• 제목/요약/키워드: Dihydrate gypsum

검색결과 18건 처리시간 0.019초

Study on the Retarding Mechanism and Strength Loss of Gypsum from Hydrolyzed Wheat Protein Retarder

  • Ding, Yi;Fang, Youchun;Fang, Hui;Zhang, Qicai;Zhang, Fengjun;Oh, Won-Chun
    • 한국세라믹학회지
    • /
    • 제52권1호
    • /
    • pp.28-32
    • /
    • 2015
  • In this article, the influence of a hydrolyzed wheat protein retarder on the hydration process, ion concentration in liquid phase, degree of supersaturation, and crystal morphology of plaster was investigated. Furthermore, the retarding mechanism and the strength loss of gypsum were also studied by scanning electron microscopy (SEM). The results indicate that the use of the hydrolyzed wheat protein retarder for plaster achieved a better retarding effect and lower strength loss. The combination of gypsum plaster with the retarder not only decreased the plaster's early hydration rate and prolonged its setting time efficiently, but also militated against the crystal morphology of dihydrate gypsum. For example, the crystal dimensions changed little, but the proportion of needle-shaped crystals decreased. Combination with calcium ions on the surface of dihydrate gypsum crystal nuclei may form a chemisorbed layer, reduce the surface energy of the crystal nuclei, and inhibit the growth of the crystal nuclei of dihydrate gypsum. Consequently, the hydration process of building gypsum becomes greatly extended and is slowed down significantly.

석고종류 및 소각장애시 치환율 변화에 따른 고로슬래그 미분말 활용 무시멘트 모르타르의 공학적 특성 (Engineering Properties of Zero-Cement Mortar with Variation Replacement Ratio of Incineration Waste Ash and Gypsum)

  • 박준희;황금광;김준호;조만기;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.222-223
    • /
    • 2014
  • In this study, industrial by-products including blast furnace slag, incineration ash and waste gypsum were used with recycled fine aggregates to manufacture the zero-cement mortar.The replacement ratio of dihydrate gypsum and anhydrite gypsum was fixed as 0 and 10%, the replacement ratio fo WA1 was fixed as 0.5% and 1.0%, respectively. It could be identified that when the replacement of gypsum was 10% and WA1 of 1.0%, the strength could be in the range of normal strength.

  • PDF

석고 종류 및 혼입률에 따른 CAC 반응 특성 (Reaction Characteristics of the CAC with Various Gypsum Type and Mixing Ratio)

  • 최선미;김진만;구자술
    • 자원리싸이클링
    • /
    • 제30권1호
    • /
    • pp.83-91
    • /
    • 2021
  • 조강 생산 시 발생되는 슬래그는 대부분 서냉 방식에 의해 처리되고 있다. 하지만 슬래그 중 일부는 속경성 광물을 포함하고 있음에도 불구하고, 서냉 방식에 의해 그 반응성을 상실하게 된다. 이에 본 연구에서는 제강환원슬래그를 SAT공법에 의하여 공기 급냉하여 선별 및 분급 후 분쇄한 CAC의 활용성 확대를 목적으로 석고 종류 및 혼입율에 따른 CAC의 특성에 관하여 고찰하였다. 그 결과, CAC는 3시간에서는 석고 용해도, 1일 이후에는 석고 함량비에 따라 특성이 나타나는 것을 확인하였다. 반수, 무수석고의 적정 혼입율은 30% 이내, 이수석고는 35% 이상인 것을 확인하였으며, 이수석고의 혼입율 및 특성 확인을 통하여 부산이수석고의 적용 가능성을 확인하였다.

천연 수경성 석회의 수화특성에 미치는 석고의 영향 (Effect of Gypsum on Hydration Properties of Natural Hydraulic Lime)

  • 문기연;최문관;조계홍;조진상;안지환;홍창우
    • 자원리싸이클링
    • /
    • 제24권1호
    • /
    • pp.12-20
    • /
    • 2015
  • 본 연구에서는 고로 수쇄 슬래그 및 석고를 혼합한 3성분계 천연 수경성 석회 페이스트에서 석고종류 및 혼합량에 따른 수화특성 변화를 확인하고자 하였다. 고로 수쇄 슬래그 20 %를 혼합한 천연 수경성 석회에 무수석고, 반수석고, 이수석고를 각각 3 %, 10%를 혼합하여 석고의 용해도 및 반응성에 따라 수화초기 생성되는 수화물의 종류와 생성량을 분석하였으며, 이에 따른 물리적 특성 변화거동에 대하여 조사하였다. 페이스트를 활용한 수화특성 결과 모든 샘플에서 수화초기 ettringite, C-S-H와 같은 수화물이 생성되었으며, 재령이 길어짐에 따라 수화물의 생성량이 증가하였다. 압축강도 측정결과, 석고 혼합량이 3 %일 때 더 높은 강도를 보였으며 재령 28일에서 무수석고 및 반수석고가 이수석고를 혼입할 경우 보다 높은 특성을 나타내었다.

Gypsum-Wood의 제조와 성질 (Manufacture and Properties of Gypsum-Wood)

  • 이종신;김성준
    • 한국가구학회지
    • /
    • 제19권1호
    • /
    • pp.83-90
    • /
    • 2008
  • Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

  • PDF

산업부산물을 활용한 CSA 첨가량에 따른 광산 차수재 특성에 관한 연구 (A Study on the Characteristics of Mine Liner According to the Contents of CSA Using Industrial Byproducts)

  • 강석표;이영훈;강혜주;조성현;조용광
    • 한국건설순환자원학회논문집
    • /
    • 제7권1호
    • /
    • pp.74-81
    • /
    • 2019
  • 본 연구에서는 산업부산물을 활용한 CSA와 이수석고를 광산 차수재에 적용하기 위한 기초자료를 제시하고자 CSA와 이수석고 첨가량에 따른 차수재의 특성을 검토하였으며 그 결과를 다음과 같이 나타내었다. CSA 첨가량에 따른 광산 차수재의 압축강도, 길이변화, 흡수율 측정결과 CSA30%까지는 초기재령에서의 강도증가와 더불어 수축 및 흡수율저감 효과에 긍정적인 영향을 미치는 것으로 나타났다. 그러나 CSA50%에서는 과량 사용으로 인하여 수축보상 및 공극충진보다는 과팽창으로 인한 흡수율 증가와 시멘트양 감소로 인하여 OPC와 비교하여 15% 감소하였다.

슬래그시멘트 초기강도 증진을 위한 자극제로서 CFBC Fly ash의 활용연구 (Application on the CFBC Fly Ash as a Stimulant to Improve the Early Strength of Hydration Portland Cement)

  • 박종탁;오홍섭;정권수;강창호
    • 한국건설순환자원학회논문집
    • /
    • 제8권1호
    • /
    • pp.8-16
    • /
    • 2020
  • 환경오염 저감을 위해 순환유동층 보일러를 활용한 발전이 증가함에 따라 CFBC 플라이애시가 많이 생산되고 있다. CFBC 플라이애시내는 수화반응 중 시멘트의 팽창과 급격한 초기응결을 발생시킬 수 있는 free CaO를 포함하고 있기 때문에 콘크리트에서의 사용이 제한적이다. 본 연구에서는 고로슬래그시멘트의 초기강도 증진을 위해 CFBC 플라이애시와 인산석고와 같이 혼합함으로서 천연석고를 대체하는 자극제로 활용하고자 하기 위하여 미세구조와 초기강도 특성을 실험적으로 분석하였다. 인산석고는 배면탈황석고와 인산중화석고를 사용하였으며, 이수상태와 무수상태로 각각 혼합하여 실험하였다. 실험결과 CFFA와 dihydrate 형태의 이수석고를 혼합하는 경우에는 상대적으로 초기강도 발현이 낮아지나, CFFA와 anhydriteII 결정형태인 무수인산석고를 혼합한 배합의 강도 증진효과가 천연석고를 사용한 경우와 유사하여 혼합시멘트로 활용 가능성이 높은 것으로 분석되었다.

이수석고가 고로슬래그 미분말 활용 무시멘트 모르타르의 기초물성에 미치는 영향 (Effect of Adding Gypsum in Blast-Furnace-Based Mortar's Fundamental Properties)

  • 여량량;김준호;박준희;황금광;백병훈;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 추계 학술논문 발표대회
    • /
    • pp.137-138
    • /
    • 2013
  • Nowadays, research about using recycled aggregate as alkali activator has been investigated. By the mechanism of Alkali activation, blast furnace slag's potential hydraulis property would be activated. Thee application of this technique is considered as fit for low strength concrete, so it's suitable in concrete secondary production such as bricks and blocks. Aside alkali activator, sulfate could also activate blast furnace slag's potential hydranlis property. In this research, gypsum(CaSO4·2H2O)has been added with blast furnace slag. Fundamental experiment such as flow and strength has been tested to evalnate effect of gypsum's activation property.

  • PDF

Preparation of Calcium Sulfate Hemihydrate Using Stainless Refinery Sludge and Waste Sulfuric Acid

  • Eun, Hee-Tai;Ahn, Ji-Whan;Kim, Hwan;Kim, Jang-Su;Sung, Ghee-Woong
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.432-436
    • /
    • 2001
  • In this study, calcium sulfate(gypsum) powder was obtained using waste sulfuric acid and stainless refinery sludge by- produced from chemical reagent and the iron industry, by the neutralization of waste sulfuric acid. As variables for the experiment the mole ratio of the H$_2$SO$_4$ : Ca(OH)$_2$, the pH, the reaction temperature and time, the amount of catalyst were used. The crystal shape and microstructure of obtained powder were observed by XRD and SEM, and the thermal property was investigated by DTA. As the NaCl is added 0~20wt% as a catalyst to the H$_2$SO$_4$ : Ca(OH)$_2$, system it can be found that the crystal shape goes through the processes as follows : gypsum dihydratlongrightarrowgypsum hemihydrate+gypsum dihydratelongrightarrowgypsum hemihydrate. And gypsum hemihydrate is $\beta$-type as the result of DTA. As waste sulfuric acid and stainless refinery sludge were used, the pH of reacted solution (which was 0.8) was rapidly raised up to 8~9 by the addition of stainless sludge and gypsum dihydrate was produced as a by-product. Therefore, it was found that stainless refinery sludge is sufficiently applicable for the neutralization of waste sulfuric acid.

  • PDF

이수석고가 고로슬래그 미분말 베이스 무시멘트 모르타르의 기초물성에 미치는 영향 (Effect of Calcium Sulfate Dihydrate (Gypsum) on the Fundamental Properties of Slag-based Mortar)

  • 백병훈;한천구
    • 한국건축시공학회지
    • /
    • 제14권3호
    • /
    • pp.252-258
    • /
    • 2014
  • 최근에 저탄소녹색성장 및 OPC 절감의 요구에 따라 BS와 같은 산업 부산물을 많이 사용하고 재건축의 증가 및 건설폐기물 발생량이 많아지면서 RA 사용 확대하게 되며, RA 및 무 시멘트 결합재 관심 증대 되고 있다. 무 시멘트 결합재와 RA의 활용을 모두 만족시키기 위하여, RA와 철강 산업 부산물인 BS을 혼합함으로써, 100% 순환자원만을 활용하여 무 시멘트 상태에서 강도발현성을 확인한 바 있다.이에 본 연구는 OPC를 사용하지 않고, BS과 RA 및 CS를 사용하여 모르타르를 제조함으로써 기존 강알칼리를 투입하여 제조하는 지오폴리머 모르타르(Geopolymermortar)와 또 다른 관점에서 접근하였다. 결과적으로, RFA의 유동성 저하 및 초기강도 저하문제만 해결 될 수 있다면, BS에 CS를 15% 치환하고 RFA골재를 사용하는 무 시멘트 모르타르가 OPC 100%를 사용한 종래의 시멘트 모르타르 만큼의 품질을 발휘할 수 있을 것으로 사료된다.