• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.73-80
• /
• 2012

Generally, the phase control dimmer has been widely used due to simple interface and easy handling. However, the electrical characteristics are not good for the method in which the phase control dimmer cuts the input voltage. This paper has researched about DALI(Digital Addressable Lighting Interface) controller, that is the digital lighting control method, and implemented DALI protocol satisfied with the IEC-62386 standard. In addition, the existing phase control dimmer was used as the controller of DALI and not only individual control but also group control was possible. And the performance was proved to be good by applying our theory to 30[W] LED lighting control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.113.3-113
• /
• 2001

In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.3
• /
• pp.26-36
• /
• 1989

Recently digital governor system is commonly adapted for the speed control of the marine diesel engine because of too much fluctuation of rpm resulted by the low speed, long stroke, high efficiency and a small number of cylinder of it, and versatile studies on the development of digital governor system are progressed. On this subject the new control method in which the fuel is controlled by feedforwarding the change of load as well as the feedback of angular velocity in case of disregarding the engine dead time and influence of scavenging air was proposed by the authors, and found the method has shown quite a good control performance in comparision to the conventional control method by the simulation using a digital computer for various load change. In this paper the speed control system of a diesel engine is simulated in case of regarding the engine dead time by the proposed method, and also confirm a good control performance of it under even more realistically simulated environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.187-193
• /
• 2012

An image authentication scheme for gray scale image through embedding a digital watermark by quantization of Integer Wavelet Transform (IWT) coefficients of the image is proposed in this paper. Proposed method is designed to detect modification of an image and to identify tampered location of the image. To embed the watermark mid-frequency band of a second level IWT was used. An approximation of the original image based on LL band was stored in LSB bits of the pixel data as a recovery mark for restoration of the image. Watermarked image has achieved a good PSNR of 40 dB compared to original cover image. Restored image quality was also very good with a PSNR of more than 35 dB compared to unmodified watermarked image even when 25% of the received image is cropped. Thus, the proposed method ensures a proper balance between the fidelity of the watermarked image and the quality of the restored image.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.105-112
• /
• 1998

In this paper, several bandwidth sampling methods were compared using experimental result in which contains "multi-order sampling", which was proposed for envelope detections in RF ultrasonic signals. A "Quadrature sampling method" and "Second-order sampling method" were compared with it. The resultant image of second-order sampling method introduces too much error as compared with the result of quadrature sampling. But Multi-order sampling method, specialy 5-th sampling method showed quite good envelope detection property. This means that more economical and quite good performance digital beamforming system can be built by adopting this multi-order sampling method.s multi-order sampling method.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.1
• /
• pp.24-32
• /
• 2021

Dental implant have been in use for a long time to restore at missing tooth. But, To place dental implant at good position very is difficult. Improperly positioned dental implants make some problems to have a good function of dental implant. so, To place dental implant at accurate position is the most important step throughout the whole process. Digital guided system of dental implant is very useful to have a accurate position of dental implant and it makes upper restoration more esthetic and funcional.

• Fourth Industrial Review
• /
• v.2 no.1
• /
• pp.33-43
• /
• 2022

Purpose - With the rapid development of information technology, the digital economy has become an important grip of the new development pattern, and the digital transformation of enterprises is a major trend. As SMEs are the mainstay of the economy and employment, it is important to study the digital transformation of SMEs to promote the development of the digital economy. Research design, data, and methodology - Based on a resource-based view, this report analyses the current situation and issues of digital transformation of SMEs from the perspective of digital orientation as well as the breadth and depth of technological capabilities of enterprises, using data from a survey of 200 manufacturing enterprises in China. Result - The results show that SMEs generally have a digital transformation mindset, but a weak digital foundation. In order to execute a digital strategy, companies need digital transformation capabilities. These behavioral capabilities are guided by the strategic direction of the business, and companies with strong capabilities are always trying to tap into the full digital potential. Conclusion - In order to effectively promote the digital transformation of SMEs, we suggest that SMEs pay attention to digital capability building, make good use of digital platforms and network resources, and lay a solid foundation for digital transformation; meanwhile, we suggest that government departments play a guiding and supporting role to build a cross-industry and cross-sector digital synergy system to help promote the development of SMEs' digital transformation. This paper presents some suggestions from both the internal and external environment of the enterprise, with the expectation of contributing to the digital transformation practices of SMEs.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2005.04a
• /
• pp.147-161
• /
• 2005

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.461-465
• /
• 2010

This paper describes the design method of Time-to-Digital Converter(TDC) to obtain the constant delay time and good reliability. The reliability property is described with delay elements. In TDC the time signal is converted to digital value which is based on delay elements for the time interpolation. To obtain the constant delay time, the first and the last delay elements have different structure compared to the middle delay elements. In the first and the last delay elements, the driving ability could be controlled for the different delay time. The delay element can be designed by analog and digital devices. The delay time of the element using analog devices is not sensitive to process parameters than that of the element using digital devices. And the TDC circuit by the elements using analog devices shows better reliability than that by the elements using digital devices also.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.134-138
• /
• 2023

The field of digital forensics requires good theoretical and practical knowledge, so practitioners should have an in-depth understanding and knowledge of both theory and practical as they need to take decisions which impacts human lives. With the demand and advancements in the realm of digital forensics, many universities around the globe are offering digital forensics programs, but there is a huge gap between the skills acquired by the student's and the market needs. This research work explores the problems faced by digital forensics programs, and provides solution to overcome the gap between the skills acquired by the student's and the market needs using Activity led learning pedagogy for digital forensics programs.