• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.410-414
• /
• 2004

The MODIS Land Rapid Response System (RRS) has been developed to provide rapid access to MODIS data globally, with initial emphasis on 250 m color composite imagery and active fire data. Fire detection is based on a contextual algorithm that exploits the strong emission of mid-infrared radiation from fires. This algorithm examines each pixel of the MODIS swath, and ultimately assigns to each one of the following classes: missing data, cloud, water, non-fire, fire, or unknown. In this paper, we introduce the MODIS Rapid Response System established at the Korea Aerospace Research Institute (KARI) and present some application results for Korea using the direct broadcast data acquired at KARI ground station.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.1077-1088
• /
• 1996

In this paper, we propose a new method to analyze the performance degradation by timing jitters in the receivers of intensity modulation/direct detection digital optical communication systems where pulse-shaping filters are used to minimize intersymbol interference. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the receiver performance. Using the proposed anlaytical method, we derive an analytic equation for approximated power penalty due to timing itters and obtain an exact power penalty by numerical analyses. Assuming Gaussian or uniform probability density function for timing jitters, we also show that assumption of Gaussian distribution for timing jitters yields more performance degration than that of uniform distribution.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.183-187
• /
• 2002

In this paper, the effects of encoder fault and current sensor fault in direct torque controlled induction motor drives are analyzed. On the basis of the analyzed results, a observer based fault detection and isolation scheme is presented. To verify the performance of proposed algorithms, the speed control system is designed for induction motor and evaluated by experimental study. Experimental results various type of sensor faults show the detection and isolation performance of the SFDIS and the applicability of this scheme to fault tolerant control system design.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.411-414
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PT layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PT layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PT layer of c-axial orientation rained thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PT layer were measured, too.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.815-819
• /
• 1998

The silicon-nirtide membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PRO($PbTiO_3$ ) layer for a IR detection was coated on the membrane and its characteristics were measured. The a attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer were eliminated through the method of bonding/etching of silicon wafer. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by the PTO layer were measured, too.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권1호
• /
• pp.28-32
• /
• 2003

In this paper, we have studied the in-situ end point detection (EPD) for direct chemical mechanical polishing (CMP) of shallow trench isolation (STI) structures without the reverse moat etch process. In this case, we applied a high selectivity $1n (HSS) that improves the silicon oxide removal rate and maximizes oxide to nitride selectivity Quite reproducible EPD results were obtained, and the wafer-to-wafer thickness variation was significantly reduced compared with the conventional predetermined polishing time method without EPD. Therefore, it is possible to achieve a global planarization without the complicated reverse moat etch process. As a result, the STI-CMP process can be simplified and improved using the new EPD method.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• 센서학회지
• /
• 제20권1호
• /
• pp.35-39
• /
• 2011

A disposable electrochemical immunosensor system has been developed for the detection of herbicide in aqueous samples. Disposable screen printed carbon electrodes(SPCE) were used as basic electrodes and an enzyme, horseradish peroxidase (HRP), and anti-herbicide antibodies was immobilised on to the working electrode of SPCE by using avidin-biotin coupling reactions. An herbicide-glucose oxidase conjugates have been used for the competitive immunoreaction with sample herbicides. The enzymatic reaction between the conjugated glucose oxidase and glucose added generates hydrogen peroxide, which was reduced by the peroxidase immobilised. The latter process caused an electrical current change, due to direct re-reduction of peroxidase by a direct electron transfer mechanism, which was measured to determine the herbicides in the sample. The optimal operational condition was found to be: $20\;{\mu}gl-1$ deglycosylated avidin loading to the working electrode and working potential +50 mV vs. Ag/AgCl. The total assay time was 15 min after sample addition. The detection limits for herbicides, atrazine and simazine, were found to be 3 ppb and 10 ppb, respectively.

• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.199-203
• /
• 2010

A mobile direct detection Doppler LIDAR based on molecular backscattering for measurement of wind in the stratosphere has been developed in Hefei, China. First, the principle of wind measurement with direct detection Doppler LIDAR is presented. Then the configuration of the LIDAR system is described. Finally, the primary experimental results are provided and analyzed. The results indicate that the detection range of the designed Doppler LIDAR reached 50 km altitude, and there is good consistency between the molecular Doppler wind LIDAR(DWL) and the wind profile radar(WPR) in the low troposphere.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.447-450
• /
• 2009

본 논문에서는 2PAM(binary pulse-antipodal modulation) DS(direct-sequence) UWB(ultra-wideband) 시스템을 V-BLAST(vertical bell lab layered space-time) 구조를 사용하는 MIMO(multiple input multiple output) 시스템에 적용하여 실내 무선 채널 환경에서 고속 데이터 전송률을 달성하고자 한다. 이러한 2PAM DS UWB MIMO 시스템의 BER 성능과 송수신 안테나의 차원과의 관계가 논의된다. 또한, UWB-MIMO 시스템의 수신기에서는 ZF(zero-forcing), ZF-OSIC(ordered successive interference cancellation), MMSE(minimum-mean-square-error), MMSE-OSIC, ML(maximum likelihood)과 같은 다양한 MIMO(multiple input multiple output)와 같은 다양한 MIMO 검출기법이 비교, 분석된다.