• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.912-918
• /
• 2014

In this paper, a VHF band multi channel phase discriminator for direction finding equipment using tripple baseline interferometer technique is proposed. In order to measure simultaneously phase difference between IF(Intermediate Frequency) signals of the direction finding equipment, phase discriminator was designed to have parallel structure with multi channel, the phase correlator of phase discriminator was designed with I, Q mixer for reducing number of components. And digital LUT(Look Up Table) was applied for compensating error of phase discriminator due to phase unbalance of RF components. The measured phase accuracy of fabricated phase discriminator was 2 degree RMS(Root Mean Square) at 30 dB SNR condition, which is superior to the phase accuracy of conventional product.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.320-323
• /
• 2018

Herein, an ultrawideband spinning direction finding (DF) antenna was designed and fabricated for airborne applications. The proposed antenna is designed by dividing the low-band (UHF - L band) and high-band (S - Ka band) antennas to cover the ultrawideband frequency range (UHF - Ka band). For the high-band antenna, an LPDA antenna fed offset-parabolic-reflector antenna is applied. In the low-band antenna, two LPDA antenna elements are arrayed in front of the reflector of the high-band antenna without increasing to the full antenna size. The low- and high-band gains of the fabricated antenna were measured as 8.76 dBi and 24.55 dBi on average, respectively. The antenna was fabricated with the dimensions of 437 mm in diameter and 358 mm in height. Consequently, we confirmed that the designed antenna is appropriate for the spinning DF antenna in terms of the affordable size for installing on an airplane, as well as the high gain and narrow beamwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.4908-4922
• /
• 2019

The popularization of smartphones in recent years has created a rich ground for online-to-offline (O2O) services based on location information. In the process of finding user locations in O2O services, BLE (Bluetooth Low Energy) beacons are widely used because the beacons are economical in many ways. The current BLE method does not specify the direction of user movement, but adding that information could enrich the user experience for various O2O services. This paper proposes a method that identifies the user movement direction through data analysis on data sets generated by a pair of BLE beacons. Also we demonstrate its implementation with examples of services that need the direction information of users in order to show the feasibility of the method proposed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.170-179
• /
• 2007

This paper introduces the optimal disposition of direction finder using EM(Electro-magnetic) wave propagation analysis which is based on LR(Longley-Rice) propagation model and the characteristics of direction finder, emitter and terrain. Initial model is simulated and modified to minimize propagation error as a result of the field trials. Proposed analysis used line-of-sight analysis and mountain-top extraction algorithm to optimize the disposition in the assigned area and the result can be displayed in the 3D map in order of the percentage coverage for direction finding possibility area.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.55-63
• /
• 1994

A decision-theretic concept is introduced to investigate whether targets of interest in array sensor systems are present at some steering direction or not. The solutions to this problem are described as a set of discrete numbers 0 or 1 corresponding to the direction under consideration. This coded number representation is transplanted in the optimisation technique based on the Hopfield neural network, which may provide an easy understanding of determining the direction of arrival (DOA) of sources. Difficulties encountered in using the conventional state schemes of Hopfield neural network models are addressed and their related issues are raised. To deal with them, an idea that a neuron that decreases more energy difference for its state change of 0 to 1can have higher priority in the order of state transition than others is introduced. This does not only lead to an new state update scheme but also opens a different story in comparison to previous work. To cast the perspectives of the proposed approach and illustrate its effectiveness in source direction finding in array sensor system. simulation results and related discussions are presented in this paper.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.206-209
• /
• 1993

The main purpose of this paper is to verify the effectiveness of a high resolution direction finding method, so called the‘averaged MUSIC’. This method uses a new sample array covariance matrix that consists of diagonal components obtained by taking averages of the diagonal component values of the sample covariance matrix for the MUSIC. The paper shows that the proposed method performs higher resolved direction-of-arrival estimation and better resolution probability than the MUSIC in such cases as low signal-to-noise ratio, when the number of sensors used is finite, based on the statistical analysis.

• The Journal of Korea Robotics Society
• /
• v.6 no.4
• /
• pp.334-343
• /
• 2011

This paper presents a new approach for mobile robot heading detection using MEMS Gyro north finding method in the indoor environment. Based on this, the robot heading angle measurement scheme is proposed; improved north finding theory and algorithm are also explained. Several approaches are applied to confirm system's precision and effectiveness. In order to find out the heading angle, a single axis MEMS gyroscope to sense the angle between the robot heading direction and the north is used. To reach enough estimation accuracy and reduce detection time, the least square method (LSM) for the signal fitting and parameter estimation is applied. Through a turn-table, we setup a carouseling system to decrease the substantial bias effect on gyroscope's heading angle. For the evaluation of the proposed method, this system is implemented to the Pioneer robot platform. The performance and heading error are analyzed after the test. From the simulation and experimental results, system's accuracy, usefulness and adaptability are shown.

• Journal of Korean Society of Archives and Records Management
• /
• v.14 no.1
• /
• pp.75-100
• /
• 2014

Many archives, including the National Archives of Korea, use online finding aids. However, in many aspects, they need improvement. In this study, with focus on the National Archives of Korea, the online finding aids of the National Archives of Australia (NAA), The National Archives (TNA) of United Kingdom, and the National Archives and Records Administration (NARA) of the United States were analyzed. Focus group interview was administered to users of the archives, identifying the pros and cons of online finding aids of NAA, TNA, and NARA. Based on the results, various improvement and development directions are suggested, including aspects on overall functions and hierarchical search, search options and subject search, representing search results, and archival contents services.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.170-171
• /
• 2015

Resource procurement and material handling are considered as a significant part of construction project especially in large or tall building construction site. There are multiple variables that must be considered in a construction site during finishing work such as movement of materials, equipments, and workers. Therefore, it is difficult for construction workers to find the material handling path solely by intuition. The aim of this study is to propose a real-time path finding model suitable for complicated logistics flow in the field. The model explores the optimal transport path of finishing material with its basis on optimization algorithm, and it determines the direction of the Smart Sign. The proposed model is expected to be utilized for planning of efficient finishing material handling.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.51-58
• /
• 2000

Dynamic relaxation method is a shape finding analysis method for flexible structures by introducing the dynamic equilibrium equation. However, it is difficult for shape finding to estimate the most appropriate values for the mass and damping on each shape because the values are random one. In this study, the unit mass, the unit damping and the principal direction stiffness are utilized to avoid the random values, and the Newmarks assumption is introduced during the dynamic analysis. By introducing variant time increment method presented, the convergence time is reduced, that is, it can be reduced the total times for analysis.