• Design & Manufacturing
• /
• v.6 no.2
• /
• pp.64-69
• /
• 2012

This study looks at plastic mold design for robots and mold manufacture, which is an injection mold branch at The Korea-China-Japan University Grand Prize Contest. Product analysis and layout, molding analysis, and upper and lower core design are carried out to design molds in 2D and 3D. After the design of the cores, NC machining software is used for simulation before actual manufacture. Before the production of end-product, test injection is done to troubleshoot problems like bad dimensions, burr, cracks and stepped pulley.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.29-34
• /
• 2002

This paper presents formation of ejector-pin hollowness in injection molding. Injection molding process is widely used in production of plastic part for good dimensional accuracy and high productivity. However, the injection molding leaves ejector-pin hollowness on pal, which causes bad part surface and quality. Dimensions and profiles of ejector-pin hollowness are measured for formation or ejector-pin hollowness. The formation of ejector-pin hollowness is traced with dimensions and profiles of ejector-pin hollowness. The compression force and moment cause ejector-pin to form hollowness on part surface.

• Management & Information Systems Review
• /
• v.28 no.4
• /
• pp.45-66
• /
• 2009

This research investigates the systematic relation between corporate governance and corporate social responsibility(CSR). Based on the argument that corporate governance would play the role of mitigating conflicts between firms and society, we hypothesized that corporate governance would enhance CSR performance. Specifically, the firms with good governance are predicted to have CSR performance than those with bad governance. These hypotheses were tested using 130ce rean firms from 1998 to 2005. An index published by e rean Economic Justice mance the(KEJm) was used as the measureses wSR performance. Our empirical results suggest that the firms with good governance as measured by f reign investh bad goothshae directh bad goirdit committee exhibit better CSR performance. The primary purposeses this s tdy is to identify the determinants es the use b' satissaction and commitment in pe bn thomedia. For these purposes, we developegoi research modehobased on the literaturesreviews es pe bn tho media, pe ceived risk and interactivity, satissaction, and commitment. This study has identified four dimensions in the concept of perceived risk, such as privacy risk, social risk, time loss risk, and economic risk, and three dimensions in the concept of perceived interactivity, such as active control, two-way communication, and responsiveness.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.47-51
• /
• 2009

It is well known that a rudder is influential devices to help ship maintain its stable performances, such as a course-keeping and maneuverability. In the procedures of a commercial ship design proper rudder dimensions (area and shape) ensuring better ship maneuverability have been settled in an initial concept design stage performed by a preceding department, without little structural consideration. It is true that there are time discrepancy between an initial design and a structural analysis stage. Therefore structural analysis results would sometimes cause a rudder to modify its dimensions. Most of these cases, however, ship design and performance tests had been finished. In this matter, only limited modifications of redder could be carried out. Besides, these could also cause bad effects on productivity. Finally, it is necessary to develop a new program considering co-relationship between an initial rudder design and a following work, a structural strength analysis, in order to enhance productivity and minimize a rate of redesign procedures.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.131-141
• /
• 2020

This study examines the poverty indicators in Northeast region of Thailand by adopting the global Multidimensional Poverty Index (MPI) methodology and the national survey of Minimum Basic Needs (MBN) of Thailand. Data are collected from three different districts in Khon Kaen province namely: Khok Po Chai, Sam Sung, and Nam Pong. The sample size is 187 households. Data analysis uses Ordinary Least Square (OLS) regression approach and includes 7 dimensions of poverty (health, environment, education, economy, Thai value, asset? empowerment, and digital literacy) with a total of 41 indicators. This study has found that poverty indicators in Khon Kaen province remains centered around the aspects of health and employment dimensions. While a change of family structure in the Thai society since 1960s reduces the family size, household saving substantially increases over the years. The effects of health dimension in poverty, on the other hand, appears on the other poverty dimension of Thai value, which include (1) a bad living habit of head of household (smoke or alcohol consumption) that links with illness and disease, (2) religious practice, and (3) chronic illness. Lastly, there are income gaps of different careers in the area, which suggests the issue of income inequality.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.205-209
• /
• 2007

During after the Industrial Revolution until now, as many of working machinery and tool had been invented, human could save man power and time. However, because such instruments generate a loud noise according to their use-purposes and dimensions, they are affecting a physical, mental bad influences to those workers. Therefore, while a reduction measure against the instrument-noise that generates at workshop is sincerely necessitated, due to lack of the research and data concerned with that, a lot of difficulties are on suffering. Standing on such point of view, this Study has measured analyzed the characteristics of diverse instrument-noises generate at workplace, and would intends to present a fundamental material for establishment more comfortable working environment by prediction on the noise in loud noise workshop, based on the above.

• Design & Manufacturing
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2013

The injection molding process is a predominant method for producing plastic parts. In order to maximize productivity and molding quality in a injection mold, it is important that each cavity in a multi-cavity injection mold is identical. This requires that cavity dimensions should be identical and delivery system of melt to each cavity have to be the same. Despite the geometrically balanced layout in multi-cavity injection mold more than 4 cavities, it has been observed that the filling in each cavity results in imbalances. Most of cases, this phenomenon of filling imbalances have a bad effect on dimension accuracy, warpage, molding appearance and strength of molding parts. In this study, experiment were conducted to investigate the effect of filling imbalances on the molding quality(surface gloss, shrinkage, tensile strength) in the multy-cavity injection mold.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.844-847
• /
• 1996

This paper describes the servo position control for the 2-axis positioning table the servo controller consists of conventional feedback loops, disturbance observer. To reduce the contour error, which occurs in the multi-dimensions machines, cross-coupled controller(CCC) is suggested. A weak point of the CCC is their low effectiveness in dealing with arbitrary nonlinear contour such as circles and parabolas. This paper introduces a new nonlinear CCC that is based on control gains that vary during the contour movement The gains of CCC and adjusted in real time according to the shape of nonlinear contour. The feedback controller based on the disturbance observer compensated for external disturbance, plant uncertainty and bad effectiveness by friction model. Suggested servo controller which improve the contouring accuracy, apply to the 2-axis system. Simulation results on 2-axis table verify the effectiveness of the proposed servo controller.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.968-974
• /
• 2004

Automakers have been forcing their suppliers to guarantee qualities of parts. Then, the suppliers have met the fundamental quality requirements such as dimensions and functions, but they could not sufficiently satisfy the automakers' noise requirements yet because automatic noise inspection systems were little successfully adopted In mass-production lines. This study tried to develop a system for automatically checking noise radiated from a rotating engine part and filtering parts emitting noise higher than criteria: the upper limits of a overall noise level or a noise spectrum. A commercial noise measurement system was used for measuring noise, and then the noise data was transmitted to a governing program through OLE(object, linking and embedding) functions. The governing program, belonging to a total noise inspection system managed the noise measurement and analysis. This system was successfully adapted for distinguishing bad parts according to the noise criteria.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.89-94
• /
• 2008

The injection molding process is a predominant method for producing plastic parts. In order to maximize productivity and molding quality in a injection mold, it is important that each cavity in a multi-cavity injection mold is identical. This requires that cavity dimensions should be identical and delivery system of melt to each cavity have to be the same. Despite the geometrically balanced layout in multi-cavity injection mold more than 4 cavities, it has been observed that the filling in each cavity results in imbalances. Most of cases, this phenomenon of filling imbalances have a bad effect on dimension accuracy, warpage, molding appearance and strength of molding parts. In this study, experiment were conducted to investigate the effect of filling imbalances on the molding quality(surface gloss, shrinkage, tensile strength) in the multy-cavity injection mold.