• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4397-4403
• /
• 2024

The multi-dimensional thermal-hydraulic phenomena in the downcomer of advanced pressurized water reactor with direct vessel injection system are the key points for the safety analysis during a loss of coolant accident. In order to improve the accuracy of LOCUST code for the predictions of thermal-hydraulic phenomena in downcomer region, some newly correlations have been implemented into LOCUST code. The wall friction model of LOCUST code was modified based on the correlations which developed by Yang. The interfacial friction models in LOCUST code have been modified as Hibiki-Ishii correlations. In addition, in order to simulate the upward flow of recirculation flow in downcomer region, the Kinoshita-Hibiki correlations have been also implemented into LOCUST code for better simulating the recirculation flow in downcomer region. The modified code was validated with experimental data of DOBO facility. Five tests of DOBO facility have been calculated by LOCUST, and the calculated axial void fraction distributions have been compared with the measurements. The results show that the modified LOCUST with new correlations of distribution parameter and drift velocity shows better accuracy than the original code. The deviations of the modified LOCUST code are less than the original code and are almost within ±20 %.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.98-107
• /
• 2007

For high-dimensional pattern recognition, such as face classification, the small number of training samples leads to the Small Sample Size problem when the number of pattern samples is smaller than the number of dimensionality. Recently, various LDA-extensions have been developed, including LDA, PCA+LDA, and Direct-LDA, to address the problem. This paper proposes a method of improving the classification efficiency by increasing the number of (sub)-classes through pre-clustering a training set prior to the execution of Direct-LDA. In LDA (or Direct-LDA), since the number of classes of the training set puts a limit to the dimensionality to be reduced, it is increased to the number of sub-classes that is obtained through clustering so that the classification performance of LDA-extensions can be improved. In other words, the eigen space of the training set consists of the range space and the null space, and the dimensionality of the range space increases as the number of classes increases. Therefore, when constructing the transformation matrix, through minimizing the null space, the loss of discriminatve information resulted from this space can be minimized. Experimental results for the artificial data of X-OR samples as well as the bench mark face databases of AT&T and Yale demonstrate that the classification efficiency of the proposed method could be improved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.752-758
• /
• 1997

Urea, which is the major nitrogenous fertilizer used in Korea, has been used inefficiently in direct-seeding on dry soil by farmers. This study was conducted to investigate changes in concentrations of basal N within soil layers and its loss during early stage of rice growth. Urea fertilizer was applied in the rates of 7, 5.25, 3.5, 1.75, 0kg- N /10a under direct-seeded rice in dry paddy soil. The concentrations of ammonium and nitrate were determined in soil samples with different depths during period from seeding to the 3rd leaf stage. Futhermore, N leaching was measured in lysimeter designed with pot in greenhouse. ${NH_4}^+ \; and\; {NO_3}^-$ adsorption by soil increased with increasing concentration of added urea and decreased as deeper in soil layers. ${NH_4}^＋$ concentration reached its peak at 7 days after urea application (DAA) and disappeared almostly at 14 DAA. ${NO_3}^-$ reached its peak at 10 DAA and decreased slowly until 14 DAA. ${NO_3}^-$N leaching started next day after urea application and completed until 11 DAA. We concluded that most of basal N applied to direct-seeded paddy was lost by leaching and not useful for rice plant which was in stage of germination. It is urgent need to develop new nitrogen application method for direct-seeding rice on dry soil.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.43-49
• /
• 2010

Direct printing technology is an attractive metallization method, which has become immerging as "Green technology" to the conventional photolithography, on account of low cost, simple process and environment-friendliness. In order to commercialize the printed electronics in industry, it is essential to evaluate the electrical properties of conductive circuits using direct printing technology. In this contribution, we focused on the electrical characteristics of inkjet-printed circuits. A Cu nanoink was inkjet-printed onto a Bisaleimide triazine(BT) substrate with parallel transmission line(PTL) and coplanar waveguide(CPW) type, then was sintered at $250^{\circ}C$ for 30 min. We calculated the resistivity of printed circuits through direct current resistance by the measurement of I-V curve: the resistivity was approximately 0.558 ${\mu}{\Omega}{\cdot}cm$ which is about 3.3 times that of bulk Cu. Cascade's probe system in the frequency range from 0 to 30 GHz were employed to measure the Scattering parameter(S-parameter) with or without a gap between the substrate and the probe station chuck. The result of measured S-parameter showed that all printed circuits had over 5 dB of return loss in the entire frequency range. In the curve of insertion loss, $S_{21}$, showed that the PTL type circuits had better transmission of radio frequency (RF) than CPW type.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1156-1163
• /
• 2006

This paper presents an ultra wideband(UWB) direct conversion mixer for IEEE 802.15.3a applications with simulation and measurement results. Since the direct conversion mixing causes dc-offset and even-order distortion, the proposed mixer adopts an anti-parallel diode pairs(APDPs) to solve these problems. The proposed mixer consists of an in-phase wilkinson power divider over $3.1{\sim}4.8GHz$, a wideband $45^{\circ}$ power divider over $1.5{\sim}2.4GHz$, and miniatured band pass filters(BPFs) for RF-LO isolations. The conversion loss is optimized with impedance matchings between APDPs and wideband components. The measured mixer shows the conversion loss of 13.5 dB, input third-order intercept-point($IIP_3$) of 7 dBm, and 1-dB gam compression point($P_{1dB}$) of -4 dBm. Quadrature(I/Q) outputs have the magnitude difference of about 1 dB and phase difference of ${\pm}3^{\circ}$.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.4
• /
• pp.251-260
• /
• 2009

Objectives : To estimate the annual socioeconomic costs of stroke in Korea in 2005 from a societal perspective. Methods : We identified those 20 years or older who had at least one national health insurance (NHI) claims record with a primary or a secondary diagnosis of stroke (ICD-10 codes: I60-I69, G45) in 2005. Direct medical costs of the stroke were measured from the NHI claims records. Direct non-medical costs were estimated as transportation costs incurred when visiting the hospitals. Indirect costs were defined as patients and caregivers productivity loss associated with office visits or hospitalization. Also, the costs of productivity loss due to premature death from stroke were calculated. Results : A total of 882,143 stroke patients were identified with prevalence for treatment of stroke at 2.44%. The total cost for the treatment of stroke in the nation was estimated to be 3,737 billion Korean won (KRW) which included direct costs at 1,130 billion KRW and indirect costs at 2,606 billion KRW. The per-capita cost of stroke was 3 million KRW for men and 2 million KRW for women. The total national spending for hemorrhagic and ischemic stroke was 1,323 billion KRW and 1,553 billion KRW, respectively, which together consisted of 77.0% of the total cost for stroke. Costs per patient for hemorrhagic and ischemic stroke were estimated at 6 million KRW and 2 million KRW, respectively. Conclusions : Stroke is a leading public health problem in Korea in terms of the economic burden. The indirect costs were identified as the largest component of the overall cost.

• Weed & Turfgrass Science
• /
• v.1 no.4
• /
• pp.31-37
• /
• 2012

This study was conducted to make the rice yield prediction model system as affected by densities of Aneilema keisak and Aeschynomene indica and to determine their economic threshold levels in flooded direct-seeded rice. When the density of A. keisak was 8 plants per $m^2$, the yield of rice reduced to 8% and as the density increased up to 96 plants per $m^2$, the reduced rate of rice yield reached to 45% and in A. indica, the reduced rate of rice yield were 20 and 77%, respectively. The rice yield loss models of A. keisak and A. indica were predicted as Y=553.2 kg (1+0.00913X), $R^2=0.912^{**}$ and Y=567.9 kg/(1+0.04434X), $R^2=0.961^{**}$, respectively. Economic threshold levels calculated using cousens' equation were 3.0 plants per $m^2$ in A. keisak and 0.6 plants per $m^2$ in A. indica.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.17-23
• /
• 2004

A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyze the heat quantity of homogeneous charge methane-air mixture under various initial pressures, excess air ratios and ignition times. As the overall pressure increase, the values of maximum combustion pressure, maximum heat release rate and cumulative heat release have been increased. But it is not very meaningful to compare with some values such as maximum combustion pressure, maximum heat release rate and cumulative heat release for different overall pressure due to the different heat energy of supplied fuel. So the each value is needed to be compared with normalized value, which is divided by the entered fuel energy. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. As the overall pressure increase, the CHR ratios and the UHC ratios have been decreased, while the HL ratios have been increased. The CHR ratio of 300 ms has the higher value than that of 10000ms, and the HL ratios of 300 ms have a lower value.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.635-645
• /
• 2020

This research was conducted to achieve several objectives and focus research was based on financial behavior theory and prospect theory as grounded theory e.g., investigate the financial decision-making behavior between financial and real assets investment, and confirm the relationship existing between herding behavior and overconfidence factors to the level of loss and regret aversion, and financial literacy into real assets investment decisions. The study used 220 real estate auction respondents as investor samples at the State Assets and Auction Service Office Makassar, South Sulawesi, Indonesia. Data was collected through the use of a questionnaire consisting of 23 questions to measure the variables. Moreover, the research data passed through several feasibility tests like the inner and outer modeling by Partial Least Square - Structural equation model (PLS-SEM) while the hypotheses formulated were also tested to determine the magnitude of the variable relationship. Through the use of the direct and intervening test, loss and regret aversion variables have a positive and significant effect while financial literacy variables have no significant effect. There is a slight difference in the decision-making process for real assets and financial assets investors. Investment decision making behavior in the financial assets sector requires less complicated decisions compared to the decisions related to real assets investments.

• Journal of Power System Engineering
• /
• v.21 no.5
• /
• pp.5-12
• /
• 2017

With the difficulties in increasing the efficiency of conventional crank-driven compressors due to mechanical loss, compressor manufacturers have investigated new kinds of compressor such as a free piston compressor mechanism. This study investigates the energy efficiency of two different types of compressor for a household refrigerator. One is the conventional crank-driven compressor, and the other one is a linear compressor. The energy efficiencies of these compressors are evaluated. Experimental results show that the linear compressor has 10% lower power consumption than the brushless direct-current (BLDC) reciprocating compressor. The linear compressor demonstrates excellent energy efficiency by reducing the friction loss. Furthermore, a motor efficiency exceeding 90% is achieved by using a linear oscillating mechanism with a moving magnet. Additionally, the compressor stroke to piston diameter ratio of the oscillating piston in the linear compressor can be adjusted in order to modulate the cooling capacity of the compressor for improved system efficiency.