• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.212-218
• /
• 1987

The error rate equations of digital modulatuon techniques(M-ary PSK MSK Multi-level QAM) have been derived in the environment of Qaussian noise and Jamming And the results are shown in the figures as parameters of carrier power to noise power ration(CNR) carrier power to Jamming power ration(CJR) Jamming power to carrier power ration(JCR) alteration figure of envelope of Jamming(M) As the results of analysis the system performance is more degreeded by Qau-ssian Famming than Tone Famming In case that envelope of Famming has m-distribution, the s/stem parformance is desreeded in the deep alteration of envelope

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.103-106
• /
• 2002

This paper has studied a remote AMR(Automatic Meter Reading) system using the power line and the telephone line as a communication media and the digital power meter. In the developed system, because we have used the power line and telephone, the facility is very easy and then its cost is not expensive. The system includes following elements: a digital power meter, an indoor communication system using a power line modem and a telephone line interface system for sending data to the utility company.

• 디지털산업정보학회논문지
• /
• 제4권1호
• /
• pp.17-24
• /
• 2008

This paper describes the measurements that provide a characterization of the code-domain channels of a CDMA base station transmitter. One of the measurements, called code-domain power(CDP), provides the distribution of power in the code domain channels. This measurement can be used to verify that the various channels are at expected power levels and to determine when one code channel is leaking energy into the other code channels. We develop module of CDP measurement in the CDMA system.

• 전기의세계
• /
• 제30권8호
• /
• pp.509-516
• /
• 1981

The optimal control theory is applied to the design of a digital control system for a nuclear reactor. A linear dynamic model obtained at 85% of rated power and a quadratic performance index are used. A minimal order observer used in cascade with the feedback controller is suggested as a state estimator. The total reactor power control is studied in the range of 80% to 100% of rated power, with the steady state and load-following control. The control algorithm considered is suitable for implementation in direct digital control.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.314-317
• /
• 2002

본 논문에서는 디지털 가버너를 개발후 유효성 검증을 위해 성능평가를 위한 방법들을 제시하고, 현장 적용시에 발생할 수 있는 시행착오를 줄이는 방법의 일환으로 시뮬레이션을 통한 검증방법에 대해 다룬다. 유전알고리즘과 모델 조정기법에 의해 대상 모델을 동정하였고 완성된 모델과 실제시스템의 출력 데이터를 비교하여 유효성을 검증하였다. 한강수력발전소 섬진강수력발전소 2호기에 설치되어있는 기존 기계식 조속기를 개발된 디지털 조속기로 대체하여 현장에 적용하고, 제어기 파라 미터의 성능평가를 위해 테스트를 수행하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권1호
• /
• pp.17-28
• /
• 2003

Digital technology has advanced very significantly over the years both in terms of software tools and hardware available. It is now applied extensively in many area of electrical engineering including protective relaying in power systems. Digital relays based on digital technology have many advantages over the traditional analog relays. The digital relay is able to do what is difficult or impossible in the analog relays. However, the complex algorithms associated with the digital relays are difficult to test and verify in real time on real power systems. Although non real-time simulators like PSCAD/EMTDC are employed to test the algorithms, such simulations have the disadvantage that they cannot test the relay dynamically. Hence, real-time simulators like RTDS are used, but the latter needs large space and it is very expensive. This paper uses EMTP MODELS to simulate the power system and the distance relay. The distance relay algorithm is constructed and the distance relay is interfaced with a test power system. The distance relays performance is then assessed interactively under various fault types, fault distances and fault inception angles. The test results show that we can simulate the distance relay effectively and we can examine the operation of the distance relay very closely including debugging by using EMTP MODELS.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.213-221
• /
• 2007

A digital state feedback control method for the current mode control of DC-DC converters is proposed in this paper. This approach can precisely achieve interleaved current sharing among the converter modules. As the controller design and system analysis are performed in the time domain, the proposed method can easily satisfy the required converter specification by using the pole placement technique. The digital state feedback controller in the continuous and discrete time domain is derived for the robust tracking control. For the verification of the proposed control scheme, a parallel module bi-directional converter in a prototype 42V/14V hybrid automotive power system, which is a design example in the continuous time domain, and a parallel module buck converter, which is a design example in the discrete time domain, are implemented using a TMS320F2812 digital signal processor (DSP).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.2947-2949
• /
• 1999

The MX-13 digital multiplexer for leased line is one of the main facilities, so it is periodically monitored by the operator. Operators connect dummy terminal to the MX-13 digital multiplexer manually, and execute preventing inspection. When alarms occurred, they are manually checked by the operator. But, in order to get mere efficiency of accident prevention and monitoring facilities with rapid response to the accident symptom, and to get higher reliability from the companies who lease communication lines, we need to construct this system which is adequate to monitor IvlX-13 digital multiplexer in almost real time. We construct remote monitoring system for MX-13 digital multiplxer to meet those requirement. After constructing the system, it's possible that the local operator can manage local monitoring system to check the status of MX-13 digital multiplexers. Also, Center operator can monitor the facility which has problems, and located in the specific local areas with the use of Center monitoring system.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.42-48
• /
• 1994

In this paper, a low power and high speed flash Analog-to-Digital Converter using current-mode concept is proposed. Current-mode approach offers a number of advantages over conventional voltage-mode approach, such as lower power consumption small chip area improved accuracy etc. Rescently this concept was applied to algorithmic A/D Converter. But, its conversion speed is limited to medium speed. Consequently this converter is not applicable to the high speed signal processing system. This ADC is fabricated in 1.2um double metal CMOS standard process. This ADC's conversion time is measured to be 7MHz, and power consumption is 2.0mW, and differential nonlinearity is less than 1.14LSB and total harmonic distortion is -50dB. The active area of analog chip is about 350 x 550u$m^2$. The proposed ADC seems suitable for a single chip design of digital signal processing system required high conversion speed, high resolution small chip area and low power consumption.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.248-255
• /
• 2014

Nuclear power plants may use commercial grade items if they can pass special tests or inspections, which is called Commercial Grade Item Dedication (CGID). Digital items, however, should follow EPRI TR-106439 to be applied to nuclear power plants. This paper explains the scheme and requirements of the EPRI TR-106439 and introduces some guidelines. Firstly, in order to clarify requirements of the EPRI TR-106439, code interpretation is performed. And through case study of digital indicator, limitations of EPRI TR-106439 are mentioned, and improvement direction is proposed.