• Journal of Radiation Protection and Research
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2010

With the expanded use of radiation in modern medical practices, the most important issue in regards to efforts to reduce individual exposure dose is quality assurance. Therefore in order to study the present condition of quality assurance, the Gwangju Metropolitan City area was divided into five districts each containing ten hospitals. Four experiments were conducted: a reproducibility experiment for kVp, mA, and examination time (sec) intensity of illumination; half-value layer (HVL) measurement; and beam perpendicularity test matching experiment. The tube voltage reproducibility experiment for all fifty hospitals resulted in a 95.33% passing rate and mA and examination time both resulted in a 77.0% passing rate. The passing rate for intensity of illumination was 86.0% and 52.0% for HVL, which was the lowest passing rate of all four factors. For the beam perpendicularity test matching experiment, generally the central flux is matched to within $1.5^{\circ}$. Of all fifty hospitals 30.0% were beyond $3^{\circ}$. The results of the survey showed that 58% responded that they knew about quality assurance cycle. All fifty respondents stated that they have not received any training in regards to quality assurance at their current place of employment. Although quality assurance is making relative progress, the most urgent issue is awareness of the importance of quality assurance. Therefore, the implementation of professional training focusing on safety management and accurate quality assurance of radiation will reduce the exposure to radiation for radiologists and patients and higher quality imaging using less dosage will also be possible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.164-173
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of abutment material on screw-loosening before and after cyclic loading. Among the different materials of abutments, zirconia and metal abutment were used. Material and methods: Two types of implant systems: external butt joint(US II, Osstem Implant, Korea) and internal conical joint(GS II, Osstem Implant, Korea) were used. In each type, specimens were divided into two different kinds of abutments: zirconia and metal(n=5). The implant was rigidly held in a special holding to device ensure fixation. Abutment was connected to 30 Ncm with digital torque gauge, and was retightened in 30 Ncm after 10 minutes. The initial removal torque values were measured. The same specimens were tightened in 30 Ncm again and held in the cycling loading simulator(Instron, USA) according to ISO/FPIS 1480. Cycling loading tests were performed at loads 10 to 250 N, for 1 million cycles, at 14 Hz,(by subjecting sinusoidal wave from 10 to 250 N at a frequency of 14 Hz for 1 million cycles,) and then postload removal torque values were evaluated. Results: 1. In all samples, the removal values of abutment screw were lower than tightening torque values(30 Ncm), but the phenomenon of the screw loosening was not observed. 2. In both of the implant systems, initial and postload removal torque of zirconia abutment were significantly higher than those of metal abutment(P<.05). 3. In both of the implant systems, the difference in removal torque ratio between zirconia abutment and metal abutment was not significant(P>.05). 4. In metal abutments, the removal torque ratio of GS II system(internal conical joint system) was lower than that of US II system(external butt joint system)(P<.05). 5. In zirconia abutments, the difference in removal torque ratio between the two implant systems was not significant(P>.05). Conclusion: Zirconia abutment had a good screw joint stability in the condition of one million cycling loading.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.445-452
• /
• 2010

Objectives: The aim of this study was to compare apical sealing ability and physical properties of MTA, MTA - AH-plus mixture (AMTA) and experimental Portland cement - Epoxy resin mixture (EPPC) for a development of a novel retro-filling material. Materials and Methods: Forty-nine extracted roots were instrumented and filled with gutta-percha. Apical root was resected at 3 mm and the retro-filling cavity was prepared for 3 mm depth. Roots were randomly divided into 3 groups of 15 roots each. The retro-filling was done using MTA, AMTA, and EPPC as the groups divided. Four roots were used as control groups. After setting in humid condition for 24 hours, the roots were immersed in 1% methylene blue dye solution for 72 hours to test the apical leakage. After immersion, the roots were vertically sectioned and photos were taken to evaluate microleakage. Setting times were measured with Vicat apparatus and digital radiographs were taken to evaluate aluminum equivalent thickness using aluminum step wedge. The results of microleakage and setting time were compared between groups using one-way ANOVA and Scheffe's post-hoc comparison at the significance level of 95%. Results: AMTA and EPPC showed less microleakage than MTA group (p < 0.05). AMTA showed the highest radio-opacity than other groups and the novel EPPC showed 5 mm aluminum thickness radio-opacity. EPPC showed the shortest initial and final setting times than other groups while the MTA showed the longest (p < 0.05). Conclusions: Under the condition of this study, the novel composite using Portland cement-Epoxy resin mixture may useful for retro-filling with the properties of favorable leakage resistance, radio-opacity and short setting time.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1819-1827
• /
• 2021

Land-use/cover change caused by rapid urbanization in South Korea is one of the concerns in flood risk management because groundwater recharge by precipitation hardly occurs due to an increase in impermeable surfaces in urban areas. This study investigated the hydrologic effects of land-use/cover on groundwater recharge in the Yeonje-gu district of Busan, South Korea. A statistical time series analysis was conducted with temporal variations of precipitation and groundwater level to estimate lag-time based on correlation coefficients calculated from auto-correlation function (ACF), cross-correlation function (CCF), and moving average (MA) at five sites. Landform and land-use/cover within 250 m radius of the monitoring wells(GW01, GW02, GW03, GW04, and GW05) at five sites were identified by land cover and digital map using Arc-GIS software. Long lag-times (CCF: 42-71 days and MA: 148-161 days) were calculated at the sites covered by mainly impermeable surfaces(GW01, GW03, and GW05) while short lag-times(CCF: 4 days and MA: 67 days) were calculated at GW04 consisting of mainly permeable surfaces. The results suggest that lag-time would be one of the good indicators to evaluate the effects of land-use/cover on estimating groundwater recharge. The results of this study also provide guidance on the application of statistical time series analysis to environmentally important issues on creating an urban green space for natural groundwater recharge from precipitation in the city and developing a management plan for hydrological disaster prevention.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.1-17
• /
• 2023

Purpose. The purpose of this study was to examine the correlation between the finish line designs and the marginal adaptation of nonprecious metal alloy coping produced by different digital manufacturing methods. Materials and methods. Nonprecious metal alloy copings were made respectively from each master model with three different methods; SLS, milling and casting by computer aided design and computer aided manufacturing (CAD-CAM). Twelve copings were made by each method resulting in 72 copings in total. The measurement was conducted at 40 determined reference points along the circumferential margin with the confocal laser scanning microscope at magnification ×150. Results. Mean values of marginal gap of laser sintered copings were 11.8 ± 7.4 ㎛ for deep chamfer margin and 6.3 ± 3.5 ㎛ for rounded shoulder margin and the difference between them was statistically significant (P < .0001). Mean values of marginal gap of casted copings were 18.8 ± 20.2 ㎛ for deep chamfer margin and 33 ± 20.5 ㎛ for rounded shoulder margin and the difference between them was significant (P = .0004). Conclusion. Within the limitation of this study, the following conclusions were drawn. 1. The variation of finish line design influences the marginal adaptation of laser sintered metal coping and casted metal coping. 2. Laser sintered copings with rounded shoulder margin had better marginal fit than deep chamfer margin. 3. Casted copings with deep chamfer margin had better marginal fit than rounded shoulder margin. 4. According to the manufacturing method, SLS system showed the best marginal fit among three different methods. Casting and milling method followed that in order.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.125-134
• /
• 2013

Since 2012, the local autonomous governments, under the recommendations regarding cancellation of local committees directing overly-unexecuted urban planning facilities, have tried to prove validity of such facilities. Factors such as specific standards of cancelation process, will execute policies, diversification of local conditions, connectivity to nearby facilities and possible arise of civil complaints, however, all hinder overly-unexecuted urban planning facilities from getting revitalized. Considering that these unexecuted facilities that local governments have to manage increase in number every year, the burden continuously increases for the governments due to the difficulty of setting aside budget for performing validity checks on such facilities. This research aims to analyze the criteria regarding efficient and systematic method on confirming validity of overly-unexecuted urban planning facilities, to establish into several different processes according to defined categories, and to objectify and quantify such standards. Also, using intelligent spatial information such as digital map, LiDAR data and ortho-images, spatial information analysis method suitable for reassessment was chosen and applied to execute validity analysis regarding overly-unexecuted urban planning facilities.

• The Journal of Art Theory & Practice
• /
• no.15
• /
• pp.83-109
• /
• 2013

The study mainly discusses appreciation of interactive art works seen from the perspective of play attributes that make spectators glimpse the truth of things. The general studies of interactivity, as one of remarkable features in contemporary art, are regarding the relation between the effects of digital media and interactivity as well as video games. From the preceding discussion, I analyze the effects of the appreciating interactive art works which are focused on new sensory systems, the methods to intuit the essence of the art works. Based on the concept, as I investigate the play attributes found in the interactive art works, this study gives attention to the possibility that if the spectators can reach the inherent aspects of interactive art works, while interacting them. Thus to discuss the properties of the play, this article studies play concept of Johan Huizinga(1872-1945), psychologist and anthropologist and play theory of Hans Georg Gadamer(1900-2002) who considers play as a metaphor for art. As Huizinga thinks acting is the important attribute of play, Gadamer argues whenever the term 'play' is used, we should think about 'to-and tro movement' and the movement is absence of goal as well as endlessly renews through repetition. Then what we should pay attention to, seeing the essence of art and play as similar? That is, Gadamer claims, we can understand the truth of things through the play. To apply the play concept to the interactive art works, I research the works of Maurice Benayoun(1957 - ), French interactive artist. By employing interactivity, he attempts to extend and affect the experience of his art works to one of social phenomenon. Striving this, spectators can widen and deepen the breadth of their intuition and recognize the essence of art works. It is the interactive art works that can be the apex of the transformation of structure from the play to the art. The endless repetitive process of play, which is free creation-annihilation process, is similar with the interactive experience of spectators that is variable, de-centered, and multi-sensory. The pure action of the play lets us recognize, sense and accept the world and through the system of interactive art experience, we can expand the horizons of perception. Interactive art works with these play attributes are capable of playing the role that the spectators glimpse the truth of things and experience the world around them.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.185-191
• /
• 2020

This article proposes the unified an arm's length price of transfer pricing for thin capitalization since the scope of permanent establishment has been enlarged under Digital Economy and the implementation of Blackchain system to resolve the drawback of finding an arm's length price. The rule of current thin capitalization runs against the non-discrimination of taxation of the tax treaties and the national treatment which deals fairly with goods, sercice and capital money within the country under the treaty of commerce and navigator. In addition, the information of comparable uncontrolled debt are not available of current system to prove the debt which is not subject to the rule of thin capitalization. The united an arm's length price of transfer pricing for thin capitalization can apply to foreign investment as well as domestic corporations, thereby resolving the problem of the non-discrimination of taxation of the tax treaties and the treaty of commerce and navigation. The availability of transaction level data through Blockchain platform to decide whether the debt can be subject to thin capitalization can resolve the issue of comparable uncontrolled debt transaction which can't be found in current business transactions. This article should shed light on the proposing of the unified an arm's length price of transfer pricing for thin capitalization and Blockchain system to prevent the income shifting. This propose provide implication for policymakers on current system of thin capitalization and arm's length principles.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.151-161
• /
• 2012

The purpose of this study was to build a web-server for culture heritages management information system in order to efficiently manage and safely preserve undesignated cultural properties in the Namsan area in Kyeongju, which have been neglected so far. In order to achieve this purpose, data were collected on the basis of undesignated cultural properties in the study area. To acquire the location and range GPS were used and spatial data including geographic coordinates, visual materials and structured interviews were conducted through field survey. In addition, in order to obtained reliable and accurate locations of undesignated cultural properties which are scattered, DGPS(Differential Global Positioning System) were used. The spatial database was constructed based on the standard of cultural properties and attribute data was linked to geo-spatial information(digital map and aerial photographs). This system was built in a web-server environment. The result shows detailed description on the selected output for selected location and property information can be located on the map. In particular, a database to search for the status and modification of cultural properties will provide information to the users.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.76-91
• /
• 2016

The purpose of this study is to analyze the effects of spatial characteristics, such as land cover and topography, on heat wave days from the city of Milyang, which has recently drawn attention for its heat wave problems. The number of heat wave days was calculated utilizing RCP-based South Korea climate data from 2000 to 2010. Land cover types were reclassified into urban area, agricultural area, forest area, water, and grassland using 2000, 2005, and 2010 land cover data constructed by the Ministry of Environment. Topographical features were analyzed by topographic position index (TPI) using a digital elevation model (DEM) with 30 m spatial resolution. The results show that the number of heat wave days was 31.4 days in 2000, which was the highest, followed by 26.9 days in 2008, 24.2 days in 2001, and 24.0 days in 2010. The heat wave distribution was relatively higher in agricultural areas, valleys, and rural areas. The topography of Milyang contains more mountainous slope (51.6%) than flat (19.7%), while large-scale valleys (12.2%) are distributed across some of the western region. Correlation analysis between heat wave and spatial characteristics showed that the correlation between forest area land cover and number of heat wave days was negative (-0.109), indicating that heat wave can be mitigated. Topographically, flat areas and heat wave showed a positive correlation (0.305). These results provide important insights for urban planning and environmental management for understanding the impact of land development and topographic change on heat wave.