• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.70-73
• /
• 1993

Design as well as Distortion analysis of signal conditioning filters is very useful for practical applications. Distortion analysis of digital filters for wave forms detection in ECG signals is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal FIR filters which are widely used for ECG signal processing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.187-190
• /
• 1999

In order to predict the effect of power amplifier non-linearity for digital modulated signal, this paper analyses the adjacent channel power ratio(ACPR) with the various AM-to-PM distortion levels. As the phase distortion increases from 0$^{\circ}$ to 12$^{\circ}$ at 1㏈compression point by 2.4$^{\circ}$ step, the input power level which satisfies the required ACPR decreases from 3.5㏈ to 6.5㏈ less than the 1㏈ compression input power.

• 한국음향학회지
• /
• 제24권7호
• /
• pp.416-422
• /
• 2005

디지털 통신 시스템에서의 음성 인식은 음성 부호화기에 의한 음성 신호의 왜곡으로 인하여 성능이 크게 저하된다. 본 논문에서는 음성 부호화기에 의한 스펙트럼 왜곡을 분석하고 왜곡된 주파수 정보를 보상하는 전처리 과정을 통하여 음성 인식 성능을 향상시키는 방법을 제안한다. 현재 널리 사용되는 표준 음성 부호화기인 IS-127 EVRC, ITU G.729 CS-ACELP. IS-96 QCELP를 사용하여 부호화에 의한 왜곡을 분석하고, 모든 음성 부호화기에 공통으로 적용하여 왜곡을 보상할 수 있는 전처리 방법을 개발하였다. 본 논문에서 제안하는 왜곡 보상 방법을 세 종류의 음성부호화기에 각각 적용하였으며, 왜곡된 음성 신호에 대한 음성 인식률에 비하여 최대 $15.6\%$의 인식률 향상을 얻을 수 있었다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1847-1853
• /
• 2014

이동통신 시스템의 OFDMA 방식은 신호에 대한 PAPR(Peak to Average Power Ratio) 값의 증가를 가져왔다. 이동통신 시스템 전력 소모의 대부분을 차지하는 전력 증폭기에 대한 효율 개선은 매우 중요한 핵심 기술이다. 전력 증폭기의 선형 특성 개선을 위해 디지털전치왜곡 기술을 사용하였으며, 전력 증폭기의 효율 개선을 위해 비대칭 도허티(Asymmetric Doherty) 방식을 사용하였다. 본 논문에서는 기존 비대칭 도허티 구조와 다른 새로운 구조의 비대칭 도허티 구조를 제안하였다. 제안하는 새로운 구조의 비대칭 도허티 방식에서는 전력 증폭기 구동단을 주경로와 첨두경로로 분리하였으며, 위상 변환기를 이용하여 도허티 증폭기의 전력 결합 특성을 개선하였다. 또한 구동단 첨두 증폭기 gate bais에 대한 포락선 추적 기술을 적용하여 효율을 개선하였다.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1833-1842
• /
• 2016

In grid-connected converter control, grid voltage feedforward is usually introduced to suppress the influence of grid voltage distortion on the converter's grid-side AC current. However, owing to the time-delay in control systems, the suppression effect of the grid voltage distortion is seriously affected. In this paper, the positive effects of the grid voltage feedforward control are analyzed in detail, and the time-delay caused by the low-pass filter (LPF) in the voltage filtering circuits and digital control are summarized. In order to reduce the time-delay effect on the performance of the feedforward control, a voltage feedforward control strategy with time-delay compensation is proposed, in which, a leading correction of the feedforward voltage is used. The optimal leading step used in this strategy is derived from analyzing the phase-frequency characteristics of a LPF and the implementation of digital control. By using the optimal leading step, the delay in the feedforward path can be further counteracted so that the performance of the feedforward control in terms of suppressing the influence of grid voltage distortion on the converter output current can be improved. The validity of the proposed method is verified through simulation and experiment results.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.890-898
• /
• 2014

Critical conduction mode boost power factor correction converters operating at the boundary of continuous conduction mode and discontinuous conduction mode have been widely used for power applications lower than 300W. This paper proposes an enhanced variable on-time control method for the critical conduction mode boost PFC converter to improve the total harmonic distortion characteristic. The inductor current, which varies according to the input voltage, is analyzed in detail and the optimal on-time is obtained to minimize the total harmonic distortion with a digital controller using a TMS320F28335. The switch on-time varies according to the input voltage based on the computed optimal on-time. The performance of the proposed control method is verified by a 100W PFC converter. It is shown that the optimized on-time reduces the total harmonic distortion about 52% (from 10.48% to 5.5%) at 220V when compared to the variable on-time control method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.225-229
• /
• 1997

This paper describes the camera calibration based-neural network with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes and inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. Thin prism distortion arises from imperfection in lens design and manufacturing as well as camera assembly. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing. The performance of proposed camera calibration is illustrated by simulation and experiment.

• 한국항공우주학회지
• /
• 제42권10호
• /
• pp.809-815
• /
• 2014

큰 온도 변화를 받는 이종 접합 복합재는 재료의 서로 다른 열팽창 특성으로 인해 열에 의한 형상 왜곡이 발생되기 쉽다. 성형 과정에서 이종 접합 복합재 구조물의 제작 공정 중의 형상 왜곡 현상을 고려하기 위해서 구성하는 각각의 복합재료들에 대한 열팽창 특성 분석이 우선적으로 요구된다. 본 논문에서는 Carbon/Epoxy와 Silica/Phenolic의 이종접합 복합재료 시편의 열변형 특성을 측정하기 위해 디지털 영상 상관 기법(DIC)을 활용하였다. 이종 접합 복합재 시편의 열변형에 대해 수치 해석을 수행하였고 이를 실험 결과와 비교하였다. 수치해석을 통한 예측 결과는 실험을 통하여 입증되었다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.373-378
• /
• 2003

This study deals with development of transformation tool for transformation of digital map coordinates systems using by the best fit transformation parameters which are determined between the local geodetic datum and geocentric datum (ITRF2000) in Korea and distortion modelling derived from collocation method. We used 107 control points as a common points. For analyzing the derived parameters, another 83 common points are tested. Finally, the best fit parameters are determined from Molodensky-Badekas model after considering the RMSE, maximum value, minimum values, and 95% confidence interval of residuals. after transformation of best fit parameters and distortion modelling, we could develop transformation tools with advenced accuracy. so it is possible to perform on transformation of digital map with scale 1:5,000. and we tested accuracy eveluation through analysis between transformation results and field results of GPS observation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1265-1268
• /
• 1996

This paper describes a new pulse width modulation (PWM) scheme suitable for microprocessor-based PWM inverters. Optimal switching patterns minimizing the performance index corresponding to the distortion factor are decided in real time by numerical calculation using the microprocessor-implemented control system. This PWM method is compared with conventional methods, such as the natural PWM and the direct PWM. Harmonic analysis using digital simulations shows that the proposed PWM scheme has much less low-order harmonics than the other methods. The validity of this method is verified in experiments using a microprocessor-based control system, where a 16-bit single-chip microcontroller, Intel 80c196kc is used.