Object: The present study was accomplished to obtain a gene expression profile of the luminal epithelium during embryo apposition in comparison of implantation (1M) and interimplantation (INTER) sites. Material and Method: The mouse uterine luminal epithelium from IM and INTER sites were sampled on day 4.5 (Day of vaginal plug = day 0.5) by Laser Captured Microdissection (LCM). RNA was extracted from LCM captured epithelium, amplified, labeled and hybridized to microarrays. Results from microarray hybridization were analyzed by Significance Analysis of Microarrays (SAM) method. Differential expression of some genes was confirmed by LCM followed by RT-PCR. Results: Comparison of IM and INTER sites by SAM identified 73 genes most highly ranked at IM, while 13 genes at the INTER sites, within the estimated false discovery rate (FDR) of 0.163. Among 73 genes at IM, 20 were EST/unknown function, and the remain 53 were categorized to the structural, cell cycle, gene/protein expression, immune reaction, invasion, metabolism, oxidative stress, and signal transduction. Of the 24 structural genes, 14 were related especially to extracellular matrix and tissue remodeling. Meanwhile, among 13 genes up-regulated at INTER, 8 genes were EST/unknown function, and the rest 5 were related to metabolism, signal transduction, and gene/protein expression. Among these 58 (53+5) genes with known functions, 13 genes (22.4%) were related with $Ca^{2+}$ for their function. Conclusions: Results of the present study suggest that 1) active tissue remodeling is occurring at the IM sites during embryo apposition, 2) the INTER sites are relatively quiescent than IM sites, and 3) the $Ca^{2+}$ may be a crucial for apposition. Search for human homologue of those genes expressed in the mouse luminal epithelium during apposition will help to understand the implantation process and/or implantation failure in humans.
Open banking, the global trend of the financial industry, is the driving force behind various innovations in the financial market in the future. The right policy direction and detailed tasks are important for triggering the differentiation and reunion of the financial industry. The purpose of this study is to investigate and analyze the background of open banking, domestic and international trends, and Korea's open banking policy. The policy directions and tasks for successful settlement and activation of open banking system are carefully suggested. Open banking is a policy to allow third party provider(TPP) access to bank accounts and open payment functions under the explicit consent of the customer. The opening of the open banking era is expected to begin competition and cooperation between banks and fintech companies in earnest, thus enhancing the competitiveness of the financial industry and contributing to the utility of financial consumers. To this end, policymakers should make every effort to advance open-ended financial settlement infrastructure, open banking legal grounds, and minimize side effects such as customer data leakage and poor financial system stability. Banks and fintech companies will need to focus on scattered customer financial information on a single platform and develop it into a convergence and discrimination of true financial services.
In this paper, we have designed an integrated triplexer which is the basic component for a FTTH(Fiber To The Home) system which can transmit CATV and voice/data at the same time in a single fiber. The integrated triplexer can be fabricated with a novel technique of "Micro-Block Stacking (MBS)" method which automatically aligns the optical components in the optical beam pass using accurate ceramic holders. We analyze the displacement of the optical focus according to the tolerances of the component dimensions and the assembly process using code V simulator. For the transmitter, the most serious shift of the focal points is caused by the displacements of the LD spot. So the focal point moves up to $72{\mu}m$ from the center point for ${\pm}25{\mu}m$, ${\pm}25{\mu}m$, ${\pm}30{\mu}m$ displacements. For the receiver the most serious shift of the focal points is caused by the displacements of a 0.8mm ball lens (for the analog receiving part) and a micro ball lens (for the digital receiving part), and the focal point moves up to $55{\mu}$ for ${\pm}55{\mu}m$, ${\pm}5{\mu}m$, ${\pm}55{\mu}m$ micro ball lens displacements.
These studies were performed to provide some basic informations for developing an automatic system in dairy farming cattle in order that the farmers may easily and automatically detect the maintenance of pregnancy and the fact of abortion of the pregnant cows and also to find out the diseased animals with fever. As a method of automatical detection of the maintenance of pregnancy or the fact of abortion, weighing the pregnant cows was conducted from one month-pregnancy to the term using a digital balance. From the first to the 3rd month of pregnancy the body weight of dairy cows was slowly increased (less than 2% per month), then, relatively high increase (3.4% -4.3% per month) from the fourth to the seventh month followed by decrease (3.3%) in the 8th month and very low increase (0.8-0.9%) from the 9th month to the term were shown, resulting in increase of 128.8 kg (25.05%) of body weight to be compared with the first weight. More than 107, increase of body weight to be compared with the first month-weight was denoted from the 61th month of pregnancy and more than 20% increase from the 7th or the 8th month of pregnancy as wells consequently it was presumed that detection of the maintenance of pregnancy is possible from the 4th or the 5th month of pregnancy. It was possible to diagnose a cow aborted at the 6th month by continual weighing the cow from the 1st month of pregnancy. The calved cows showed considerably higher decrease of body weight even in the third week after parturition (p<0.01)to be compared with the body weight near to the term (81.8-102.0 kg, 14-16% decrease). During the same period of 8months, the pregnant cows gained 127.4 kg (24.78% increase), whereas the non-pregnant cows gained 33.0 kg (0.71% increase) to be compared with the first weight showing considerably higher increase of body weight gain in the pregnant cows than the non-pregnant cows (p<0.01). The statistics of body temperatures of dairy cattle were collected from three clinics including the Teaching Hospital of Chonbuk University and the diseases were classified simply by the major symptoms manifested, denoting the highest temperature in respiratory disease ($39.8{\circ}C$) and the lowest in alimentary disease ($39.6{\circ} C$). These informations of body temperatures were expected to be of value for early and automatical detection of the diseased animals with fever when automatic machinery would be established. The results of periodic weighing the body weight of pregnant cows while milking were also expected to be of great use for the farmers to detect the maintenance of pregnancy and the fact of abortion when the automatic system is established in the near future.
Park, Sang-Je;Kim, Young-Hyun;Lee, Sang-Rae;Choe, Se-Hee;Kim, Myung-Jin;Kim, Sun-Uk;Kim, Ji-Su;Sim, Bo-Woong;Song, Bong-Seok;Jeong, Kang-Jin;Jin, Yeung-Bae;Lee, Youngjeon;Park, Young-Ho;Park, Young Il;Huh, Jae-Won;Chang, Kyu-Tae
Molecules and Cells
/
v.38
no.11
/
pp.950-958
/
2015
BCS1L gene encodes mitochondrial protein and is a member of conserved AAA protein family. This gene is involved in the incorporation of Rieske FeS and Qcr10p into complex III of respiratory chain. In our previous study, AluYRa2-derived alternative transcript in rhesus monkey genome was identified. However, this transcript has not been reported in human genome. In present study, we conducted evolutionary analysis of AluYRa2-exonized transcript with various primate genomic DNAs and cDNAs from humans, rhesus monkeys, and crabeating monkeys. Remarkably, our results show that AluYRa2 element has only been integrated into genomes of Macaca species. This Macaca lineage-specific integration of AluYRa2 element led to exonization event in the first intron region of BCS1L gene by producing a conserved 3' splice site. Intriguingly, in rhesus and crabeating monkeys, more diverse transcript variants by alternative splicing (AS) events, including exon skipping and different 5' splice sites from humans, were identified. Alignment of amino acid sequences revealed that AluYRa2-exonized transcript has short N-terminal peptides. Therefore, AS events play a major role in the generation of various transcripts and proteins during primate evolution. In particular, lineage-specific integration of Alu elements and species-specific Alu-derived exonization events could be important sources of gene diversification in primates.
The purpose of this study was to compare GRF characteristics during walking wearing jogging and roller shoes. Twelve male middle school students (age: $15.0{\pm}0.0\;yrs$, height: $173.6{\pm}5.0\;cm$, weight: $587.6{\pm}89.3\;N$) who have no known musculoskeletal disorders were recruited as the subjects. Kinematic data from six S-VHS camcorders(Panasonic AG456, 60 fields/s) and GRF data from two force platform; (AMII OR6-5) were collected while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and GRF recordings. GRF data were filtered using a 20 Hz low pass Butterworth. digital filter and further normalized to the subject's body weight. For each trial being analyzed, five critical instants and four phases were identified from the recording. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p <.05). Vertical GRFs at heel contact increased and braking forces at the end of initial double limb stance reduced significantly when going from jogging shoe to roller shoe condition. Robbins and Waked (1997) reported that balance and vertical GRF are closely related It seems that the ankle and knee joints are locked in an awkward fashion at the heel contact to compensate for the imbalance. The DCP in the antero-posterior direction for the roller shoe condition was significantly less than the corresponding value for the jogging shoe condition. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the DCP for the roller shoe condition was restricted The results indicate that walking with roller shoes had little effect on temporal parameters, and loading and decay rates. It seems that there are differences in GRF characteristics between roller shoe and jogging shoe conditions. The differences in GRF pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine muscle activation patterns and joint kinematics during walking with roller shoes.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.13
no.5
/
pp.209-220
/
2013
Handover is the technology to minimize data lose of mobile devices and make continuous communication possible even if the device could be moved from one digital cell site to another one. That is, it is a function that enables the mobile user to avoid the disconnection of phone conversations when moving from a specific mobile communication area to another. Today, there are a lot of ongoing researches for fast and efficient hand-over, in order to address phone call's delay and disconnection which are believed to be the mobile network's biggest problems, and these should essentially be resolved in all mobile networks. Thanks to recent technology development in mobile network, the LTE network has been commercialized today and it has finally opened a new era that makes it possible for mobile phones to process data at high speed. In LTE network environment, however, a new authentication key must be generated for the hand-over. In this case, there can be a problem that the authentication process conducted by the hand-over incurs its authentication cost and delay time. This essay suggests an efficient key caching hand-over method which simplifies the authentication process: when UE makes hand-over from oMME to nMME, the oMME keeps the authentication key for a period of time, and if it returns to the previous MME within the key's lifetime, the saved key can be re-used.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.18
no.4
/
pp.37-42
/
2018
With advancements in digital image production technology, the branch of stereoscopic image technology has also been undergoing active development. Accordingly, research and development on cutting-edge display products for mounting stereoscopic images are currently being pursued. There are various problems that can occur when viewing 3D images. Because viewers feel visual fatigue while perceiving the depth of the images provided via an artificial method, a negative human factor such as visual fatigue has become one of the most prominent concerns, especially as it is a factor that affects the ongoing maintenance of 3D images. Therefore, by identifying the factors affecting the depth of the graphic images provided in 2D images, and subsequently using this information to develop an image processing method, we conducted depth-related experiments and analysed them under the assumption that stereoscopic images could be reproduced without visual fatigue. Thus, we analysed the most significant factors related to depth and verified the interactions by performing depth-related factors-based ANOVA variance analysis by differentially applying the texture, colour temperature, and contrast ratio to graphic images. We determined the significance of the factors related to depth and proposed a method to improve depth based on an analysis of the results of the experiments conducted in this study.
This thesis is a study on the oldest feng-shui book "Janggyeong(葬經)". Specially, it is a focus on the feng-shui orientation method so called Sasepalryongbub(四勢八龍法) in that book. This method is to identify fortune and misfortune with the directions to be measured by a feng-shui compass. Sa(四) of Sase(四勢) is the four pieces of direction of dividing 12 parts for 360 degree circle. To divide for 12 parts is related with 12-Jiji(地支). Sa mean In(寅), Sin(申), Sa(巳), and Hae(亥). Se of Sase means a large stem of mountain. Generally, Sase are the big mountain stems of the four directions as In, Sin, Sa, and Hae. Pal(八) of Palryong(八龍) mean the 8 parts of equal division for 360 degree. It is related with Palgoe(八卦) that divide for 8 parts equally. Palgoe are Jin(震), Li(離), Gam(坎), Tae(兌), Geon(乾), Gon(坤), Gan(艮), and Son(巽). Ryong(龍) of Palryong(八龍) is a stem of mountain that is measured with 8 parts of equal division feng-shui compass. Sasepalryongbub make a connection between Sase and Palryong. When they are connected, it is a good fortune like as In(寅) and Li(離), Sin(申) and Gam(坎) or Gon(坤) or Gan(艮), Sa(巳) and Tae(兌) or Geon(乾), Hae(亥) and Jin(辰) or Son(巽). It is based on two theories. The one is 12-Unseongron(運星論), the other is one of Ohaengron(五行論) as Samhap-Ohaeng(三合五行). 12-Unseongron begins from dividing all human life affairs with 12 steps. Saeng(生), Wang(旺), Myo(墓) are the very important things among 12 steps. Saeng means starting, Wang means flourishing, Myo means keeping. Samhap-Ohaeng is made with Jiji of Saeng, Wang and Myo steps about 12-Unseongron. Saeng is the most important thing among of Saeng, Wang and Myo in Sasepalryongbub which means birth. Saeng of Jiji direction can help Palgoe direction as a counterpart. Like this, the good relation of Sase and Palryong is that Jiji direction can help Palgoe direction. For example, there are In(寅) of Jiji and Li(離) of Palgoe, can be explained as these kinds of the good relations. In view of Samhap-Ohaeng, In of Jiji is regared as Saeng of fire(火). This fire- Saeng-In as Jiji can help fire- Li as Palgoe. It can be said as a good condition that Sase and Palryong be connected like this case. This is the main content of Sasepalryongbub as being treated in this study.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.25
no.1
/
pp.20-26
/
2015
Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.