• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.286-288
• /
• 1990

This paper reports the characteristics of sparkover discharge in flowing air ranging from 0[m/s] to 30 [m/s] under the needle-needle gap. Flowing air duct of this investigation is circular tube. The important results obtained form this study are as follows. 1. the ratio of sparkover voltage to the Reynolds number decreases with increasing the Reynolds number. 2. The duration time of sparkover(t) decreases with increasing the Reynolds number. 3. the empirical equation obtained form this experiment is [ %]${\frac{Vs}{Re}}$ = A + $B{\varepsilon}^{C.Re}$ where A = 10.2 b = 125 c = -4.66 ${\times}$ $10^{-5}$

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.253-255
• /
• 2008

This paper gives a basic data of the surface discharge characteristics for epoxy resin in Dry-Air. Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. With the changing electrodes in same condition, we can obtain different creeping lengthes, breakdown voltages and dielectric strengths, respectively. Dielectric strengths of Needle to plane electrodes are more higher than the others. Breakdown voltage and dielectric strength increase as the thickness of epoxy resin and creeping strength increase.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.49-53
• /
• 1996

Corona discharges in air insulated electric power systems cause power loss, produce interfering electromagnetic radiation, and can indicate incipient failure. An understanding of corona discharges in air gap is clearly Important. The Wavelet transformation is an extended method of fourier transformation. The fourier method is a powerful tool for signal analysis, but it can't include information for time. However the wavelet transformation analysis can include on the information of time and frequencies at the same time. In this paper we apply the wavelet transformation to the corona signals in needle-plane air gap for the purpose of analysis of developing aspects of corona discharges. We analyzed the developing aspects of corona discharges, namely, corona discharge current, repetition rates, width of Pulse distribution region, pulseless region and frequencies distribution of corona discharge pulses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1808-1810
• /
• 2004

This paper describes the discharge characteristics of liquid $SF_6$ (-41$[^{\circ}]$, 1.7[atm]) and $LN_2$ for plane to plane, needle to plane, plane to needle and sphere to plane electrode with gap variations from 1[mm] to 12[mm]. From this result, the breakdown voltage was increased with increasing gap length. Especially, the formation of bubbles by evaporation was observed in spite of non-applying voltage source. A corona is created of the applying voltage from the bubbles on the electrodes applied voltage. We consider it equal mechanism of corona as void exists in solid insulator. The results of liquid $SF_6$ and $LN_2$ discharge characteristics were caused by bubble formed evaporation and applied electric field voltage. Corona was happened to weak bubble and was proceed to new bubble breakdown.

• 조명전기설비학회논문지
• /
• 제16권4호
• /
• pp.73-79
• /
• 2002

본 논문는 공기중 교류전압원을 이용하여 3종류의 전극부(침대평판전극, 평판대평판전극 및 구대평판전극부)에서 방전시 방사되는 방사전자파를 측정하고, 그 스펙트럼의 특이한 패턴을 나타냈다. 방사전자파의 측정은 스펙트럼분석기와 바이코니칼 안테나를 사용하여 VHF(30~230[MHz])대역에서 측정하였다. 방전개시전압영역일 때, 침대평판전극부인 경우에는 주파수 45, 70, 80[MHz] 대역에서, 평판대평판전극과 구대평판전극부인 경우에는 주파수40[MHz]에서 높은 전계강도를 나타내었다. 그러나 절연파괴전압영역일 때, 방사전자파의 주파수 스펙트럼분포는 전극의 형태에 따라 측정주파수 영역에서 차이를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1897-1899
• /
• 2000

This paper describes the frequency characteristics and the number of pulse of ultrasonic signals due to partial discharge occurred at each electrode. The defects which could occur in a transformer were simulated by using needle-plane electrode, IEC(b) electrode and void electrode. As a result, the dominant frequency of ultrasonic signals generated by corona in oil and partial discharge in void was hardly changed regardless with the applied voltage, but in case of surface discharge in oil, its dominant frequency moved to low frequency with the applied voltage. The increasing rate of pulse number per second was high in order of the surface discharge in oil, the partial discharge in void, the corona in oil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.100-103
• /
• 2004

In this paper, BP learning algorithm is studied to apply as a PD source classification in GIS specimens. For occurred partial discharge, three defected models are made; floating particle, surface discharge of spacer, needle to plane. And PD data for discrimination were acquired from PD detector. And these data making use of a computer-aided discharge analyser, statistical and other discharge parameters is calculated to discrimination between different models of discharge sources. And also these parameter is applied to classify PD sources by neural networks. Neural Networks has good recognition rate for three PD sources.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.83-89
• /
• 2013

In this paper, discharge characteristics of air in the vertical arrangement of three rods(dome-shaped, cylinder-shaped, and needle-shaped rod) and plane gap having propane flame on the plane electrode are examined under the application of a.c. and d.c. high-voltages. As the result of the experiment, flashover voltages in the presence of the flame are substantially lowered than those in the absence of flame, and relative a.c. flashover voltages in the dome-shaped, cylinder-shaped, and needle-shaped rod gaps are found 32.5%, 32.1%, and 26.4% respectively. The polarity effects with the d.c. voltages are shown, and flashover voltages in negative polarity are much lowered than those in positive one. The negative flashover voltages in the dome-shaped and cylinder-shaped gaps are found 18.3% and 18.7% respectively, but the positive ones are found 53.5% and 43.2% respectively. In the needle-shaped rod gaps, meanwhile, the flame is extinguished by corona wind, and the quenching voltages are found 28.4% under the application of a.c. voltages. The ion winds of corona and the reduction of air density are the main factors of flashover reduction owing to the flame in the case of a.c. voltages, but the electrifications of the positive ion by thermal ionization besides the above factors are remarkably found in the case of d.c. voltages.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.216-221
• /
• 1999

전력용 케이블은 전선로의 지중화 추세에 따라 사용이 증가하고 있다. 케이블 절연체의 경우 장기간의 전압인가에 의해 열화 및 절연파괴 된다. 전력용 케이블의 절연파괴시 발생하는 사회/경제적 문제는 매우 심각한 것으로 알려져 있다. 절연체의 열화에 영향을 주는 요인은 매우 복잡하지만 그중에서도 전기트리 열화에 의한 파괴는 비교적 두꺼운 고체 유전체인 경우에 절연파괴 사고의 주된 원인이 되고 있다. 전기트리의 개시나 진전시 부분방전이 발생하므로 부분방전의 검출에 의해 전기트리의 발생 및 진전 양상을 관측할 수 있고 부분방전의 해석에 의해 절연재료의 잔여 수명을 예측할 수 있다. 본 논문에서는 고전압 전력용 케이블 절연재로써 광범위하게 사용되고 있는 저밀도 폴리에틸렌 시편에서의 전기트리 진전 양상을 비파괴 진단 기법에 의하여 검출하고자 내부 부분방전을 관측/해석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.339-340
• /
• 2006

AC spark discharge voltage of SF6/CO2and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1~0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.