• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.440-446
• /
• 1996

The multiple-ridged circular waveguides is analyzed using Fourier series and the mode matching technique. The enforcement of the boundary conditions yields the simultaneous equations for the field coefficient inside the waveguides. The simultaneous equations are solved to represent a dispersion relation in an analytic series form. The numerical computation is performed to illustrate the behavior of the cutoff wavenumbers in terms of number, length and angle of ridges. The presented series solution is exact and rapidly-convergent so that it is efficient for numerical computation. A simple dispersion relation based on the dominant mode analysis is obtained and is shown to be very accurate for most practical applications.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.215-219
• /
• 2005

Liquefied petroleum gas (LPG) has been used as motor fuel due to its low emissions and low cost. A liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray injecting from single hole injector. Two different test conditions are given, which are a fully developed spray case with various injection pressures and a developing spray case with ambient pressure variation. The LPG spray photographs are compared with the sprays of gasoline and diesel fuel at the same conditions, and the spray angles and penetration lengths are also compared, and then the spray behavior is analyzed. The LPG spray photos show that the dispersion characteristic depends very sensitively on the ambient pressure soon after injection. The spray angle is very wide in a low ambient pressure condition until the saturated pressure, but the angle is quickly reduced at the condition over the pressure. However, the down stream of the LPG spray shows much wider dispersion and less penetration than those of gasoline and diesel sprays regardless ambient pressure condition.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.105-119
• /
• 1997

Barnwal and Paul(1988) derived the likelihood ratio statistic and $C(\alpha)$ statistic for testing the equality of the means of several groups of count data in the presence of a common dispersion parameter. These tests are generalized to be applicable without the restriction of a common dispersion parameter. And the assumed model of data is also extended from negative binomial to double exponential Poisson model. Monte Carlo simulations show the superiority of $C(\alpha)$ statistic based on the double exponential Poisson family which has a very simple form and requires estimates of the parameters only under the null hypothesis.

• Communications for Statistical Applications and Methods
• /
• v.21 no.3
• /
• pp.235-243
• /
• 2014

Constrained Bayesian estimates overcome the over shrinkness toward the mean which usual Bayes and empirical Bayes estimates produce by matching first and second empirical moments; subsequently, a constrained Bayes estimate is recommended to use in case the research objective is to produce a histogram of the estimates considering the location and dispersion. The well-known squared error loss function exclusively emphasizes the precision of estimation and may lead to biased estimators. Thus, the balanced loss function is suggested to reflect both goodness of fit and precision of estimation. In insurance pricing, the accurate location estimates of risk and also dispersion estimates of each risk group should be considered under proper loss function. In this paper, by applying these two ideas, the benefit of the constrained Bayes estimates and balanced loss function will be discussed; in addition, application effectiveness will be proved through an analysis of real insurance accident data.

• Water for future
• /
• v.12 no.1
• /
• pp.56-59
• /
• 1979

A prompt subsurface runoff producing mechanism whih creaters a depletion curve of direct runoff hydrograph is simulated by a dead zone dispersion model technique. Runoff processes are carried out by routing of the outflow resulted from previous linear channel and effective rainfall from its corresponding subwatershed through a series of conceptual linear channels representing subwatersheds of a catchment. Working rules are explained for evaluation the model parameters such as translatory velocity, diffusive factor, and parameters concerning the infiltration and relative magnitude of the prompt subsurface flow region.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2003

In this paper, the numerical characteristics of the recently developed Envelope ADI-FDTD are investigated. Through numerical simulations, it is shown that the unconditional stability of the Envelope ADI-FDTD is independent of time step size and we can get better dispersion accuracy than the traditional ADI-FDTD by analyzing the envelope of the signal. This fact gives the opportunity for extending the temporal step size to the Nyquist limit in certain cases. Numerical results show that the Envelope ADI-FDTD can be used as an efficient electromagnetic analysis tool especially in the single frequency or band limited systems.

• IE interfaces
• /
• v.18 no.4
• /
• pp.465-476
• /
• 2005

Evolutionary operation is a useful tool for improving full-scale manufacturing process by systematically changing the levels of the process variables without jeopardizing the product. This paper presents a system design for the evolutionary operation software called 'evolutionary optimizer'. Evolutionary optimizer consists of four modules: factorial design, many variables, mixture, and mean/dispersion. Context diagram, data flow diagram and entity-relationship modelling are used to systematically design the evolutionary optimizer system.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.449-455
• /
• 1997

A theoretical study is presented for the prediction of the scattering of obliquely incident plane acoustic wave by transversely isotropic cylindrical shells immersed in water. In dorder to illustrate the vailidity of the theory backscattering form functions are compared with the existing results for degenerated problems: the catterings by isotropic shell and transversely isotropic solid cylinder. The unidirectional fiber reinforced boron-aluminum composites are selected as a model of transversely isotropic materials having potential applications in practice. From the resonant scattering analysis of the partial backscattering form functions, the dispersion curves for fluid-borne Stoneley wave, guided wave along the shell, and the lowest three Lamb type waves can be found. The Lamb type dispersions are compared with those of the flat plate. The variation of anisotropy significantly affects the properties of circumferential waves. From these results, it can be possible to identify parametrically the material properties of anisotropic cylindrical targets.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.248-257
• /
• 2011

It was reported recently that railpads can be included as a continuous elastic support of the rail and the model was justified from experiments. In general, however, railpads are installed discretely on sleepers with a regular span. The effect of the discrete railpad was not clearly examined so far in such a high frequency range. In this paper, the effect of the railpads in track modelling for high frequencies is investigated by means of the finite element analysis. To do that, the railpads are regarded as 'a continuous elastic support' and 'a discrete elastic support' in this paper. The dispersion relations and decaying features are predicted and compared between the two models up to 80 kHz.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.232-236
• /
• 2011

We analyze the linear equalizers used in optically amplified on-off-keyed (OOK) systems to combat chromatic dispersion (CD) and polarization mode dispersion (PMD), and we derive the mathematical minimum mean squared error (MMSE) performance of these equalizers. Currently, the MMSE linear equalizer for optical OOK systems is obtained by simulations using adaptive approaches such as least mean squared (LMS) or constant modulus algorithm (CMA), but no theoretical studies on the optimal solutions for these equalizers have been performed. We model the optical OOK systems as square-law nonlinear channels and compute the MMSE equalizer coefficients directly from the estimated optical channel, signal power, and optical noise variance. The accuracy of the calculated MMSE equalizer coefficients and MMSE performance has been verified by simulations using adaptive algorithms.