• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.671-690
• /
• 2010

The continuous growth of attacks in the Internet causes to generate a number of rules in security devices such as Intrusion Prevention Systems, firewalls, etc. Policy anomalies in security devices create security holes and prevent the system from determining quickly whether allow or deny a packet. Policy anomalies exist among the rules in multiple security devices as well as in a single security device. The solution for policy anomalies requires complex and complicated algorithms. In this paper, we propose a new method to remove policy anomalies in a single security device and avoid policy anomalies among the rules in distributed security devices. The proposed method classifies rules according to traffic direction and checks policy anomalies in each device. It is unnecessary to compare the rules for outgoing traffic with the rules for incoming traffic. Therefore, classifying rules by in-out traffic, the proposed method can reduce the number of rules to be compared up to a half. Instead of detecting policy anomalies in distributed security devices, one adopts the rules from others for avoiding anomaly. After removing policy anomalies in each device, other firewalls can keep the policy consistency without anomalies by adopting the rules of a trusted firewall. In addition, it blocks unnecessary traffic because a source side sends as much traffic as the destination side accepts. Also we explain another policy anomaly which can be found under a connection-oriented communication protocol.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.11a
• /
• pp.45-53
• /
• 2005

A novel method for evaluating the anisotropy of the deterministic features in a stochastic 2D data is introduced. The ability of the wavelet transform for the identification of the abrupt discontinuities could be used to characterize the boundary of the deterministic area in a 2D stochastic data, such as flocs in paper structure. The one-dimensional wavelet transform with a small-scale range in MD and CD could quantify the amount of the edge in both directions, depending on the intensity of each floc. The flocs that are aligned in the MD direction result in a higher value of local wavelet energy in the CD direction. Therefore, the ratio of the total wavelet energy in CD and MD directions can be used as a new anisotropy index. This index is a measure of the floc-orientation and can provide an excellent tool to obtain the orientation distribution and the major oriented angle of flocs. Various simulated images and real stochastic data such as local gloss variation of printed image and formation image, have been tested and the results show this analysis method is very reliable to measure the anisotropy of the deterministic features.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.209-222
• /
• 1995

To mitigate the development gap between urban and rural area, the government has implemented project planning as the Rural Integrated Development in each Gun level since 1986. On account of shortage of the development fund, the government had changed the Gun level development into Myeon level development so called the Rural Central Settlement Zone Development. The government had started nine pilot projects throughout Korea from 1990. This study is aimed at identifing problems that found in the course of implementation of the projects and recommending the new direction of the successful implementation of the projects in the future. The problems and directions found in the cource of project implementation were as follows: 1. Project implementation by investment priority considering economic and financial rate of return should be made. 2. Objective project planning should be made. 3. Equal allocation of the limited investment fund by group interest and egoism should be prohibited. 4. Enforcement of special man power should be taken into account. 5. Unification of the diversified existing terms and conditions of loans for house construction and improvement. 6. Road development oriented budget allocation should be improved. 7. Sufficient development fund should be procured considering the present rate of sufficiency of the project cost as 36%. 8. Sufficient supply of the credit loans for improvement of living environment of the farmers should be realized. 9. Rational implementation planning in connection with farm household income source development should be made.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.631-642
• /
• 2009

The sun is a useful reference direction because of its brightness relative to other astronomical objects and its relatively small apparent radius as viewed by spacecrafts near the Earth. Most satellites use solar power as a source of energy, and so need to make sure that solar panels are oriented correctly with respect to the sun. Also, some satellites have sensitive instruments that must not be exposed to direct sunlight. For all these reasons, sun sensors are important components in spacecraft attitude determination and control systems. To minimize components and structural mass, some components have multiple purposes. The solar cells will provide power and also be used as coarse sun sensors. A coarse Sun sensor is a low-cost attitude determination sensor suitable for a wide range of space missions. The sensor measures the sun angle in two orthogonal axes. The Sun sensor measures the sun angle in both azimuth and elevation. This paper presents the development of a model to determine the attitude of a small cube-shaped satellite in space relative to the sun's direction. This sensor helps small cube-shaped Pico satellites to perform accurate attitude determination without requiring additional hardware.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.175-182
• /
• 2011

The purpose of this article is to suggest what is the desirable direction of economic relationship between Korea and China. The economic relationship between countries is based on how the present network is. As the economic relationship between countries grows, the network between countries will expand. In the past, the economic relationship between Korea and China is cooperative one from the viewpoint of international division of labor. Korean industries was focused on the value-added and mid-advanced technology products, while Chinese was focused on the labor-intensive products. As the China's economy grows for more than thirty years, there is a great change in China's economic policies and environment. China's industry structure is moving from the labor-intensive industry to technology-oriented industry. China's exports to the global market is increasing very fast, and China's domestic market is also growing. The change in Chinese industries' structure bring about severe competition in the global market. The expanding China's domestic market is also good opportunity as the new market in the world. The change in China's industrial structure needs for Korea to establish the 'New Network" between two countries. Korea has to grab the new opportunities in the China's domestic market and find new cooperative network with the products and industries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.124-131
• /
• 2007

This paper presents a block loss recovery technique for the image block data corrupted by transmission losses through the employment of fine directional interpolation (FDI). The proposed algorithm introduces a spatial direction vector (SDV). The SDVs are extracted from the edge information of the neighboring image data. Subsequently, the SDVs are adaptively applied to interpolate lost pixels on a pixel-by-pixel basis. This approach improves the capability to more reliably recover high-detailed contents in the corrupted block. Experimental results demonstrate that the FDI method performs better as compared to previous techniques.

• Earthquakes and Structures
• /
• v.8 no.1
• /
• pp.185-204
• /
• 2015

This study investigates the impact of the earthquake incident angle on the structural demand and the influence of ground motion selection and scaling methods on seismic directionality effects. The structural demand produced by Non-Linear Time-History Analyses (NLTHA) varies with the seismic input incidence angle. The seismic directionality effects are evaluated by subjecting four three-dimensional reinforced concrete structures to different scaled and un-scaled records oriented along nine incidence angles, whose values range between 0 and 180 degrees, with an increment of 22.5 degrees. The results show that NLTHAs performed applying the ground motion records along the principal axes underestimate the structural demand prediction, especially when plan-irregular structures are analyzed. The ground motion records generate the highest demand when applied along the lowest strength structural direction and a high energy content of the records increases the structural demand corresponding to this direction. The seismic directionality impact on structural demand is particularly important for irregular buildings subjected to un-scaled accelerograms. However, the orientation effects are much lower if spectrum-compatible combinations of scaled records are used. In both cases, irregular structures should be analyzed first with pushover analyses in order to identify the weaker structural directions and then with NLTHAs for different incidence angles.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.726-731
• /
• 2011

The present work shows how the flexural displacement-induced fracture strength of silicon devices, whose back surfaces have wafer grinding-induced scratch marks, depends on the crystallographic orientation. Experimental results indicate that silicon devices with scratch marks parallel to their lateral direction (i.e. reference axis in this work) are very susceptible to flexural fracture, as compared to devices with marks which deviated from the direction. The 3-point bending test shows that the fracture strength of silicon devices having marks which are oriented away from the reference axis is 2.6 times higher than that of devices with marks parallel to the axis. It was particularly interesting to see that silicon devices with identical preferred marks even reveal different fracture strengths, depending on whether the marks are involved in specific crystal planes such as {111} or {011}, called cleavage planes. This work demonstrates that silicon devices with the reference axis-aligned scratch marks not existing on such cleavage planes can have higher fracture strength approximately 20% higher than those existing on the planes.

• Coupled systems mechanics
• /
• v.12 no.2
• /
• pp.183-197
• /
• 2023

Scarce research has been published on crack propagation fracture of flywheels manufactured with carbon fiber-reinforced polymers. The present work deals with a calculation method to determine the conditions for which a crack propagates in the axial direction of the flywheel. The assumptions are: flywheels made with just a single thick ply or ply clustering laminates, oriented following the hoop direction; a single crack is analyzed in the plane defined by the hoop and axial directions; the crack starts close to one of the free edges; its axial length is initially large enough so that its tip is far away from that free edge, and the crack expands the entire circumferential perimeter and keeps its concentric position. The developed method provides information for a good design of flywheels. It is concluded that a fracture-based crack propagation criterion generally occurs at a lower speed than a stress-based criterion. Also, that the evolution of failure with thickness using the fracture criterion is exponential, demonstrating that thin flywheels are relatively not sensitive to crack propagation, whereas thick ones are very prone.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.107-123
• /
• 2020

The purpose of this paper is to analyze the Granger Causality relations between Korean FDI and exports in Vietnam using time-series from 2005 to 2019. Using 15-industry semi-annual data of Korean FDI and exports toward Vietnam, the Granger Causality Tests were conducted. Var and VEC models were decided after unit-root and cointegration tests of variables. Findings and implications of the empirical tests are as follows. First, unexpectedly FDI did not Grange-cause exports only in one direction. In two industries, food & beverage and medical & chemical products, there were Granger causality relations in both directions. In eight industries including print, publishig, pulp & paper, exports did Grange-cause FDI. In the rest of five industries including automative & trailer industry, there were no Granger Causality relation in both directions. Second, we presume that the both direction-causality relations are desirable phenomenon for Korea. Because Korean FDI and exports are increasing at the same time. On the other hand, substitution relationship between Korea's exports and FDI occur in the industry that exports did Grange-cause FDI. Finally, more in-depth researches considering Vietnam's consumer demand and the oriented characteristics of FDI are needed. The results of this research will contribute to understand structural patterns of FDI and exports in Vietnam and to make investment and export decisions.