• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.229-241
• /
• 2008

In order to investigate stabilization effect on As-contaminated soils treated by zero-valent iron(ZVI) and industrial by-products, batch tests and column tests were carried out with As-contaminated soils collected from farmland around the abandoned mine site. In batch tests, ZVI and industrial by-products(blast furnace slag, steel refining slag and oyster shell powder) were used as treatment materials to reduce As. Industrial by-products were mixed with As-contaminated soils, in the ratio of 1%, 3%, 5% and 7% on the weight base of dried soil. After incubation, all samples showed the reduction of As concentration and it was expected that ZVI and steel refining slag were effective treatment materials to remove As among treatment materials used in batch test. In column tests, columns were made by acrylic with the dimension of diameter=10cm, height=100cm, thickness=1cm and these columns were filled with untreated soils and treated soils mixed with ZVI and steel refining slag(mixing ratio=3%). Distilled water was discharged into the columns with the velocity of 1 pore-volume/day. During test, pH, EC, Eh and As concentration were measured in the regular term(1 pore-volume). As a result, ZVI and steel refining slag were shown 93%, 62% reduction of As concentration respectively by comparison with untreated soils. Therefore, if ZVI and steel refining slag are used as treatment materials in As-contaminated soils, it is expected that the As concentration in soils is reduced effectively.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.620-624
• /
• 2003

LiCo$_{y}$Mn$_{2-y}$O$_4$ samples were synthesized by calcining a mixture of LiOH.$H_2O$, MnO$_2$ (CMD) and CoCO$_3$ calcining at 40$0^{\circ}C$ for 10 h and then calcining twice at 75$0^{\circ}C$ for 24 h in air with intermediate grinding. All the synthesized samples exhibited XRD patterns for the cubic spinel phase with a space group Fd(equation omitted)m. The electrochemical cells were charged and discharged for 30 cycles at a current density 600 $mutextrm{A}$/$\textrm{cm}^2$ between 3.5 and 4.3 V. As the value of y increases, the size of particles becomes more homogeneous. The first discharge capacity decreases as the value of y increases, its value for y=0.00 being 92.8 mAh/g. The LiMn$_2$O$_4$ exhibits much better cycling performance than that reported earlier. The cycling performance increases as the value of y increases. The efficiency of discharge capacity is 98.9％ for y=0.30. The larger lattice parameter for the smaller value of y is related to the larger discharge capacity. The more quantity of the intercalated and the deintercalated Li in the sample with the larger discharge capacity brings about the larger capacity fading rate.ate.

• Analytical Science and Technology
• /
• v.13 no.6
• /
• pp.693-698
• /
• 2000

The object of this series of experiments was aimed for the systematic and long-term radioactivity monitoring through indirect search of C-14 concentration level changes in the natural conditions around the operating nuclear facilities. The result of environmental radioactivity level through tree-ring analysis is increased after operating nuclear facilities and such a level can be proved to relate power generation closely. The measured result of ${\delta}^{13}C$ through the treatment of cellulose can be showed the level -30‰. This figure is very different from one which is measured the -17‰ of air sample by passive air sampling and -8‰ of air sample by active air sampling. And these differences can be assumed as isotope fractionation by photosynthesis, but the problem is more study as needed.

• Korean Journal of Materials Research
• /
• v.9 no.12
• /
• pp.1216-1221
• /
• 1999

GaN films were deposited on sapphire [$Al_2O_3(0001)$] substrates at relatively low temperature by MOCVD using N-atom source based on a Dielectric Barrier Discharged method. Ammonia gas($NH_3$is commonly used as an N-source to grow GaN films in conventional MOCVD process, and heating to high temperature is required to provide sufficient dissociation of $NH_3$. We used a dielectric barrier discharge method instead of $NH_3$ to grow GaN film relatively low temperature. DBD is a type of discharge, which have at least one dielectric material as a barrier between electrode. DBD is a type of controlled microarc that can be operated at relatively high gas pressure. Crystallinity and surface morphology depend on growth temperature and buffer layer growth. With the DBD-MOCVD method, wurtzite GaN which is dominated by the (0001) reflection was successfully grown on sapphire substrate even at $700^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.95-104
• /
• 2012

Due to current interest in creation of urban space and urban landscape, more emphasis has been placed on underground space development. With increasing number of underground power cables and its importance, a study of backfill materials for pipe is now imperative. Backfill materials require outstanding thermal characteristics since breakdown of cable insulation can be caused if heat generated from transmission of underground power cables had not been effectively discharged through backfill materials. Also, coal ash, which are industrial by-products, is being produced in high volume every year. Among them, ponded ash (PA) is not recycled and instead, mostly buried. Therefore in this study, thermal conductivity test based on mixture ratio (PA, ponded ash : FA, fly ash) was performed to evaluate the thermal conductivity characteristics of CLSM (controlled low strength materials) with coal ash. The results indicate that the mixture ratio (PA, ponded ash : FA, fly ash) of 80:20, water contents of 28~30%, and cement contents of 7-11% showed the highest conductivity at 0.796~0.884W/mK and thus, considered optimal in terms of recycling ponded ash (PA) as well as for maximizing utilization as backfill materials for pipe in underground.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.6 no.2
• /
• pp.117-122
• /
• 2008

Purpose: Surveys on poisoning usually involves intoxication rather than inhalation, skin contact, etc. Therefore, we examined the characteristics of patients who visited the emergency department in an industrial complex after acute industrial exposure to toxic materials. Methods: Medical records of patients exposed to toxic materials in the work places from April, 2006, to March, 2008, were analyzed retrospectively. Inhalation patients due to fire were excluded. Results: Subjects included 66 patients, with a mean age of $35.4{\pm}10.9$ years, mostly men (91%). Toxicity occurred in 51 patients (77%) by contact, 15 patients (23%) by inhalation, and none by oral ingestion. For toxic materials, 10 patients were exposed to hydrofluoric acid, 8 to hydrochloric acid, 7 to sodium hydroxide, 7 to metals, and others. The face and hands were the most frequent exposure site by contact. Most exposures were caused by accidents, with 29 cases (42%) exposed because of carelessness or not wearing protective equipment. Most complaints were pain on exposure site, but 7 of the inhalation patients complained of dyspnea. The majority of patients with contact exposure were discharged after wound care or observation. After inhalation exposure, 1 patient died and 5 patients were admitted to the intensive care unit. Conclusion: Major causes of workplace exposure were not wearing protective equipment or carelessness. Although contact exposures are usually benign, cautious observation and management are required in patients with inhalation exposure.

• Journal of ILASS-Korea
• /
• v.23 no.4
• /
• pp.192-204
• /
• 2018

In this study, a 3D CFD analysis method for the combustion process was established for a low calorific value syngas-diesel dual-fuel engine operating under very lean fuel-air mixture condition. Also, the accuracy of computational analysis was evaluated by comparing the experimental results with the computed ones. To simulate the combustion for the dual-fuel engine, a new dual-fuel chemical kinetics set was used that was constituted by merging two verified chemical kinetic sets: n-heptane (173 species) for diesel and Gri-mech 3.0 (53 species) for syngas. For dual-fuel mode operations, the early stage of combustion was dominated by the fuel burning inside or near the spray plume. After which, the flame propagated into the syngas in the piston bowl and then proceeded toward the syngas in the squish zone. With the baseline injection system and piston shape, a significant amount of unburned syngas was discharged. To solve this problem, effects of the injection parameters and piston shape on combustion characteristics were analyzed by calculation. The change in injection variables toward increasing the spray plume volume or the penetration length were effective to cause fast burning in the vicinity of TDC by widening the spatial distribution of diesel acting as a seed of auto-ignition. As a result, the unburned syngas fraction was reduced. Changing the piston shape with the shallow depth of the piston bowl and 20% squish area ratio had a significant effect on the combustion pattern and lessened the unburned syngas fraction by half.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.131-140
• /
• 2020

Air pollutants emitted from chimneys of coal-fired power plants are considered to be a major source of fine particulate matter in the atmosphere. In order to manage fine particle in the chimney of a coal-fired power plant, it is necessary to know the concentration of fine particle emitted in real time, but the current system is difficult. In this study, a real-time measurement system for chimney fine particle was developed, and measurements were performed on six coal-fired power plants. Through the measurements, the mass concentration distribution according to the particle size could be secured. All six chimneys showed bimodal distribution, and the count median diameters of each mode were 0.5 and 1.1 ㎛. In addition, it was compared with the gravimetric measurement method, and it was determined that the relative accuracy for PM10 was within 20%, and the value measured using the developed measuring instrument was reliable. Finally, three power plants were continuously measured for one month, and as a result of comparing the concentration of PM10 according to the amount of power generation, it was confirmed that the PM10 discharged from the chimney increased in the form of an exponential function according to the amount of power generation.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1179-1184
• /
• 2008

Commercial nanometer sized silver is widely used for its antibacterial effect; however, nanoparticles may also have ecotoxicological effects after being discharged into water. Nanometer sized silver can flow into aquatic environments, where it can exert a variety of physiologically effects in living organisms, including fish. The present study aimed to investigate the effect of nanometer sized silver on the development of zebrafish embryos, analyze the properties of commercial nanometer sized silver and define the toxicity relationship between embryogenesis and hatched flies. The commercial nanometer sized silver was analyzed in the $Ag^+$ ion form. The hatch rate decreased in the nano-silver exposed groups (10 and 20 ppt); furthermore, the hatched flies had an abnormal notochord, weak heart beat, damaged eyes and curved tail. The expression of the Sel N1 gene decreased in the nano-silver exposed groups, and the catalase activities of the exposed groups increased relative to those in the control group. Therefore, the $Ag^+$ ions in commercial nanometer sized silver could accumulate in aquatic environments and seriously damage the development of zebrafish embryos.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.165-176
• /
• 2003

Instead of existing cell phones, PDAs are observed as leading wireless Internet devices recently Numerous applications are developed by extended usage of PDAs and it should be installed appropriately according to devices. Furthermore, when battery is discharged, all data stored in RAM(Random Access Memory) becomes obsolete. So it should be recovered or reinstalled from flash memory, backup media or something. In this paper, we present an automatic application installation system(PAIS : PDA Automatic Installation System) to solve problems that users have to install applications by themselves whenever it is necessary. With this system, users feel comfortable by saving time and effort to install each applications and application development companies save cost needed to make materials illustrating installation process. Consequently PAIS may flourish wireless Internet business.