• Title/Summary/Keyword: Direct production cost

검색결과 172건 처리시간 0.029초

경관보전직접지불제 작물의 생산비 실증분석 (An Empirical Analysis on the Production Cost of Landscape Crops in the Direct Payment Program for Rural Landscape Conservation)

  • 김광남;김미영;이형순
    • 농촌계획
    • /
    • 제16권3호
    • /
    • pp.19-26
    • /
    • 2010
  • The purpose of this paper is to evaluate optimum rate of payment and to [md the new advanced direction for the program for rural landscape conservation. We used direct evaluation method for income and production costs. According to the survey, we had done from 41 complexes(farmers) joined this program, the average production cost of landscape crops of type1 is calculated at 178,582 won per 10a and 111,517 won as type2. If the classification of crop type is adjusted, the problem formulated is improved to make possible support at the current payment rate.

벼 직파재배 노동력 투입 및 에너지 효율성 비교 (Low-Input and Energy Efficiency of Direct Seeding Method in Rice)

  • 이호진;서준한;이정삼;정영상;박정근
    • 한국작물학회지
    • /
    • 제41권1호
    • /
    • pp.115-122
    • /
    • 1996
  • 노동력부족이 심화되는 농촌현실에서 이앙을 하지 않는 벼직파재배가 점차 확대되고 있다. 본 연구에서는 건답과 담수직파재배를 실시하고 기존의 이앙재배와 수량성, 노동생산성 및 수익성을 비교하여 영농노력을 절감하고 경영비용을 저하시킬 수 있는 가능성을 검토하여 직파의 적부를 평가하였다. 다수성을 진속하면서 경영을 개선하기 위하여 농용자재의 적정투입과 생력화로서 영농노력을 절감하고 경영비용을 저하시켜 벼농사의 경영채산성을 확립 하고자 하였다. 직파재배는 무효분얼이 많이 발생하여 유효경비율이 50%에 불과하였고 출수기는 약 9일이 지연되었으나 현미수량은 이앙과 차이가 없이 455kg/10a(건답), 480kg/10a(담수)을 생산하였다. 노동시간투입은 이앙에 비하여 17%(건답), 28%(담수)씩 감소시켰고 생산비소요는 20%(건답), 32%(담수)를 절감하였고 농용에너지 투입은 건답은 약 5% 감소시켰으나 담수는 3% 증가되었다. 담수재배가 건답보다 생력화와 생산성에서 보다 효과적이었다. 직파재배는 본답기간이 연장되어 비료와 제초제의 증시가 필요하였고 앞으로 이들 보조에너지들의 절감과 효율성을 높이는 기술이 개발되어야 하겠다.

  • PDF

철골 공장가공의 생산성 및 공장간접비율 실태분석 (Analysis of the Productivity and Indirect Cost Rates Estimation in the Steel Plant)

  • 김경원;안방률;태용호;허영기
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 춘계 학술논문 발표대회
    • /
    • pp.333-336
    • /
    • 2012
  • In modern Construction Industry, as accumulation of capital and improvement of technology skills, buildings are becoming higher and more enormous, also the portion of steel works has been increasing. In addition, it is necessary to predict the optimum level of construction cost in a reasonable way. The composition of construction is direct construction cost, indirect construction cost and so on. However, it is not enough to study about indirect construction cost rather than direct construction cost. In this study, the state of productivity and indirect construction cost are analyzed in the steel production. As a result, the productivity and ratio of indirect cost in steel plant by inserted per 1ton are suggested.

  • PDF

Economic analysis of thorium extraction from monazite

  • Salehuddin, Ahmad Hayaton Jamely Mohd;Ismail, Aznan Fazli;Bahri, Che Nor Aniza Che Zainul;Aziman, Eli Syafiqah
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.631-640
    • /
    • 2019
  • Thorium ($^{232}Th$) is four times more abundant than uranium in nature and has become a new important source of energy in the future. This is due to the ability of thorium to undergo the bombardment of neutron to produce uranium-233 ($^{233}U$). The aim of this study is to investigate the production cost of thorium oxide ($ThO_2$) resulted from the thorium extraction process. Four main parameters were studied which include raw material and chemical cost, total capital investment, direct cost and indirect cost. These parameters were justified to obtain the final production cost for the thorium extraction process. The result showed that the raw material costs were $63,126.00 - $104,120.77 (0.5 ton), $126,252.00 - $178,241.53 (1.0 ton), and $1,262,520.00 - $1,782,415.33 (10.0 tons). The total installed equipment and total cost investment were estimated to be approximately $11,542,984.10 and $13,274,431.715 respectively. Hence, the total costs for producing 1 kg $ThO_2$ were $6829.79 - $6911.78, $3540.95 - $3592.94, and $501.18 - $553.17 for 0.5, 1.0, and 10.0 tons respectively. The result concluded that with higher mass production, the cost of 1 kg $ThO_2$ would be reduced which in this scenario, the lowest production cost was $$501.18kg^{-1}$-$$553.17kg^{-1}$ for 10.0 tons of $ThO_2$ production.

질병의 사회.경제적 비용 추계 (The Socioeconomic Cost of Diseases in Korea)

  • 고숙자;정영호
    • Journal of Preventive Medicine and Public Health
    • /
    • 제39권6호
    • /
    • pp.499-504
    • /
    • 2006
  • Objectives : The aim of the study was to estimate the annual socioeconomic cost of diseases in Korea. Methods : We estimate both the direct and indirect costs of diseases in Korea during 2003 using a prevalence-based approach. The direct cost estimates included medical expenditures, traffic costs and caregiver's cost, and the indirect costs, representing the loss of production, included lost workdays due to illness and lost earnings due to premature death, which were estimated based on the human capital theory. The cost estimates were reported at three different discount rates (0, 3 and 5%). Results : The cost of diseases in Korea during 2003 was 38.4 trillion won based on 0% discount rate. This estimate represents approximately 5.3% of GDP The direct and indirect costs were estimated to be 22.5 trillion (58.5% of total cost) and 15.9 trillion won (41.5%), respectively. It was also found that the cost for those aged $40\sim49$ accounted for the largest proportion (21.7%) in relation to age groups. The cost of diseases for males was 23.5% higher than that for females. For major diseases, the total socioeconomic costs were 16.0, 13.4, 11.3 and 11.19% for neoplasms, and diseases of the digestive, respiratory and circulatory systems, respectively. Conclusions : This study can be expected to provide valuable information for determining intervention and funding priorities, and for planning health policies.

Water cost analysis of different membrane distillation process configurations for brackish water desalination

  • Saleh, Jehad M;Ali, Emad M.;Orfi, Jamel A;Najib, Abdullah M
    • Membrane and Water Treatment
    • /
    • 제11권5호
    • /
    • pp.363-374
    • /
    • 2020
  • Membrane distillation (MD) is a process used for water desalination. However, its commercialization is still hindered by its increased specific cost of production. In this work, several process configurations comprising Direct Contact and Permeate Gap distillation membrane units (PGMD/DCMD) were investigated to maximize the production rate and consequently reduce the specific water cost. The analysis was based on a cost model and an experimentally validated MD model. It was revealed that the best achievable water cost was approximately 5.1 $/㎥ with a production rate of 8000 ㎥/y. This cost can be further decreased to approximately 2 $/㎥ only if the heating and cooling energies are free of cost. Therefore, it is necessary to decrease the MD capital investment to produce pure water at economical prices.

간섭현상을 고려한 생산/재고 정책의 시뮬레이션 분석 (A Simulation Analysis of Producton/Inventory Policy with Interference)

  • 박회룡;최진영
    • 산업경영시스템학회지
    • /
    • 제18권35호
    • /
    • pp.131-138
    • /
    • 1995
  • For the purpose of the reduction of tile cost, a production/inventory model including the interference phenomenon was developed. By investigating the cause and the characteristics of the direct/indirect cost due to the interference phenomenon, a strategy for suitable production was developed. The developed model was quantitatively validated using an existing-EPQ model and the SIMAN package was used to simulate and animate the model. Consequently, it was presented that the total operating cost of the system could be decreased with tile proposed model.

  • PDF

철골 공장제작의 간접비율 도출 및 영향요인 분석 (Indirect Cost Rates and Influence Factors of Steel Factory)

  • 태용호;허영기;김경원;안방률
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.180-181
    • /
    • 2013
  • In order to draw indirect cost rates, theories of indirect cost were investigated, and recent field data were collected from steel factories. As a result, it was found that the ratio of indirect labor productivity compared to the direct labor ratio was approximately 17% and the ratio of indirect cost compared to direct cost was approximately 93%. Furthermore, 'The economy of construction industry' and 'size of steel factory' were found to be influence factors of the indirect cost ratio.

  • PDF

태양광 발전 연계 수전해 시스템의 경제성 분석 (Techno-Economic Analysis of Water Electrolysis System Connected with Photovoltaic Power Generation)

  • 황순철;박진남
    • 한국수소및신에너지학회논문집
    • /
    • 제32권6호
    • /
    • pp.477-482
    • /
    • 2021
  • Hydrogen production, hydrogen production cost, and utilization rate were calculated assuming four cases of hydrogen production system in combination of photovoltaic power generation (PV), water electrolysis system (WE), battery energy storage system (BESS), and power grid. In the case of using the PV and WE in direct connection, the smaller the capacity of the WE, the higher the capacity factor rate and the lower the hydrogen production cost. When PV and WE are directly connected, hydrogen production occurs intermittently according to time zones and seasons. In addition to the connection of PV and WE, if BESS and power grid connection are added, the capacity factor of WE can be 100%, and stable hydrogen production is possible. If BESS is additionally installed, hydrogen production cost increases due to increase in Capital Expenditures, and Operating Expenditure also increases slightly due to charging and discharging loss. Even in a hydrogen production system that connects PV and WE, linking with power grid is advantageous in terms of stable hydrogen production and improvement of capacity factor.

Development of Direct-Wet-Rice-Seedling Machines in Korea

  • Rhee, Joong-Young;Lee, Chong-Ho-
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
    • /
    • pp.256-266
    • /
    • 1993
  • History , achievement and future of direct-wet-rice-seeding technique in Korea and problems encountered in on-farming research were introduced. Some farmers are very eager to lower production cost and save labor. Their effort results in several direct-wet-seeding methods and seeding machines. The design problems and improvement points related to the direct -wet-rice-seeding machines were drawn out of field test.

  • PDF