• 전기학회논문지P
• /
• 제55권4호
• /
• pp.161-166
• /
• 2006

In this paper, an automatic lighting control system is developed using microprocessor. The developed system consists of a digital lighting control unit, an analog lighting control unit, and a lighting control simulator. In the developed system, ATMega128 is used as the main controller. The developed digital lighting control unit consists of eight modules and the developed analog lighting control unit consists of six modules respectively. Additional, the developed simulator consists of a digital and an analog lighting control simulation using graphic user interface. And so this developed system can be applied to the controller design of the interior and exterior lighting equipment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.563-566
• /
• 2003

We have designed the power control unit which belongs to the power cabinet and controls the power supplied to Control Rod Drive Mechanism(CRDM) as a digital system based on Digital Signal Processor(DSP). The power control unit dualized as the form of Master/Slave has had its increased reality. The Central Process Unit(CPU) board of a power control unit possesses two Digital Signal Processors(DSPs) of the control DSP for performing the tasks of power control and system monitoring and the communication of the Control DSP and the Communication DSP. To accomplish the functions requested in the power control unit effectively, we have installed Field Programmable Gate Arrays(FPGAS) on the CPU board and have FPGAs perform the memory mapping, the generation of each chip selection signal, the giving and receiving of the signals between the power controllers dualized, the fault detection and the generation of the firing signals.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1304-1308
• /
• 2005

This paper presents the case that the existing analog control systems were retrofitted with digital DCS(Distributed Control System)s for boiler unit in thermal power plant. Replacement of existing worn-out or obsolete analog control systems has been considered. Replacement of existing analog control systems with another analog control systems has lots of difficulties in maintaining the systems due to being out of stock. Due to those difficulties, existing analog control systems have been retrofitted with digital DCSs in many industrial sites. KEPRI(Korea Electric Power Research Institute) accomplished the project that retrofitted analog control systems with the developed DCSs for boiler unit in middle-scale coal-fired thermal power plant. The benefits of an upgrade to digital control include a increase of reliability due to system redundancy, ease of modifying the control logic and the parameters of function block, ease of maintenance due to available spare parts, improvement of information display, ease of modifying MMI(Man Machine Interface) displays, a increase in system availability, and improvement of control performance. This paper describes how to use the parameters of existing analog controllers, the implementation of digital PID controller, control system configuration for boiler unit in thermal power plant, some boiler control loops, control result during commissioning, and the comparison of boiler characteristic test data after retrofitting with the existing test data.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.121-130
• /
• 2008

This paper introduces a design and implementation of a digital control unit for an Oxygenaire Servo Baby Incubator. The control unit is designed and implemented according to international standards. The control unit is based on an AVR Atmel microcontroller unit. It is built for monitoring and control and displays the three main temperature values: set point temperature, baby skin temperature and air temperature. User friendly software is implemented. The implemented control unit was tested in the laboratory as well as in the field. The control unit is sensitive to change of $0.1^{\circ}C$. At startup, based on a unique control strategy, the incubator reaches its steady state in about 14 minutes. The system schematic diagrams are shown in the paper. Also, programs flow charts are presented. The control unit was designed and implemented based on a contract between the Electronics Research Institute (ERI) and ENGIMED Company. The authors would like to thank ERI and ENGIMED for introducing all required finance and shoring to complete this work.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.498-503
• /
• 2005

Turbine Load Set Motor장치는 노후화 된 화력 발전소에서 출력 부하를 결정하는 중요한 장치로서, Motor를 가변하면서 발전 출력 부하를 조정하게 된다. 이러한 종래 발전시스템에서는 Set Up Range를 운영자가 수동으로 조작한 Set Up값에 따라 Motor를 회전시키게 되며, Motor를 포함한 내부적 동작에 의해서 발전 출력 부하 결정이 이루어지게 된다. 따라서 본 논문에서는 수동적으로 출력부하를 작동되는 Turbine Motor Drive Unit를 대처할 수 있는 Digital Drive Unit 장치를 개발하여 기존 Turbine Load Set Motor 성능을 지닐 수 있는 장비를 구현한다. 또한 구현한 Digital Drive Unit을 바탕으로 발전 출력 부하를 결정하는 기본 기능을 기존 Motor Drive Unit과 연결하여 작동될 수 있도록 제어 알고리즘 구현과 구현된 제어 시스템을 통해 기존 Turbine Load Set Motor Drive와 연결 가능성을 확인한다.

• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.63-70
• /
• 2003

본 논문에서는 반도체 제조장비의 핵심 부품 중에 하나인 질량유량제어기(MFC, Mass Flow Controller)클 설계하고 구현하였다 Microchip社의 마이크로콘트롤러(Microcontroller) PIC 16F876을 사용하여 개발된 MFC는 여러가지 문제점을 가진 아날로그(Analog) 방식의 MFC와 고가의 DSP(Digital Signal Processor) 및 고분해능의 AD변환기(Analog to Digital Convertor)를 사용하는 디지털 MFC의 장점을 혼합한 하이브리드형(Hybrid-Type)이다. 본 논문에서 개발된 MFC는 크게 센서부(Sensor Unit), 제어부(Control Unit), 구동기부(Actuator Unit)로 구성되었으며, 성능향상을 위한 자동보정(Automatic Calibration) 알고리즘과 표준테이블(Reference Table) 방식을 사용하였다.

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.2003-2008
• /
• 2012

LED는 기존 광원에 비하여 낮은 전력 소모량과 긴 수명, 작은 크기 등의 장점으로 예상보다 더 큰 성장을 가져올 것이라는 전망도 있다. LED 조명시스템에서 LED를 동작시키기 위해서는 구동 시스템이 필요하다. 대용량에서는 Switched Mode Power Supply (SMPS)가 Linear Regulator 보다 효율이 높기 때문에 주로 사용되고, 아날로그 방식 혹은 디지털 방식으로 이를 제어하고 있다. 디지털 제어방식는 중앙처리장치인 MCU나 DSP가 기존의 아날로그 제어 칩에 비해 단가가 비싸기 때문에, SMPS 시장에 진입이 쉽지 않았다. 하지만 LED 조명시스템처럼 하나의 MCU안에 다양한 디지털 제어 기능들을 통합시켜 전체 시스템을 구현함으로써 이득을 취할 수 있다. 본 논문에서는 이러한 디지털 제어방식을 적용함에 있어 저가형 MCU를 이용하여 LED 구동 전류를 개선할 수 있는 알고리즘을 제안하고자 한다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.167-169
• /
• 2010

추진시스템 전자 제어장치는 추진시스템 내부의 각종 센서신호를 입력 받아 신호처리를 통해 제어알고리즘을 수행하는 장치이다. 기존의 아날로그 센서를 이용한 시스템에서는 센서와 전자제어장치의 전송에 의한 영향으로 신호감쇄가 일어나고 노이즈에 민감한 단점이 있었다. 디지털센서는 센서와 AMP, AD Converter가 하나의 모듈 안에 포함되어 있어 전송선에 의한 영향을 감소시킬 수 있으며, 전자제어장치에서 별도의 S/W 필터를 적용할 필요가 없어 제어 알고리즘의 수행시간을 단축시킬 수 있다. 본 논문에서는 디지털센서를 사용한 전자제어장치의 회로설계 및 제어알고리즘 적용에 따른 신호처리 방안에 대한 내용을 기술하였다.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.55-60
• /
• 2014

Today, there is increasing the elderly population in rural community, and people of returning from the urban to the rural community are demand to be of high value-added agriculture. In this time, there are required to regularization, standardization, automation, for getting of production of high value crops. In this paper, we are study for automation cultivation control system design for produce high-value crops. this system were designed of two parts that one part is measure and control unit, another part is server part for database and server side control. the main controller for measurement and control is used MC9S08AW60, server for Database and server-side control was using MySQL with CentOS. The source code of control program was coding C and compile with GCC. the functions of measurement and control unit are digital input and output each 8channels and can be scan-able of 20 Bit with 2CH/Sec. Analog Output were designed that can be output of 4-20mA or 0-5V on 4channel. The Digital input and output part were designed 8-channel, and using the high speed photo coupler and relays. We showed that system is possible to measure a 20bit data width, 2Ch/sec as 8 channel analog signals.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.57-61
• /
• 2006

As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.