• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.461-472
• /
• 2022

Natural and anthropogenic factors cause forest types to continuously change. Since the ratio of forest area by forest type is important information for identifying the characteristics of national forest resources, an accurate understanding of the prospect of forest type change is required. The study aim was to use National Forest Inventory (NFI) time-series data to understand the characteristics of forest type change and to estimate future prospects of nationwide forest type change. We used forest type change information from the fifth and seventh NFI datasets, climate, topography, forest stand, and disturbance variables related to forest type change to analyze trends and characteristics of forest type change. The results showed that the forests in Korea are changing in the direction of decreasing coniferous forests and increasing mixed and broadleaf forests. The forest sites that were changing from coniferous to mixed forests or from mixed to broadleaf forests were mainly located in wet topographic environments and climatic conditions. The forest type changes occurred more frequently in sites with high disturbance potential (high temperature, young or sparse forest stands, and non-forest areas). We used a climate change scenario (RCP 8.5) to establish a forest type change model (SVM) to predict future changes. During the 40-year period from 2015 to 2055, the SVM predicted that coniferous forests will decrease from 38.1% to 28.5%, broadleaf forests will increase from 34.2% to 38.8%, and mixed forests will increase from 27.7% to 32.7%. These results can be used as basic data for establishing future forest management strategies.

• Journal of Science Education
• /
• v.39 no.3
• /
• pp.358-375
• /
• 2015

The purposes of this study were to investigate the value, necessity and legitimacy of STEAM Education and to propose practical approaching methods for STEAM Education to be applicable in Korea through a variety of literature review, case studies and collecting suggestions from domestic and international educational experts. The research questions are as follows: (1) To investigate the perception, understanding and recognitions of domestic and foreign professionals in STEAM education. (2) To analyze policy implications for an improvement in STEAM. The following aspects of STEAM were found to be challenges in our current STEAM policy after analyzing multiple questionnaires with the professionals and case studies including their experiences, understanding, supports and directions of the policy from the governments. The results indicate that (1) there was a lack of precise and conceptual understanding of STEAM in respect to experience. Training sessions for teachers in this field to help transform their perception is necessary. Development of practical programs with an easy access is also required. It is important to get the aims of related educational activities recognized by the professionals and established standards for an evaluation. The experts perceived that a theme-based learning is the most preferred and effective approaching method and the programs that develop creative thinking and learning applicable to practice are required to promote. (2) The results indicate that there was a lack of programs and inducements for supporting outstanding STEAM educators. It is shown that making an appropriate environment for STEAM education takes the first priority before training numbers of teachers unilaterally, thus securing enough budget seems critical. The professionals also emphasize on developing specialized teaching materials that include diverse inter-related subjects such as science technology, engineering, arts and humanities and social science with diverse viewpoints and advanced technology. This work requires a STEAM network for teachers to link up and share their materials, documents and experiences. It is necessary to get corporations, universities, and research centers participated in the network. (3) With respect to direction, it is necessary to propose policy that makes STEAM education ordinary and more practical in the present education system. The professionals have recommended training sessions that help develop creative thinking and amalgamative problem-solving techniques. They require reducing the workload of teachers and changing teachers' perspectives towards STEAM. They further urge a tight cooperation between departments of the government related with STEAM.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.363-384
• /
• 2008

This study aims at improving Korea's competitiveness in port logistics through marketing strategy with integrating the conceptual approach into the empirical one and combining both the oldest military treatise and the newest evaluating model in social science that was applied by the HFP(hierarchical fuzzy process) model enhanced by the KJ method. The empirical results of this study show Busan in the middle among subject ports. At present, Korea plays a reciprocal role in the port market in East Asia, but in the medium- and long-term, Korea's ports will vie together with most major ports in the East Asian region. A descriptive investigation shows that Korea's developing tasks in port logistics must be considered in the context of the direction for developing port policies, the necessity of expanding port facilities in the capital region, securing the sufficient traffic volume through the establishment of the hinterland linking system and its positive utilization, and reforming the direction for developing the global logistics through increased port competitiveness. In the short- and medium-term, Korea must use the opportunity factor of 'Growth and open door policy of China' as a geoeconomic advantage and to utilize Korea's ports as a gate to Chinese foreign trade. With the rise of China's economy, China also plays a significant role in both port and airport markets. Hence, the linking system between the two must be established to meet the expanding traffic volume, especially in the capital area. Moreover, it is necessary for Korea to secure port logistics through the establishment of the hinterland linking system and its positive utilization. The great accomplishment of this paper is to present strategies to increase Korea's port competitiveness in the rapidly changing environments of world logistics with the focus on both the oldest military strategic treatise and the newest empirical method in social science. In order to reinforce this study, it needs further compensative research because the evaluation structure could be subdivided with more extensive and precise criteria.

• Korean Security Journal
• /
• no.36
• /
• pp.349-386
• /
• 2013

This research analyzes and evaluates The Korean Security Industry Law(TKSIL) putting the regulation of the present government about the private security industry. It nowadays becomes the important axis of the police services offered in the aspect of 'the national life safety' in connection with 'the materialization of society which is safe from the crime'. TKSIL is one of the national administration strategies which Park Gun-hye government aims on supervision policy. After seeking out the core values of the private security industrial policy which sets up in order to approach the national life safety which Park Gun-hye government aims, we make some assessments of this revised security industry law systematically. Particularly all keynote of policy about the private security of the police tried to be confirmed and the desirable direction of policy tries to be presented as to the security industry law application and real operation. In the site of organized civil complaint, the revised security industry law was revised as the direction which intensifies the administrative regulation as to the partial regulation such as it established the reason of the introduction of the arrangement license system. And grounds for disqualification of security instructor and guard, and rules of punishment is intensified order to intercept previously illegal and violent act of the security company etc. However it has the feature that it accomplishes 'the law principle(principle of statute)' the substantial portion through the effort of them changing a lot the content for the form of the law when being the clauses of the fundamental human rights limit, although it has been prescribed in "the security industry law enforcement ordinance" or "the security industry law enforced regulation". The security industry law revised this time brought from the change of the sharp policy through the revision of 17 clauses or new establishment. It can divide into 4 categorizes. (1) strictness of punishment in the site of organized civil complaint (2) Intensification of throwing out for the violation person in the private security business market time-limitedly (3) Intensification of the legal guide supervision power of police (4) upstream of the capital, name tag attachment under compulsion and the limit about other equipment use etc. Essentially "the security industry law" cannot help regulating the national interference of the private security and regulation with this content. However as to this interference and regulation, the limit has to be possible within reasonable range. As the history proved, excessive regulation by the country is not only due to bring the distortion of the security system of nation but also provoke national social cost. It can't be disregards ever that it premises the harmony which appropriate as well as reasonable in the socio-economic dimension for drawing the best combination that all things which get the compulsory education, it limits the person providing the private security service to the corporation, or it limits to the certificate of qualification holder are the ultimate for 'the safety of the national life'.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.161-169
• /
• 2008

Since measuring the size of kidney with sonography becomes an important index for diagnosis, treatment, and prognostic prediction in kidney disease, the accurate measurement and evaluation on this are clinically very important. Accordingly, the purpose of this study was to increase reproducibility and objectivity in measuring the size of kidney by enumerating factors that have an impact for measurement. It targeted 44 adults in Korea at the age of 21-27. It measured in order for both kidneys to be seen most largely while changing a subject-examiner's position in a state of fasting for 8 hours and a transducer's approaching direction. It compared a size of kidney by measuring, respectively, with the same method in 30 minutes and in 1 hour after drinking water in 700-1,000cc. In case of the lateral approach scan in decubitus position, the average length of the kidney both to the right and the left and the deviation of measurement to be the largest. In NPO(None Per Oral) state, the average length in the right kidney was 10.19cm, and the average length in the left kidney was 10.33cm. In 60 minutes after taking moisture, the average length in the right kidney was 10.94cm, and the average length in the left kidney was 11.13cm. In comparing the average length of the kidney in NPO state and its average length in 60 minutes after taking moisture, the size swelled by 7.3% for the length in the right kidney and by 7.7% in the left, thereby having been indicated to be statistically significant(P<0.003). The measurement in a size of kidney by using ultrasound may be measured differently depending on a patient's state of taking moisture and a transducer's approaching direction. It is thought that when the measurement in a size of kidney is especially important clinically, the intake and intake time in moisture need to be considered and that measuring with the posterior approach in prone position is a good method aiming to increase reproducibility in measuring length of the kidney.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.131-150
• /
• 2011

The purpose of this study vocational courses in general high schools in each city in order to operate efficiently. Provinces operating status and the general high school vocational courses through the regular high school vocational courses siltae analysis to identify operational problems, and that is to derive ways to improve. Operating in the desired direction, the typical high school vocational courses ilbango select students that meet the purpose of operating as one that students admit you need the correct promotion and career guidance and vocational courses ilbango teachers of vocational courses is operating correctly recognize the purpose and students with career guidance and vocational courses so that you can operate effectively at: Provincial Office-wide need to conduct a systematic study. Vocational courses also target students ilbango sosokgyo (wonjeokgyo) to be completed in the course stated in the plan for the school and the need to practice, and professional students ilbango by configuring a separate class is most preferable to operate. If the person is prime target, with each region run by creating a class needs to definitely consider. Entrusted to the agency's key performance improvements in order to improve the employment rate in the direction of promotional materials for the students selected to take advantage of college enrollment than the employment data for the students and their parents ilbango vocational courses for the purpose and intent is necessary to provide accurate information In addition, the employment rate is relatively low industrial (information) to install the school department employment, and employment representatives (industry-academia co-coordinator), and by placing career paths and industries to ensure the needs of industry, including working conditions and students who wish adjusting to the role, and industrial college (2 years), industrial (information) through the school's agreement to the aggressive promotional schemes seonchwieop hujinhak. Getting the need to encourage. Vocational courses ilbango in the new and the abolition, rather than the case of some popular course when you are away from work and there, so if the course-changing industry, new or repealed to reflect the demands of social work and careful review of how to connect carefully to decide by. Commissioned a systematic quality management in education, in terms of industry (information) schools and public vocational training institutions or private vocational school is better than school. However, 16 cities across the country. Also only five of the major cities around the school has industry information. Ilbango vocational courses at the expected continued demand. Degrees, the operation in terms of comparative advantage in many ways the school's new industry information is necessary to consider.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.65-83
• /
• 1994

Sevaral problems of administrative area sysem in Korea have been brought up for a long time. Because its frame has remained since Chosun and Japanese colonial period in spite of changing local administrative environment in accordance with rapid industrialization and urbanization. Recent reform of city (Shi)- county (Gun) integration is derived from this argument. But problems which permeate deeply overall system cannot be solved by partial reorganization of Shi-Gun. They may be rationalized only through the reform of the whole system. The aims of this study are to analyze problems of administrative area system entirelr and to discuss the direction of its reform from that point of view. Major problems of administrative area system are summed up into the followings. Firstly, it is found that administrative hierarchies are too many levels. Contemporary administrative hierarchical structure is 4 levels: regional autonomous government (Tukpyolshi, Jik'halshi, Do), local autonomous government (Shi, Gun), two leveis of auxiliary administrative area (Up, Myun and Ri). These hierarchies were established in late period of Chosun which transportation was undeveloped and residential activity space was confined. But today developing transportion and expanding sphere of life don't need administrative hierarchical structurl with many levels. Besides developing administrative technology reduces administrative space by degrees. Many levels of contemporary administrative hierarchical structure are main factor of administrative inefficency, discording with settlement system. Second problem is that Tukpyolshi and Jik'halshi - cities under direct control of the central government as metropolitan area - underbounded cities. Underbounded city discomforts residential life and increases external elects of local pulic services. Especially this problem is Seoul, Pusan and Daegu. Third problem is that Do-areas are mostly two larger in integrating into single sphere of life. In fact each of them consistes of two or three sphere of life. Fourth Problem is metropolitan government system that central city is seperated from complementary area, i.e. Do. It brings about weakening the economic force of Do. Fifth problem is that several cities divided single sphere of life. It is main factor of finantial inefficency and facing difficult regional administration. Finally necessity of rural parish (Myun.) is diminished gradually with higher order center oriented activty of rural residents. First of all administrative area system should corresponds with substantial sphere of life in order to solve these problems. Followings are some key directions this study proposes on the reform of administrative area system from that standpoint. 1. Principles of reorgnization -- integration of central dty with complementary area. -- correspondence of administrative hierarchical structure with settlement system. -- correspondence of boundary of administrative area with sphere of life. 2. Reform strategy -- Jik'halshi is integrated with Do and is under the contol of Do. -- Small Seoul shi (city) which have special functions as captal is demarcated in Seoul tukpyolshi and 22 autonomous distrcts of Seoul tukpyolshi is integrated into 3-4 cities. -- Neighboring cities (Shies) in single sphere of life are intrgrated into single city (Shj). -- Myun and Ri are abolished in rural region and new unit of local administrative area on the basis of lowest order sphere of life into which 3-4 Ries are integrated replaces them.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.35-40
• /
• 2003

I. Purpose Confirming an error to be able to break out in a method to move couch manually while operator sees the skin marks on patient in case of curing head who got 2 targets adjoined, so we analyze coordinates price of couch, evaluate reproducibility and precision of change movements between targets. II. Materials and Methods In radiotherapy, for confirming errors in manual movements by operators by exchanging between two targets to treat patient head, we read coordinates price(vertical, longitudinal, lateral three directions of couch) shown on a monitor of LINAC( CL 2100, Varian, USA) in order to evaluate accuracy about the length that moved in time for moving couch manually. After reading movement length of coordinates recorded in three directions of all treatment, we compared distance between targets recorded in RTP(Pinnacle, ADAC, USA) with reading coordinates price of couch, setting actually done the same patient for ten times, coordinates were recorded, treated for evaluating averages and degrees of errors and standard deviations. III. Results In method to confirm skin marks of patient by operators' view and to move couch manually, average standard deviations of movements between two targets are vertical 1.4mm, longitudinal 0.9mm, lateral 2.2mm in each direction. As for the error in straight dimension, it is about 3.6mm averages and 5.1mm maximum. The average of errors in each directions was vertical 1mm, longitudinal 0.7mm, lateral 2.7mm. The greatest error broke out in lateral direction with $25\%$ of all cases ; to exceed an error average. IV. Conclusions If operators moved manually couch for changing target points, errors about 3.6mm average degrees occur. It is important that operators confirm the errors prices of actual couch coordinates for asking a correct movement between the targets adjoined each other ; in case of treatment demanding high precision like 3D conformal therapy or IMRT. Therefore, if we apply couch coordinates confirmation to reproducibility and to precision evaluation of treatment, it's expected that we can execute high-quality radiotherapy.

• Journal of Radiation Protection and Research
• /
• v.25 no.1
• /
• pp.31-36
• /
• 2000

In radiotherapy, it may happen to radiate surrounding normal tissue because of inconsistent field size by changing patient position during treatment. We are going to analyze errors reduced by using immobilization device with Electonic portal imaging device(EPID) in this study. We had treated the twenty-one patients in pelvic region with 10 MV X-ray from Aug. 1998 to Aug. 1999 at Chungnam National University Hospital. All patients were treated at supine position during treatment. They were separated to two groups, 11 patients without device and 10 patients with immobilization device. We used styrofoam for immobilization device and measured the errors of anterior direction for x, y axis and lateral direction for z, y axis from simulation film to EPID image using matching technique. For no immobilization device group, the mean deviation values of x axis and y axis are 0.19 mm. 0.48 mm, respectively and the standard deviations of systematic deviation are 2.38 mm, 2.19 mm, respectively and of random deviation for x axis and y axis are 1.92 mm. 1.29 mm, respectively. The mean deviation values of z axis and y axis are -3.61 mm. 2.07 mm, respectively and the standard deviations of systematic deviation are 3.20 mm, 2.29 mm, respectively and of random deviation for z axis and y axis are 2.73 mm. 1.62 mm, respectively. For immobilization device group, the mean deviation values of x axis and y axis are 0.71 mm. -1.07 mm, respectively and the standard deviations of systematic deviation are 1.80 mm, 2.26 mm, respectively and of random deviation for x axis and y axis are 1.56 mm. 1.27 mm, respectively. The mean deviation values of z axis and y axis are -1.76 mm. 1.08 mm, respectively and the standard deviations of systematic deviation are 1.87 mm, 2.83 mm, respectively and of random deviation for x axis and y axis are 1.68 mm, 1.65 mm, respectively. Because of reducing random and systematic error using immobilization device, we had obtained good reproducibility of patient setup during treatment so that we recommend the use of immobilization device in pelvic region of radiation treatment.