• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2005

For the simulation of tsunami propagation an active dispersion-correction two-dimensional finite element model has been developed based on a shallow-water wave equation. This model employs an arbitrary triangular mesh and an explicit time integration scheme. However, the physical dispersion effects as included in the Boussinesq equations can be taken into account in the computation. The validity of the dispersion-correction scheme developed in this study is verified through the comparison of numerical solutions calculated using the new scheme with analytical ones considering dispersion effect of waves. As a result, the present model is shown to be considerably accurate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.723-725
• /
• 2013

The compensation characteristics are investigated as a function of the position an optical phase conjugation (OPC) in the optical transmission links with a randomly distributed residual dispersion per span (RDPS). The simulation results show that the optimal net residual dispersion (NRD) is decided to be 10 ps/nm and -10 ps/nm by precompensation and postcompensation, respectively, which are independence of the OPC positions.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.327-333
• /
• 2015

This paper aims to manufacture nonwoven fabrics by wet-laid technology using Vectran$^{(R)}$ one of the highly favoured high-performace fiber. In previous study, a novel evaluation on fiber dispersion was studied to select optimum surfactant by the need for the control of fiber dispersion in water with reference to wet-laid nonwoven technology. 3 Types of sulfonate anionic surfactants were chosen and added in a stage of agitation to improve dispersion behavior of fibers in water. It was observed that the state of fiber dispersion in water affected various properties of nonwovens, including appearance, physical properties, and mechanical properties. Nonwoven added SDBS was uniform in web structure, thickness and weight. Its average pore was small in size and consisted of fine pores and the value of porosity was high. Further, the difference of tensile value between 2 directions was the least. Consequentially, as the dispersion behavior of fiber increases, nonwoven shows more balanced and uniform physical properties in all directions.

• Korean Journal of Cognitive Science
• /
• v.23 no.1
• /
• pp.73-95
• /
• 2012

Two experiments were conducted to verify how the factors of attentional dispersion, reason for waiting, and cue of time flow affect the perceived waiting time. In experiment 1, based on the characteristics of waiting experience that Maister(1985) suggested, levels of attentional dispersion and whether or not offering a reason for waiting were manipulated. Participants estimated elapsed time(the objective time was 10 minutes) using either prospective or retrospective estimation method. Overall results were that they overestimated the elapsed time regardless of the experimental conditions. However, both main effects of the attentional dispersion and the reason for waiting were statistically significant. That is, when attention was more dispersed and when the reason was given, overestimation of elapsed time was reduced. No difference was found between the two estimation methods, and none of the interaction was significant. Experiment 2 was a replication of Experiment 1 except that a cue of time flow was added by using scroll bar on a computer screen. Because it has been suggested that the cue can help us to manage the waiting time and result in differences between the two time estimation methods. The results showed that main effects of the attentional dispersion and the reason for waiting were significant as those in Experiment 1. In addition, main effect of time estimation method and the three-way interaction were also significant. None of two-way interaction was significant. That is, the perceived waiting time is much shorter in the retrospective method, and the effects of the attentional dispersion and the reason of waiting were dependent upon the estimation methods. Both experiments showed that offering a clear reason for waiting is more important than the attentional dispersion in reducing the perceived waiting time. Some implications of these results for the service industry and the future direction of research were discussed in the final section.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.3
• /
• pp.211-223
• /
• 2000

The atmospheric dispersion of a pollutant emitted from a hypothetical source located in the middle of the Yochon Industrial Estate was simulated by using the Regional Atmospheric Modeling System (RAMS). Four horizontally nested grids were employed: the coarsest one covered the southern part of the Korean Peninsula including Mt. Chiri and the finest one covered the Yochon Industrial Estate and the surrounding area. Wind fields were initially assumed horizontally homogeneous with a wind speed of 4m/s, the average for the Yosu area, and were developed without both external forces and diurnal changes in order to investigate the terrain-induced phenomena. Wind directions that could emphasize the terrain effects on the pollutant transport and that could carry pollutants to a highly-popluated area were selected for the dispersion study. A pollutant was released for 24hours from a grid-base volume source after a 24-h blank run for developing the wind field. The dispersion study showed that the pollutant from the present source location did not directly affect the Yosu City, but showed high concentrations at locations behind the hills 5 to 6 km away from the source according to wind directions. When the wind speed was low, close to calm condition, the pollutant was detected at upstream locations 6 to 7 km from the source. In comparison with the results from the RAMS simulation, the Industrial Source Complex Short-Term Model(ISCST3) predicted a narrow dispersion that was sensitive to the wind direction. When the wind velocity was affected by the local environment, the ISCST3 calculation using that data also gave a lop-sided result, which was different from the distribution of the pollutant reproduced by RAMS.

• Journal of the korean society of oceanography
• /
• v.39 no.2
• /
• pp.119-135
• /
• 2004

A three-dimensional numerical model using POM (the Princeton Ocean Model) is established in order to understand the dispersion processes of the Yangtze River water in the Yellow and East China Seas. The circulation experiments for the seas are conducted first, and then on the bases of the results the dispersion experiments for the river water are executed. For the experiments, we focus on the tide effects and wind effects on the processes. Four cases of systematic experiments are conducted. They comprise the followings: a reference case with no tide and no wind, of tide only, of wind only, and of both tide and wind. Throughout this study, monthly mean values are used for the Kuroshio Current input in the southern boundary of the model domain, for the transport through the Korea Strait, for the river discharge, for the sea surface wind, and for the heat exchange rate across the air-sea interface. From the experiments, we obtained the following results. The circulation of the seas in winter is dependent on the very strong monsoon wind as several previous studies reported. The wintertime dispersion of the Yangtze River water follows the circulation pattern flowing southward along the east coast of China due to the strong monsoon wind. Some observed salinity distributions support these calculation results. In summertime, generally, low-salinity water from the river tends to spread southward and eastward as a result of energetic vertical mixing processes due to the strong tidal current, and to spread more eastward due to the southerly wind. The tide effect for the circulation and dispersion of the river water near the river mouth is a dominant factor, but the southerly wind is still also a considerable factor. Due to both effects, two major flow directions appear near the river mouth. One of them is a northern branch flow in the northeast area of the river mouth moving eastward mainly due to the weakened southerly wind. The other is a southern branch flow directed toward the southeastern area off the river mouth mostly caused by tide and wind effects. In this case, however, the tide effect is more dominant than the wind effect. The distribution of the low salinity water follows the circulation pattern fairly well.

• Journal of Advanced Navigation Technology
• /
• v.20 no.2
• /
• pp.161-166
• /
• 2016

In high capacity and long haul optical communication systems, signal distortion is induced by chromatic dispersion and nonlinear effects of optical fibers. Dispersion management (DM) combining with mid-spans spectral inversion (MSSI) is one of the various techniques for overcoming this drawback. The most simple configuration of DM link is obtained by uniformly distributing the lengths of single mode fiber (SMF) and residual dispersion per span (RDPS) over whole fiber spans consisted of optical link. In this paper, the system performances in the uniformly distributed DM link combined with MSSI are assessed as a function of the number of fiber spans, because the system performances in this configuration are used as the significant performance criterion in other link configurations, such as the artificial distribution or the random distribution of SMF lengths and RDPS.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.123-128
• /
• 2024

When mid-span spectral inversion (MSSI), which inverts the propagated wave into phase-conjugated wave in the middle of the entire transmission distance, is combined with dispersion-managed link, it is very effective in compensating for the wavelength division multiplexed (WDM) signal distortion due to chromatic dispersion and nonlinear effects. In this MSSI combined dispersion-managed link, the shape of the dispersion map, channel data rate, channel wavelength and wavelength spacing, etc. affect the compensation and, consequently, determine the transmission distance and capacity of the WDM signal. In this paper, the compensation according to the extinction ratio of the return-to-zero (RZ) pulse that constitutes the WDM signal in the MSSI combined distributed control link was numerically analyzed. As a result of the simulation, it was conformed that the extinction ratio to obtain the best compensation should be determined depending on the shape of the dispersion map and the size of the residual dispersion per span, which determines the specific shape of the dispersion map. These results show a significant difference from the results in a general optical transmission system, where as the extinction ratio increases, the power difference between the '1' and '0' signals increases, thereby improving reception performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.105-108
• /
• 1996

We have studied the anisotropic dispersion force effects for surfaces alignment of liquid crystals (LCs) on rubbed polystyrene (PS) surfaces by unidirection. In microphotographs of the textures, we obtained the nematic (N) LCs are shown to align in both direction parallel and Perpendicular to the rubbing for region up to medium rubbing, however to align in the direction perpendicular to the rubbing for strong rubbing legion. We suggest that the anisotropic dispersion force is very important rather than macro-surface groove effect to uniform alignment of LCs. We also measured the temperature dependence of extrapolation length of 5CB on rubbed PS surfaces for strong rubbing. It is shown that the polar anchoring strength of 5CB is very weak on rubbed PS surface compared to the rubbed polyimide (Pl) surface.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.734-739
• /
• 1994

Elastic wave propagation in discrete random medium is studied to evaluate the effects of particle resonance on dispersion and attenuation of composite materials containing spherical inclusions. The frequency-dependent wave speed and attenuation coefficient can be obtained from proposed self-consistent method. It can be observed that the abrupt increase of effective wave speed and the concurrent peak of attenuation at low frequency is due to the lowest resonance of particles, whereas those in high frequency region are due to higher ones. The lowest resonance is mainly caused by the density mismatch and higher resonances by the stiffness mismatch between matrix and particles. The dispersion and attenuation of elastic waves in particulate composites are affected by the lowest resonance much than by higher ones.