• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.431-434
• /
• 2003

신호처리 분야의 새로운 기법으로 제시된 웨이브렛 변환은 시간 및 주파수 국부성을 가지므로, 다양한 신호를 해석하는데 용이할 뿐만 아니라, 다중 해상도 해석이 가능하므로 최근 여러 분야에 응용되고 있다. 그리고, 두 개의 웨이브렛 기저가 힐버트 변환쌍을 형성하도록 설계될 때, 웨이브렛 쌍은 펄스 형태의 데이터 검출에서 기존의 DWT보다 우수한 성능을 나타낸다. 따라서, 본 연구에서는 절단된 계수 벡터에 의해 설계된 두 개의 dyadic 웨이브렛 기저를 사용하여, 임펄스 노이즈의 위치를 검출하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1157-1160
• /
• 1998

This paper describes the design of a block data flow architecture(BDFA) which implements 2-D discrete wavelet transform(DWT)/inverse discrete wavelet transform(IDWT) for real time image processing applications. The BDFA uses 2-D product separable filters for DWT/IDWT. It consists of an input module, a processor array, and an output module. It use both data partitioning and algorithm partitioning to achieve high efficiency and high throughput. The 2-D DWT/IDWT algorithm for 256$\times$256 lenna image has been simulated using IDL(Interactive Data Language). The 2-D array structured BDFA for the 2-D filter has been modeled and simulated using VHDL.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.132-140
• /
• 1997

This paper proposes systolic array architectures for compuataion of the 1-D and 2-D discrete wavelet transform (DWT). The proposed systolic array for compuataion of the 1-D DWT consists of L processing element (PE) arrays, where the PE array denotes the systolic array for computation of the one level DWT. The proposed PE array computes only the product terms that are required for further computation and the outputs of low and high frequency filters are computed in alternate clock cycles. Therefore, the proposed architecuter can compute the low and high frequency outputs using a single architecture. The proposed systolic array for computation of the 2-D DWT consists of two systolic array architectures for comutation of the 1-D DWT and memory unit. The required time and hardware cost of the proposed systolic arrays are comparable to those of the conventional architectures. However, the conventional architectures need extra processing units whereas the proposed architectures fo not. The proposed architectures can be applied to subband decomposition by simply changing the filter coefficients.

• 전기전자학회논문지
• /
• 제6권1호
• /
• pp.80-86
• /
• 2002

본 논문에서는 2차원 분할을 이용한 병렬 처리가 가능한 리프팅 스킴(lifting scheme) DWT(Discrete Wavelet Transform)를 구현하는 하드웨어 구조를 제안한다. 기존의 DWT 하드웨어 구조는 웨이블릿(Wavelet) 변환이 갖는 특성 때문에 병렬 처리 구조를 구현하는 데 있어서 메모리와 하드웨어 자원이 많이 필요하였다. 제안된 구조는 기존의 구조와 달리 데이터 흐름을 분석하여, 분할 과정을 2차원으로 수행하는 방법을 제안하였다. 이러한 2차원 분할 방법을 파이프라인 구조를 사용하여 병렬 처리의 효율을 증가 시켜 50% 정도의 출력 지연의 감소된 결과를 얻을 수 있었다. 또한 데이터 흐름의 분석과 출력 지연의 감소는 내부 메모리의 사용을 감소 시했으며, 리프팅 스킴의 특성을 이용하여 외부 메모리의 사용을 감소시키는 결과를 얻을 수 있다.

• Journal of information and communication convergence engineering
• /
• 제2권4호
• /
• pp.251-255
• /
• 2004

In this paper, we present a watermarking scheme based on the DWT (Discrete Wavelet Transform) and the ANN (Artificial Neural Network) to ensure the copyright protection of the digital images. The problem to embed watermark is not clear to select important coefficient in the watermarking. We used the RBF (Radial-Basis Function) to solve the problem. We didn't apply the whole wavelet coefficients, but applied to only the wavelet coefficients in the selected node. Using the ANN, although even the watermark casting process and watermark verification process are in public, nobody knows the location of embedding watermark except of authorized user. As the result, the watermark is good at the strength test-filtering, geometric transform and etc.

• 반도체디스플레이기술학회지
• /
• 제17권2호
• /
• pp.26-31
• /
• 2018

In this paper, surface defects and typical illumination mechanisms for steel plates are analyzed, and then optimum illumination mechanism is selected using discrete wavelet transform (DWT) synthetic images and discriminant measure (DM). The DWT synthetic images are generated using component images decomposed by Haar wavelet transform filter. The best synthetic image according to surface defects is determined using signal to noise ratio (SNR). The optimum illumination mechanism is selected by applying discriminant measure (DM) to the best synthetic images. The DM is applied using the tenengrad-euclidian function. The DM is evaluated as the degree of contrast using the defect boundary information. The performance of the optimum illumination mechanism is verified by quantitative data and intuitive image looks.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.99-106
• /
• 2005

In recent years, vision sensors are widely used to mobile robot for navigation or exploration. The analog signal transmission of visual data being used in this area, however, has some disadvantages including noise weakness in view of the data storage. A large amount of data also makes it difficult to use this method for a mobile robot. In this paper, a digital data compressing technology based on MPEG4 which substitutes for analog technology is proposed to overcome the disadvantages by using DWT(Discreate Wavelet Transform) instead of DCT(Discreate Cosine Transform). The TI Company's DSP chip, TMS320C6711, is used for the image encoder, and the performance of the proposed method is evaluated by PSNR(Peake Signal to Noise Rates), QP(Quantization Parameter) and bitrate.

• ETRI Journal
• /
• 제32권3호
• /
• pp.390-394
• /
• 2010

In this paper, we propose a new super-resolution technique based on interpolation of the high-frequency subband images obtained by discrete wavelet transform (DWT) and the input image. The proposed technique uses DWT to decompose an image into different subband images. Then the high-frequency subband images and the input low-resolution image have been interpolated, followed by combining all these images to generate a new super-resolved image by using inverse DWT. The proposed technique has been tested on Lena, Elaine, Pepper, and Baboon. The quantitative peak signal-to-noise ratio (PSNR) and visual results show the superiority of the proposed technique over the conventional and state-of-art image resolution enhancement techniques. For Lena's image, the PSNR is 7.93 dB higher than the bicubic interpolation.

• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.699-712
• /
• 2008

The effectiveness of wavelet transform in detecting delamination damages in multilayered composite beams and plates is studied here. The damaged composite beams and plates are modeled in finite element software ABAQUS and the first few mode shapes are obtained. The mode shapes of the damaged structures are then wavelet transformed. It is observed that the distribution of wavelet coefficients can identify the damage location of beams and plates by showing higher values of wavelet coefficients at the position of damage. The effectiveness of the method is studied for different boundary conditions, damage location and size for single as well as multiple delaminations in composite beams and plates. It is observed that both discrete wavelet transform (DWT) and continuous wavelet transform (CWT) can detect the presence and location of the damaged region from the mode shapes of the structures. DWT may be used to approximately evaluate the size of the delamination area, whereas, CWT is efficient to detect smaller delamination areas in composites.

• 융합신호처리학회논문지
• /
• 제15권1호
• /
• pp.1-8
• /
• 2014

Digital watermarking techniques are attracting attention as a proper solution to protect copyright for multimedia data. This paper proposes a new audio watermarking method based on Discrete Cosine Transformation (DCT) and Discrete Wavelet Transformation (DWT) for copyright protection. In our proposed watermarking method, the original audio is transformed into DCT domain and divided into two parts. Synchronization code is applied on the signal in first part and 2 levels DWT domain is applied on the signal in second part. The absolute value of DWT coefficient is divided into arbitrary number of segments and calculates the energy of each segment and middle peak. Watermarks are then embedded into each middle peak. Watermarks are extracted by performing the inverse operation of watermark embedding process. Experimental results show that the hidden watermark data is robust to re-sampling, low-pass filtering, re-quantization, MP3 compression, cropping, echo addition, delay, and pitch shifting, amplitude change. Performance analysis of the proposed scheme shows low error probability rates.