prices are lower than total average of satisfaction with the school food service center. Third, when more teachers have a high level of a positive perception and have higher satisfaction with the operational system of the school food service center, then they also subsequently display higher satisfaction with the school food service center. Therefore it is necessary to improve or make up for pricing and diversity on food materials by the school food service center.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1348-1355
• /
• 1997

Machine element design is a very important course in the undergraduate program of mechanical engineering in that it presents traditional design concepts. While computer aided design(CAD) receives more attention, students tend to ignore the machine element design or traditional design concepts. However, design methodologies related to machine elements are utilized quite often in practical fields. Also, design methodologies provide good insight for the decision making process of modern design. Generally, CAD is used for simple drafting without the real design process in the undergraduate program. Design software has been developed for various machine elements. Through menu display, a user can select or furnish the design input such as design objects, dimensions, environmental forces and usages, and safety factors. Then the software carries out the design processes which are the same as those of textbooks. The result of the design is filtered to have the values in the standards. The designed machine element is drawn via commercial CAD software. The software has been developed with C language on a personal computer. The developed software is being utilized successfully in a design course, and the experiences are discussed in this paper. The software can be used in industries which require the repeated process of the machine element design.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.728-731
• /
• 2005

A light guide panel (LGP) is an element of the LCD back light unit, which is used for display devices. In this study, a laser marking process is applied to the fabrication of light guide panels as the new fabrication process. In order to obtain a light guide panel which has high luminance and uniformity, four principal parameters such as power, scanning speed, ratio of line gap, and number of line were selected as important factors. A Web-based design tool was developed to generate patterns of light guide panel, and the tool may assist the designer to develop optimized patterns. Topcon-BM7 was used for luminance measurement of each specimen 100mm$\times$100mm area. By Taguchi method optimized levels of each parameters such as 40W of power, 30mm/s of scanning speed, 100:50 ratio of pattern gap, and 90 line of pattern were found by Taguchi method.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1433-1435
• /
• 1997

ZnO shows the properties of wide conductivity variation, high optical transmittance, and excellent piezoelectricity. Using these properties of ZnO, the material applications were extended to sensors, SAW filters, solar cells, and display devices. This paper investigated transmittance influencing factors for thin film ZnO grown by RF magnetron sputtering. The growth rate and structural investigation were carried out in conjunction with optical transmittance characteristics of thin film ZnO. The glass substrate temperature of $175^{\circ}C$ exhibited a preferential crystallization along (002) orientation. Transmittance of ZnO film deposited at the substrate temperature of $175^{\circ}C$ showed higher than 92%. An active sputter gas was investigated with a variation of $O_2$ partial pressure from 0 to 10% in an Ar atmosphere. ZnO film grown in 100% Ar gas shows that a reduced transmittance of 82% at the short wavelengths and decreased resistivity value. As the partial pressure of $O_2$ gas increased, the optical transmittance was increased above 90% at the short wavelengths, however, resistivity was drastically increased to higher than $10^4{\Omega}$-cm.