• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.607-614
• /
• 1996

A computer vision based automatic intelligent sorting system for dried oak mushrooms has been developed. The developed system was composed of automatic devices for mushroom feeding and handling, two sets of computer vision system for grading , and computer with digital I/O board for PLC interface, and pneumatic actuators for the system control. Considering the efficiency of grading process and the real time on-line system implementation, grading was done sequentially at two consecutive independent stages using the captured image of either side. At the first stage, four grades of high quality categories were determined from the cap surface images and at the second stage 8 grades of medium and low quality categories were determined from the gill side images. The previously developed neuro-net based mushroom grading algorithm which allowed real time on-line processing was implemented and tested. Developed system revealed successful performance of sorting capability of approximate y 5, 000 mushrooms/hr per each line i.e. average 0.75 sec/mushroom with the grading accuracy of more than 88%.

• 한국항공우주학회지
• /
• 제50권9호
• /
• pp.639-646
• /
• 2022

본 논문은 사전에 알려지지 않은 환경에서 깊이지도를 이용하여 정보를 획득하고, 이를 기반으로 쿼드로터의 착륙 선택 알고리즘 성능을 분석한다. 무인항공기의 유도 및 제어시스템은 궤적 계획 유도시스템과 위치 및 자세 제어기로 구성된다. 아래를 향하는 짐벌 시스템에 부착된 스테레오 비전 센서가 획득한 깊이 정보를 이용하여 착륙 지점을 선정한다. 평탄도 정보는 사전 정의된 깊이지도 영역의 최대 깊이 차이 및 UAV와의 거리를 고려하여 산출한다. 본 논문에서는 3가지 착륙 방법을 제안하며 다양한 성능지수들을 활용하여 성능을 비교한다. 성능지수로는 UAV 이동 거리, 지도 정확도, 장애물 대응 시간 등을 고려한다.

• International Journal of Computer Science & Network Security
• /
• 제23권5호
• /
• pp.193-206
• /
• 2023

In recent years, and with the increased adoption of digital transformation and spending long hours in front of these devices, clinicians have observed that the prolonged use of visual display units (VDUs) can result in a certain symptom complex, which has been defined as computer vision syndrome (CVS). This syndrome has been affected by many causes, such as light refractive errors, poor computer design, workplace ergonomics, and a highly demanding visual task. This research focuses on eliminating one of CVSs, which is the eye dry syndrome caused by infrequent eye blink rate while using a smart device for a long time. This research attempt to find a limitation on the current tools. In addition, exploring the other use cases to utilize the solution based on each vertical and needs.

• 제어로봇시스템학회논문지
• /
• 제6권5호
• /
• pp.396-403
• /
• 2000

A thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main part of the system is a thermal camera in which a focal plane array typed sensor is introduced. The sensor detects the mid-range infrared spectrum of target objects and then it outputs a generic video signal which should be processed to form a frame thermal image. Here, a digital signal processor(DSP) is applied for the high speed processing of the sensor signals. The DSP controls analog-to-digital converter, performs correction algorithms and outputs the frame thermal data to frame buffers. With the frame buffers can be generated a NTSC signal and transferred the frame data to personal computer(PC) for the analysis and a monitoring of the thermal scenes. By performing the signal processing functions in the DSP the overall system achieves a simple configuration. Several experimental results indicate the performance of the overall system.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.539-547
• /
• 2007

본 논문은 영상정보를 이용하여 사용자의 눈의 움직임을 통해 응시점을 추적하는 실시간 아이트랙커 시스템 개발에 대한 연구이다. 개발된 시스템은 광학기반의 동공추적 기법을 이용하여 사용자의 눈의 움직임을 추적한다. 광학기반의 방법은 사용자의 눈에 아무런 장애도 일으키지 않고 눈의 위치를 매우 정확하게 측정 할 수 있다는 장점을 가진다. 동공영상을 획득하기 위해 적외선 카메라를 사용하며, 획득한 영상으로부터 정확한 동공영역을 추출하기 위해 적외선 LED를 사용한다. 실시간 영상처리가 가능하게 하기위해 칼만필터를 적용한 동공추적 알고리즘을 개발하고 DSP(Digital Signal Processing) 시스템을 사용하여 동공영상을 획득한다. 실시간 아이트랙커 시스템을 통하여 실시간으로 사용자의 동공움직임을 추적하고 사용자가 바라보는 배경영상에 사용자의 응시점을 나타낸다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1840-1843
• /
• 1997

The task environment of a robot is changing rapidly and task itself becomes complicated due to current industrial trends of multi-product and small lot size production. A convenient user-interfaced off-line programming(OLP) system is being developed in order to overcome the difficulty in teaching a robot task. Using the OLP system, operators can easily teach robot tasks off-line and verify feasibility of the task through simulation of a robot prior to the on-line execution. However, some task errors are inevitable by kinematic differences between the robot model in OLP and the actual robot. Three calibration methods using image information are proposed to compensate the kinematic differences. These methods compose of a relative position vector method, three point compensation method, and base line compensation method. To compensate a kinematic differences the vision system with one monochrome camera is used in the calibration experiment.

• 전자공학회논문지 IE
• /
• 제45권2호
• /
• pp.28-33
• /
• 2008

본 논문에서는 휴머노이드를 이용한 로봇 축구 시스템을 새롭게 제안하며, 다수의 인간형 로봇을 제어하는 방법과 축구 경기를 하기 위한 전략 알고리즘 등에 대해 기술하였다. 로봇의 위치와 방향을 파악하기 위해서 로봇의 위쪽 어깨 부분에 각각의 로봇을 구분할 수 있는 칼라 태그를 부착하였고, 빠른 위치와 방향 인식을 위해 전용의 PC를 통해 영상인식을 수행하였다. 본 논문에서 제안한 휴머노이드 로봇 축구 시스템은 기존의 바퀴 구동형 축구 로봇을 한 단계 발전시킨 것으로, 앞으로 많은 연구를 통하여, 인간처럼 자율 이동이 가능한 로봇 축구 경기가 가능하리라 본다.

• 한국측량학회지
• /
• 제30권6_2호
• /
• pp.643-651
• /
• 2012

Object recognition belongs to high-level processing that is one of the difficult and challenging tasks in computer vision. Digital photogrammetry based on the computer vision paradigm has begun to emerge in the middle of 1980s. However, the ultimate goal of digital photogrammetry - intelligent and autonomous processing of surface reconstruction - is not achieved yet. Object recognition requires a robust shape description about objects. However, most of the shape descriptors aim to apply 2D space for image data. Therefore, such descriptors have to be extended to deal with 3D data such as LiDAR(Light Detection and Ranging) data obtained from ALS(Airborne Laser Scanner) system. This paper introduces extension of chain code to 3D object space with hierarchical approach for segmenting point cloud data. The experiment demonstrates effectiveness and robustness of the proposed method for shape description and point cloud data segmentation. Geometric characteristics of various roof types are well described that will be eventually base for the object modeling. Segmentation accuracy of the simulated data was evaluated by measuring coordinates of the corners on the segmented patch boundaries. The overall RMSE(Root Mean Square Error) is equivalent to the average distance between points, i.e., GSD(Ground Sampling Distance).

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.249-256
• /
• 2020

Learning methods using various assistive and smart devices have been developed to enable independent learning of the disabled. Pointer control is the most important consideration for the disabled when controlling a device and the contents of an existing graphical user interface (GUI) environment; however, difficulties can be encountered when using a pointer, depending on the disability type; Although there are individual differences depending on the blind, low vision, and upper limb disability, problems arise in the accuracy of object selection and execution in common. A multimodal interface pilot solution is presented that enables people with various disability types to control web interactions more easily. First, we classify web interaction types using digital devices and derive essential web interactions among them. Second, to solve problems that occur when performing web interactions considering the disability type, the necessary technology according to the characteristics of each disability type is presented. Finally, a pilot solution for the multimodal interface for each disability type is proposed. We identified three disability types and developed solutions for each type. We developed a remote-control operation voice interface for blind people and a voice output interface applying the selective focusing technique for low-vision people. Finally, we developed a gaze-tracking and voice-command interface for GUI operations for people with upper-limb disability.

• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.12-18
• /
• 2009

본 논문은 LED 디스플레이 시스템에서 균일하고 부드러운 영상표출을 위하여 각각의 Red, Green, Blue LED의 휘도를 조절하여 흰색보정을 유지할 수 있는 프로세서를 설계하였다. 이 프로세서는 일반적인 LED소자의 특성곡선을 근거로 "a"를 고유특성 값, "b"를 사용시간에 따른 휘도보정 값, "X"를 구동전류 값, "Y"를 휘도 값이라 할 때, "Y=aX+b"로 설정되는 휘도 특성함수에 의하여 각 픽셀의 휘도에 따른 구동 전류 값을 산출하여 휘도를 보정하고, 또한 장시간 사용 시 LED소자의 휘도 저하 문제를 해결하기 위하여 "b"값을 조절하여 LED 디스플레이 시스템의 전체 평균 휘도 값을 상향시킬 수 있도록 구현하였다.