• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.495-506
• /
• 2013

본 연구에서는 전단류 분산이 이송과 난류에 의한 확산의 결합에 의해 발생한다는 Taylor (1954)의 가정을 바탕으로 개념적 모형을 구성하고, 이를 3차원 개수로에 적용하여 오염물질의 혼합과정을 재현할 수 있는 시간분리 혼합모형(Time-split Mixing Model; TMM)을 개발하였다. 개발된 모형은 연산자 분리 기법(operator split method)과 유사하게 혼합과정을 종방향 혼합과 횡방향 혼합으로 분리하고, 유속 연직편차에 의한 농도분리과정과 난류확산에 의한 연직방향 혼합과정을 순차적으로 반복 계산함으로써 2차원 이송-분산을 재현한다. 수치모의 결과, 제안된 모형은 수로벽면에 의한 농도중첩 효과를 잘 반영하고 있으며, Taylor 구간 내에서 2차원 이송-분산 모형의 해석해와 거의 일치하고 있음을 확인하였다(Chatwin, 1970). 본 모형은 하상경사, 하폭 대 수심 비, 혼합시간 등의 변화에 따라 분산 정도를 달리 재현하고 있으며, 산정된 종분산계수는 Elder(1959)가 제안한 상수값과는 달리 혼합시간에 따라 변화하는 양상을 나타냈다. 횡분산계수의 경우, Sayre와 Chang(1968), Fischer 등(1979)이 실험을 통해 제시한 값과 유사한 범위를 나타냈다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.69-73
• /
• 2005

The arc dispersion and contacts characteristics were analyzed according to switching off Residual Current Protective Device(RCD) switch. Arc dispersion process was taken by high speed imaging system at a rate of 10,000 frames per second. When RCD was switched from on to off, art was observed and it took about 2.3[ms] from the generation of arc to the extinction of arc. When RCD was switched from off to on, arc was not observed. We repeated switching on and off 1000, 3000 and 6000 times. After repetition, the surface characteristics of contacts were taken by stereo microscope and Scanning Electron Microscope(SEM). From the scattering patterns analysis of arc and the analysis of deteriorated contacts, it could be applicable to the research of electric fire and arc suppression.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.145-154
• /
• 2005

러브파와 레일리파는 표면파로서 각 파가 가지는 분산특성을 활용하여 지반의 강성주상도를 파악할 수 있는 특징을 가지고 있다. 이 중 러브파는 한 방향에 대한 응력-변위만 고려하면 되기 때문에 수치적 모델링이 간단하다. 전파시에는 이론적으로 체적파의 영향 및 밀도의 변화가 없어 각 각의 물성치를 갖는 다층구조지반에서 적용성이 높다고 할 수 있다. 이러한 장점을 활용하여 최종적으로는 단파장에 유리한 러브파와 장파장에 유리한 레일리파의 분산정보를 같이 이용하여 동시역산해석을 할 수 있는 기법을 제안하고자 한다. 해석기법은 크게 3가지로 구성되는데, 러브파와 레일리파의 정모델링 해석을 위해 전달행렬법의 구성, 대상 지반의 시스템 결정을 위한 민감도행렬의 구성 그리고 역산해석기법인 Damped Least Square Solution (DLSS)이다. 동시역산의 방법은 민감도행렬을 구성할 때 레일리파와 러브파의 분산정보가 동시에 사용되며, 계산된 민감도행렬을 역산해석하여 지반의 전단파 주상도를 반복적으로 계산하게 된다. 동시역산해석의 목적은 각 파의 주파수 기여도가 다른 점을 활용함으로서 역산결과의 정확도와 수렴도를 향상하고자 함이다.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.381-401
• /
• 2014

This study proposes the accurate economic effect (employment inducement coefficient, hiring inducement coefficient, index of the sensitivity of dispersion, index of the power of dispersion, and ratio of value added) of Korea software industry by analyzing the inter-industry relation using the modified inter-industry table. Some previous studies related to the inter-industry analysis were reviewed and the key problems were identified. First, in the current inter-industry table publishedby the Bank of Korea, the output of software industry includes not only the output of pure software industry (package software and IT services) but also the output of non-software industry due to the misclassification of the industry. This causes the output to become bigger than the actual output of the software industry. Second, during rewriting the inter-industry table, the output is changing. The inter-industry table is the table in the form of rows and columns, which records the transactions of goods and services among industries which are required to continue the activities of each industry. Accordingly, if only an output of a specific industry is changed, the reliability of the table would be degraded because the table is prepared based on the relations with other industries. This possibly causes the economic effect coefficient to degrade reliability, over or under estimated. This study tries to correct these problems to get the more accurate economic effect of the software industry. First, to get the output of the pure software section only, the data from the Korea Electronics Association(KEA) was used in the inter-industry table. Second, to prevent the difference in the outputs during rewriting the inter-industry table, the difference between the output in the current inter-industry table and the output from KEA data was identified and then it was defined as the non-software section output for the analysis. The following results were obtained: The pure software section's economic effect coefficient was lower than the coefficient of non-software section. It comes from differenceof data to Bank of Korea and KEA. This study hasa signification from accurate economic effect of Korea software industry.

• 대한교통학회지
• /
• 제31권2호
• /
• pp.69-79
• /
• 2013

본 연구에서는 대기오염 물질이 대기 변화에 따라 주변 지역의 오염농도에 미치는 영향 분석에 대한 필요성과 구체적인 방법론을 제시하였다. 이에 대한 사례연구로서 경기도 포천지역 도로망을 대상으로 본 방법론을 적용하였다. 본 연구에서 제시한 방법론은 1) 교통에서 배출된 오염물질만을 고려한 확산 분석, 2) 교통에서 배출된 오염물질과 주변오염물질농도를 결합하여 분석하는 두 가지 분석 모형을 포함하고 있다. 이를 통해 교통에 의해 발생된 대기오염물질이 교통망과 교통망 주변지역에 미치는 영향을 분석하는데 유용 할 것으로 판단된다. 또한, 교통에 의해 발생된 대기오염원과 대기오염원이 인체에 미치는 영향을 본 분석에 근거하여 도로주변 고농도의 대기오염물질에 의한 위해성(危害性)을 평가하는데 유용할 것으로 판단된다.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.27-33
• /
• 2024

Al₂O₃ has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al₂O₃ powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al₂O₃ powders in practical applications. All powders exhibited α-Al₂O₃ as the main phase, with the presence of beta-phase Na₂O-11Al₂O₃ as the secondary phase. The highest Na⁺ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. High-concentration Al₂O₃ slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

• 한국환경과학회지
• /
• 제24권1호
• /
• pp.81-96
• /
• 2015

The characteristics of atmospheric dispersion of radioactive material (i.e. $^{137}Cs$) related to local wind patterns around the Kori nuclear power plant (KNPP) were studied using WRF/HYSPLIT model. The cluster analysis using observed winds from 28 weather stations during a year (2012) was performed in order to obtain representative local wind patterns. The cluster analysis identified eight local wind patterns (P1, P2, P3, P4-1, P4-2, P4-3, P4-4, P4-5) over the KNPP region. P1, P2 and P3 accounted for 14.5%, 27.0% and 14.5%, respectively. Both P1 and P2 are related to westerly/northwesterly synoptic flows in winter and P3 includes the Changma or typhoons days. The simulations of P1, P2 and P3 with high wind velocities and constant wind directions show that $^{137}Cs$ emitted from the KNPP during 0900~1400 LST (Local Standard Time) are dispersed to the east sea, southeast sea and southwestern inland, respectively. On the other hands, 5 sub-category of P4 have various local wind distributions under weak synoptic forcing and accounted for less than 10% of all. While the simulated $^{137}Cs$ for P4-2 is dispersed to southwest inland due to northeasterly flows, $^{137}Cs$ dispersed northward for the other patterns. The simulated average 137Cs concentrations of each local wind pattern are $564.1{\sim}1076.3Bqm^{-3}$. The highest average concentration appeared P4-4 due to dispersion in a narrow zone and weak wind environment. On the other hands, the lowest average concentration appeared P1 and P2 due to rapid dispersion to the sea. The simulated $^{137}Cs$ concentrations and dispersion locations of each local wind pattern are different according to the local wind conditions.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.14-20
• /
• 2015

A Large Eddy Simulation(LES) was performed for the prediction of unsteady dispersion behavior of hydrogen fluoride (HF). The HF leakage accident occurred at the Gumi fourth industrial complex was numerically investigated using the Fire Dynamics Simulator (FDS) based on the LES. The accident area was modeled three-dimensionally and time-varying boundary conditions for wind were adopted in the simulation for considering the realistic accident conditions. The Message Passing Interface (MPI) parallel computation technique was used to reduce the computational time. As a result, it was found that the present LES simulation could predict the unsteady dispersion features of HF near the accident area effectively. The dispersion behaviors of the leaked HF was much affected by the unsteady wind direction. The LES could predict the time variation of the HF concentration reasonably and give an useful information for the risk analysis while the prediction with the time-averaging concept of HF concentration had a limitation for the amount of HF concentration at specific location point. It was identified that the LES is very useful to predict the dispersion characteristics of hazardous chemicals.

• 한국콘텐츠학회논문지
• /
• 제7권1호
• /
• pp.124-130
• /
• 2007

네모 동축선은 동축선과 도파관을 연결하는 대표적인 천이구조이다. 또한 TEM 셀은 DUT의 EMC 측정을 위해 광범위하게 사용되는 소자이다. 네모 동축선과 TEM 셀의 동작을 정확히 예측하기 위해서는 네모 동축선과 TEM 셀의 분산관계 해석이 필수적이다. 본 논문에서는 TEM 모드에 대한 분석을 기반으로 고차 모드인 TE와 TM 모드에 대한 분산관계를 단순하면서도 정확한 방법을 이용해 유도한다. 모드정합법과 그린 함수를 이용하여 네모 동축선과 TEM 셀의 분산관계를 해석적으로 정확히 다룬다. 이를 위해 네모 동축선의 구조를 4개의 L블록으로 나누고 중첩의 원리를 사용하여 전체 전자장 표현식을 쉽게 구한다. 분산관계 수렴성을 파악하기 위해 수치해석을 행하고 FDTD 결과와 비교한다.