• 대한전자공학회논문지TC
• /
• 제48권6호
• /
• pp.22-27
• /
• 2011

본 논문은 직접 대역 확산(Direct sequence spread spectrum : DS-SS) 시스템에서 적응형 임계값을 적용하여 초기 동기 성능을 향상 시키는 알고리즘을 제안한다. 제안된 알고리즘은 탐색 모드(search mode) 이전에 프리덤프 모드(pre-dump mode)를 추가하고, 상관 에너지를 이용해 탐색 모드와 확인 모드(verification mode)의 임계값을 결정한다. 이를 통해 확인 모드뿐만 아니라 탐색 모드에서까지 거부 성능(rejection performance)을 향상시킬 수 있다. 제안된 방법은 기존 기술과 비교할 때 하드웨어 증가 없이 평균 코드 획득 시간(mean code acquisition time)을 약 40% 단축시킬 수 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.602-614
• /
• 2016

It is necessary to develop an efficient optimization technique to perform optimum designs which have given design spaces, discrete design values and several design goals. As optimization techniques, direct search method and stochastic search method are widely used in designing of ship structures. The merit of the direct search method is to search the optimum points rapidly by considering the search direction, step size and convergence limit. And the merit of the stochastic search method is to obtain the global optimum points well by spreading points randomly entire the design spaces. In this paper, Pareto Strategy (PS) multi-objective function method is developed by considering the search direction based on Pareto optimal points, the step size, the convergence limit and the random number generation. The success points between just before and current Pareto optimal points are considered. PS method can also apply to the single objective function problems, and can consider the discrete design variables such as plate thickness, longitudinal space, web height and web space. The optimum design results are compared with existing Random Search (RS) multi-objective function method and Evolutionary Strategy (ES) multi-objective function method by performing the optimum designs of double bottom structure and double hull tanker which have discrete design values. Its superiority and effectiveness are shown by comparing the optimum results with those of RS method and ES method.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.346-353
• /
• 2005

In this paper, the tension of assembly stay cable connected with massive anchorage block was calculated through back analysis of in-situ frequencies measured from a stadium structure. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method can search the optimal tension without regard to the initial ones and has a rapid convergence rate. To verify the reliability of back analysis, Tension formulas proposed by Zui et al. and Shimada were used. Tensions estimated by three methods are compared with the design tension, and are in a reasonable agreement with an error of more or less than 15%. Therefore, it is shown that back analysis applied in this paper is appropriate for estimation of cable tension force.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.435-440
• /
• 2004

In this paper, the tension of assembly stay cable connected with massive anchorage block was calculated through back analysis of in-situ frequencies measured from a stadium structure. Direct approach to back analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method can search the optimal tension without regard to the initial ones and has a rapid convergence rate. To verify the reliability of back analysis, Tension formulas proposed by Zui et al. and Shimada were used. Tensions estimated by three methods are compared with the design tension, and are in a reasonable agreement with an error of more or less than 15%. Therefore, it is shown that back analysis applied in this paper is appropriate for estimation of cable tension force.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.175-182
• /
• 2005

It is necessary to develop an efficient optimization technique to optimize the engineering structures which have given design spaces, discrete design values and several design goals. As optimization techniques, direct search method and stochastic search method are widely used in designing of engineering structures. The merit of the direct search method is to search the optimum points rapidly by considering the search direction, step size and convergence limit. And the merit of the stochastic search method is to obtain the global optimum points by spreading point randomly entire the design spaces. In this paper, a Pareto optimal based multi-objective function method (PMOFM) is developed by considering the search direction based on Pareto optimal points, step size, convergence limit and random search generation . The PMOFM can also apply to the single objective function problems, and can consider the discrete design variables such as discrete plate thickness and discrete stiffener spaces. The design results are compared with existing Evolutionary Strategies (ES) method by performing the design of double bottom structures which have discrete plate thickness and discrete stiffener spaces.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.161-171
• /
• 2015

Alternative binary offset carrier (AltBOC) signals can be approximated by four synchronized direct sequence spread spectrum (DSSS) signals, each pair of which is a quadrature phase shift keyed (QPSK) signal at a different frequency. Therefore, depending on the strength of an incoming AltBOC signal, an acquisition technique can reduce the mean acquisition time (MAT) by searching the four DSSS signals asynchronously; the search for each of the four DSSS signals can start at one of the evenly separated hypotheses on the two-dimensional hypothesis space. And detection sensitivity can be improved by multiple levels when different numbers of search results for the same hypothesis are combined. In this paper, we propose a fast AltBOC acquisition technique that has an asynchronous search strategy and efficiently utilizes the output of the four search results to increase the sensitivity level when sensitivity improvement is needed. We provide a complete theoretical analysis and demonstrate with numerous Monte Carlo simulations that the MAT of the proposed technique is much smaller than conventional AltBOC acquisition techniques.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.107-121
• /
• 1996

An optimization procedure is proposed to determine the optimal stacking sequence on the buckling of laminated composite plates with midplane symmetry under various loading conditions. Classical lamination theory is used for the determination of the critical buckling load of simply supported angle-ply laminates. Analysis is performed by the Galerkin method and Rayleigh-Ritz method. The approximate solution of buckling is replaced by the algorithms that produce generalized eigenvalue problem. Direct search technique is employed to solve the optimization problem effectively. A series of computations is carried out for plates having different aspect ratios, different load ratios and different number of lay-ups.

• 한국통신학회논문지
• /
• 제31권7A호
• /
• pp.682-688
• /
• 2006

본 논문에서는 파일롯 채널(pilot channel)이 존재하는 직접확산 코드분할 다중접속 방식(DS-CDMA)에서 PN 코드의 초기 동기획득 성능을 개선하기 위해 연판정 기법을 사용하는 방법을 제안한다. 본 논문에서 제안하는 연판정 기법을 하이브리드 동기획득 알고리듬에 적용하고, 평균 동기획득 시간 측면에서 분석한다. 분석을 위해, 제안된 방식의 수학적 모델을 제시하고, IMT-2000 채널모델에서 시뮬레이션을 수행한다. 수식적인 분석 결과, 제안된 방식이 한 쌍의 임계치를 사용하는 기존 방식에 비해 평균 동기획득 시간에서 약 0.2초 내지 0.4초 정도의 성능향상을 가져오는 것을 보여준다. 이것은 연판정 기법이 기존의 경판정 기법의 사용으로 인한 성능열화를 보상함으로써 생기는 이득이라고 볼 수 있다.

• 한국도서관정보학회지
• /
• 제26권
• /
• pp.365-400
• /
• 1997

The interface design for most present query-base model of OPAC systems does not include the function to implement an iterative feedback process till the user arrives at satisfied search results through the interaction with the system. Also, the interface doesn't provide the help function for a user to select pertinent search terms. To formulate a query at the present OPAC system, a user should learn a set of syntax different from system to system. All of above mentioned things make an end-user feel difficult to utilize an OPAC system effectively. This experimental system is attempted to alleviate a few limitations of the present OPAC system by a n.0, pplying the direct-manipulation technique as well as the feedback principle. First, this system makes it unnecessary for a user to learn some syntax for query formulation by providing option buttons for access points. Second, this system makes it possible for a user to decide whether each displayed record is relevant or not, and for keywords included in the relevant records to be automatically stored in order to be used for later feedback. Third, in this system, the keywords stored in [sayongja yongeu bogyanham] can be deleted if unnecessary or can selected as search terms for a query expansion as well as a query modification. Fourth, in this system, after inputting the original query, the feedback process can be proceed without coming back to the previous search step until a user becomes satisfied with the search results. In conclusion, the searching behaviors of heterogeneous users should be continuously observed, analysed, and studied, the findings of which should be integrated into the design for the interface of the OPAC system.

• 한방재활의학과학회지
• /
• 제21권2호
• /
• pp.171-188
• /
• 2011

Objectives : The aim of this study is to analyze the actual investigation and classification of osteopathic manipulation by investigation of the various literature of the inside and outside of the country, and to present the application plan of osteopathy in chuna manual therapy for meridian sinew system. Methods : I referred to the domestic and foreign books about osteopathy and chiropractic. In order to investigate domestic dissertations, I searched 4 Korean medical databases and 4 Korean medical journals of osteopathy. Search terms used were osteopathy, osteopathic, fascia, proprioreceptor, mechanoreceptor, muscle spindle, golgi tendon organ, osteopathic manipulation technics. And I classified all the searched studies into principle and region and etc. In order to investigate foreign dissertations, I search 'NCBI pubmed'. Search terms used were osteopathy, osteopathic technique, osteopathic manipulative technique. Results : 1. Osteopathy do not regard the systems which compose the human body in individual territory, but regard whole. It is diagnosis, prevention and medicine which treats 2. Osteopathic manipulation techniques are classified into direct techniques, indirect techniques, and compound techniques. 3. Osteopathic manipulation techniques are classified into fascia, muscle, ligament-joint in applied region. 4. I could search clinical cases in domestic and foreign study. I found cases about myofascial release technique(MFR), postisometric relaxation(PIR), proprioceptive neuromuscular fascilitation(PNF), muscle energy technique(MET), joint mobilization in domestic studies, and strain-counterstrain technique(SCS), MET, AK in foreign studies. Conclusions : Osteopathic manipulation techniques can be used in diagnosis and treatment of meridian muscle theory, because osteopathy and the oriental medicine have many similarities in theoretical background. So osteopathic manipulation technique can be useful in oriental medicine treatment techniques.