• 패션비즈니스
• /
• 제21권3호
• /
• pp.14-28
• /
• 2017

This purpose of this study to analyze effect material properties have on change in QR code recognition rate according to change of materials by comparing recognition rate of color QR code. QR code applied to textile materials has the advantage of being washable and being applicable to lost child prevention goods or clothes or a person with dementia through record of information relating to the material or input of additional information, differently from QR code printed on the conventional paper. An effective method of entering QR code in textile materials is Digital Textile Printing(DTP), that facilitates printing by rapidly applying diverse information, and small quantity production. It is possible to tailor various QR codes according to use. Regarding samples to use, cotton material used in clothing products and Tyvek material recently applied to clothing and related products were selected. Reactive dyes were used for cotton, pigment was used for Tyvek, and QR code was printed with an inkjet printer by direct printing method. Printing methods and surface textures are different between cotton and Tyvek. It was revealed that consequent print results and results of recognition rate were different. Regarding color to be printed, 2015 S/S - 2017 S/S color presented by Pantone was used. Color combination affected recognition rate of color QR code. Understanding color combination, material properties and print characteristics may be helpful in increasing recognition rate of color QR code, and may contribute to usability of color QR code applied to textile materials in the future.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.261-272
• /
• 2014

Home appliances go through a couple of packaging stages from the plant to consumers. The primary packaging, inner packaging for each part, happens for protection after products leave the plant. The secondary packaging happens in the unit of product, ensuring cushioning packaging to protect products from movement. The final tertiary packaging is for transportation and delivery. Each stage of product packaging, however, costs a lot of money because of disposable packaging materials used in each stage including vinyl, tapes, Styrofoam, and corrugated cardboards. Discarded packaging materials also cause environmental problems. In an effort to come up with a measure to solve those problems, this study proposed a plan to minimize logistics costs with semi-permanent packaging materials to replace disposable ones including Styrofoam, vinyl, and corrugated cardboards in the stages of inner packaging, cushioning packaging, product unit-based packaging, and transportation. The study also developed a model to cut down logistics costs by reducing various packaging stages including the primary, secondary, and tertiary stage only to the secondary one through module-type products instead of the transportation- and delivery-type ones, as well as demonstrated the excellence of the study through numerical analysis.

• Corrosion Science and Technology
• /
• 제3권5호
• /
• pp.194-197
• /
• 2004

The corrosion resistance of several kind of ME (Metal Evaporated) tape has been investigated both in mild sulfuric acid solution and NaCl solution by electrochemical impedance spectroscopy. It was found that the degradation of ME tapes was accelerated with increasing the concentration of sulfuric acid. There was no significant change in corrosion resistance when the concentration of NaCl was under 3.5 wt%. However, the impedance value decreased when the concentration of NaCl was up to 10 wt%. The degradation of backside of ME tapes was also investigated by AC impedance measurements. The results showed that the impedance behavior of backside plastic film changed with the concentration of sulfuric acid even at the beginning of immersion, implying the changing of the permeability for the backside of ME tapes. It was also found that the corrosion resistance of DVC (Digital Video Cassette) ME tape was better that that of Hi-8mm ME tapes in sulfuric acid solutions. Also, the backside of DVC ME tape showed better water resistance than that of Hi8 ME tapes.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.933-939
• /
• 2008

본 논문에서는 고속 디지털 회로에서 발생하는 SSN(Simultaneous Switching Noise)을 억제하기 위한 자성 재료가 적용된 복합형 EBG(Electromagnetic Bandgap) 구조의 전원면을 제안하였다. 제안된 EBG 구조는 정사각형 패치와 나선형 선로로 구성된 단위 셀이 주기적으로 연결되어 있으며, 자성 재료는 EBG 구조의 단위 셀 위에 국부적으로 적용되었다. 자성 재료의 투자율 실수 성분은 EBG 단위 셀 사이의 유효 인덕턴스를 중가시켜 밴드갭을 낮은 주파수로 이동시키고, 자성 손실 특성을 갖는 허수 성분은 단위 셀 사이에서 야기되는 기생 LC 공진의 피크값을 낮춘다. 그 결과 제안된 구조는 기존 EBG 구조에 비해 낮은 차단 주파수 특성을 가지며, -30 dB 저지 대역을 기준으로 175 MHz에서 7.7 GHz까지 넓은 억제 대역폭을 나타냈다. 제안된 구조는 전원 무결성 개선 및 EBG 전원면 소형화에 크게 기여할 것으로 기대된다.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.360-368
• /
• 2022

PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

• 센서학회지
• /
• 제24권4호
• /
• pp.228-231
• /
• 2015

Ultrasonic motors provide high torques and quick responses compared to their magnetic counterparts; therefore, they are widely used in small-scale applications such as mobile phones, microrobots, and auto-focusing modules in digital cameras. To determine the feasibility of lead-free piezoceramics for ultrasonic motor applications, we fabricated a ring-type piezoceramic with a KNN-based lead-free piezoceramic (referred to as CZ5), intended for use in an auto-focusing module of a digital camera. The vibration of the lead-free stator was observed at 45.1 kHz. It is noteworthy that the fully assembled lead-free ultrasonic motor exhibited a revolution speed of 5-7 rpm, even though impedance matching with neighboring components was not considered. This result suggests that the tested KNN-based piezoceramic has great potential for use in ultrasonic motor applications, requiring minimal modifications to existing lead-based systems.

• 한국의상디자인학회지
• /
• 제25권2호
• /
• pp.135-150
• /
• 2023

The purpose of this study is to understand the formative characteristics of futuristic virtual fashion revealed in virtual fashion platforms targeting the human body. First, the current status of fashion in the metaverse and futurist fashion were reviewed and summarized by referring to prior research. Next, among the items posted on DRESSX, "futurism" was searched and those resturning a positive result were collected as research subjects. The characteristics were organized into design elements: colors, shapes, materials, and patterns. Futuristic aesthetic characteristics were derived from the characteristics of each design element. As a result, color showed the characteristics of achromatic, vivid and neon colors, multi-color and gradation, multi-color due to reflected light, and color conversion. As for the form, a body-concious look or exaggerated silhouettes, spatial expressions in geometric structures, forms imitating living things, and fluid silhouettes using clouds were prominent. Materials showed the digitization of universal clothing materials, application of industrial materials, use of metal materials, and unrealistic materials. In the patterns, geometric abstract patterns, patterns that reveal the digital world view, and moving fluid patterns appeared. The aesthetic characteristics of futurism in virtual fashion were revealed in four categories: visual dynamics, high-tech sensibility, variability, kineticisim. Visual dynamics were revealed in geometric forms, and intense neon colors. High-tech sensibility was prominent in the use of metal and industrial materials, light emission, and patterns of the digital world view. The expression of multiple colors by reflected light and the change showed the variability of futurism. The use of unrealistic materials, such as clouds and fire and fluid silhouettes expressed kineticisim. The infinite expressiveness of virtual fashion made it possible to actively express the aesthetic characteristics of futurism.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 하계학술연구발표회 논문개요집
• /
• pp.26-26
• /
• 2005

• 한국실내디자인학회논문집
• /
• 제19권4호
• /
• pp.39-47
• /
• 2010

As various materials and new methods can be used due to developments in science and expansion of thinking, modern architectural color composes extensive possibilities exceeding its physical role of the past. In particular, rather than the initial external expression, the secondary connotative interpretation is more important in interpreting architectural color. This is because color interpretation changes the meaning of space based on light. Also, the development of digital technology has shifted the use of architectural color from passive realization to a more proactive concept and value. In other words, such shift leads to a new discussion on architectural color such as non-representation, invisibility, and non-physicality as the concept of fixed time, space and movement has been weakened. This paper begins by conceptualizing the digital space, a term widely used to interpret the architectural color of digital space. And it will be categorized as non-representational architectural color, invisible architectural color, and non-physical architectural color, by combining the characteristics of digital space with the modern architecture's color examples. Digital space overcoming the space time is differently interpreted from the past color expression. Modern architecture's color which substitutes the passive view with active body takes a role delivering various axes of discussions with synaesthesia.

• 한국도서관정보학회지
• /
• 제30권1호
• /
• pp.119-150
• /
• 1999

종래의 전통적 대학도서관은 인터넷 기술의 발달로 인하여 새로운 형태의 디지털 라이브러리로 변모하고 있다. 인쇄자료는 국제교환표준문서 표준 디지털 파일로 목록은 메타데이터로 이용자는 네트워크가 접속되는 전세계 이용자로, 자료는 무한정 복사가 가능한 형태로 바뀌고 있다. 국가 정보 하부구조를 위한 대학도서관 디지털 라이브러리 구축은 미래 정보화사회에 매우 중요한 것으로 본 논문에서는 기존의 디지털 라이브러리 기술에 대한 분석을 통하여 기하급수적으로 발생하는 전자문서를 관리하는 문제, ISO에서 문서 교환표준으로 제정한 SGML 문서의 구조 둥 앞으로 추진할 디지털 라이브러리의 모습을 모델링한다.