• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.183-185
• /
• 2003

Spatially referenced mobile mapping (MM) images contain rich information of man-made objects , e.g. road centerlines, buildings, light poles, traffic signs ,billboards and line trees etc. Therefore, the applications in transportation, urban 3D reconstruction, utility management are implemented increasingly. It’s a fundamental issue lies in MM image process that how to orient this image in the object space including interior orientation of camera and the exterior orientation of image. In this paper, the algorithm of automatic acquirement of DC (Digital Camera) parameters based on MM images is illustrated. And then, the mapping between image space and object space for MM images is described.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.171-182
• /
• 1998

An automated surface-strain measuring system using the image processing technique is developed in the present study, which consists of the hardware to capture and to display digital images, and the software to calculate the 3D informations of grid points from two views. New or improved algorithms the mapping and establishing correspondence of grid points and elements, the camera calibration, and the subpixel measurement of grid points, are implemented. As an application of the present system the surface-strains of deformed blanks in the limitting dome height test, the square cup deep-drawing and punch stretching to obtain the forming limit diagram are measured. The results are compared with those obtained by conventional manual methods.

• Journal of Korea Water Resources Association
• /
• v.30 no.5
• /
• pp.539-548
• /
• 1997

A physically based model for rainfall runoff simulation in agricultural watershed equipped with tile drains is presented. This model is developed from the TOPMODEL which is based on the detailed topographic information provided by Digital Elevation Model (DEM). Nine possible flow generation scenarios in the tile drained basin are suggested and used in the development of the model. The model can identify the portions of the hydrograph resulting from tile flow, subsurface flow and surface flow. The performance of the model is assessed through a calibration and validation process. The results of the analysis show that the model describes the physical system well and provides a better insight into the hillslope hydrology of agricultural watersheds with tile drainage.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.18-21
• /
• 2021

This paper analyzes the distortion correction of the in the micro DMD(digital micro mirror device) projector system using 0.25 or less optical throwing distance ratio. The distortion of projected image occurs depending on the performance of the optical lens, the installation location of the projection system, and the tilt of the screen. This study analyzed the physical tilt values influencing of the distortion of projected image, removed the tilt distortion of throwing distance ratio optical lens, and adjusted the distortion image by the simulation of calibration displacements. The results of this study demonstrated within 5% TV distortion reference. Moreover, the correction method reduced the pin-distortion correction of projection system.

• Journal of the Korea Society for Simulation
• /
• v.31 no.1
• /
• pp.29-41
• /
• 2022

As one of the alternatives to solve the problem of unstable food supply and demand imbalance caused by abnormal climate change, the need for plant factories is increasing. Airflow in plant factory is recognized as one of important factor of plant which influence transpiration and heat transfer. On the other hand, Digital Twin (DT) is getting attention as a means of providing various services that are impossible only with the real system by replicating the real system in the virtual world. This study aimed to develop a digital twin model for airflow prediction that can predict airflow in various situations by applying the concept of digital twin to a plant factory in operation. To this end, first, the mathematical formalism of the digital twin model for airflow analysis in plant factories is presented, and based on this, the information necessary for airflow prediction modeling of a plant factory in operation is specified. Then, the shape of the plant factory is implemented in CAD and the DT model is developed by combining the computational fluid dynamics (CFD) components for airflow behavior analysis. Finally, the DT model for high-accuracy airflow prediction is completed through the validation of the model and the machine learning-based calibration process by comparing the simulation analysis result of the DT model with the actual airflow value collected from the plant factory.

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.233-239
• /
• 2017

Purpose: This study was performed to quantify the repeat rate of imaging acquisitions based on different clinical examinations, and to assess the prevalence of error types in intraoral bitewing and periapical imaging using a digital complementary metal-oxide-semiconductor(CMOS) intraoral sensor. Materials and Methods: A total of 8,030 intraoral images were retrospectively collected from 3 groups of undergraduate clinical dental students. The type of examination, stage of the procedure, and reasons for repetition were analysed and recorded. The repeat rate was calculated as the total number of repeated images divided by the total number of examinations. The weighted Cohen's kappa for inter- and intra-observer agreement was used after calibration and prior to image analysis. Results: The overall repeat rate on intraoral periapical images was 34.4%. A total of 1,978 repeated periapical images were from endodontic assessment, which included working length estimation (WLE), trial gutta-percha (tGP), obturation, and removal of gutta-percha (rGP). In the endodontic imaging, the highest repeat rate was from WLE (51.9%) followed by tGP (48.5%), obturation (42.2%), and rGP (35.6%). In bitewing images, the repeat rate was 15.1% and poor angulation was identified as the most common cause of error. A substantial level of intra- and inter-observer agreement was achieved. Conclusion: The repeat rates in this study were relatively high, especially for certain clinical procedures, warranting training in optimization techniques and radiation protection. Repeat analysis should be performed from time to time to enhance quality assurance and hence deliver high-quality health services to patients

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.453-454
• /
• 2003

Most research materials (data), which are used for the study of digital mapping and digital elevation model (DEM) in the field of Remote Sensing and Aerial Photogrammetry are aerial photographs and satellite images. Additionally, they are also used for National land mapping, National land management, environment management, military purposes, resource exploration and Earth surface analysis etc. Although aerial photographs have high resolution, the data, which they contain, are not used for environment exploration that requires continuous observation because of problems caused by its coastline, as well as single - spectral and long-term periodic image. In addition to this, they are difficult to interpret precisely because Satellite Images are influenced by atmospheric phenomena at the time of photographing, and have by far much lower resolution than existing aerial photographs, while they have a great practical usability because they are mulitispectral images. The PKNU 2 is an aerial photographing system that is made to compensate with the weak points of existing aerial photograph and satellite images. It is able to take pictures of very high resolution using a color digital camera with 6 million pixels and a color infrared camera, and can take perpendicular photographs because PKNU 2 system has equipment that makes the cameras stay level. Moreover, it is very cheap to take pictures by using super light aircraft as a platform. It has much higher resolution than exiting aerial photographs and satellite images because it flies at a low altitude about 800m. The PKNU 2 can obtain multispectral images of visible to near infrared band so that it is good to manage environment and to make a classified diagram of vegetation.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.3
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.135-144
• /
• 2003

This work proposes on-chip full CMOS current and voltage references for high-speed mixed-mode circuits. The proposed current reference circuit uses a digital-domain calibration method instead of a conventional analog calibration to obtain accurate current values. The proposed voltage reference employs internal reference voltage drivers to minimize the high-frequency noise from the output stages of high-speed mixed-mode circuits. The reference voltage drivers adopt low power op amps and small- sized on-chip capacitors for low power consumption and small chip area. The proposed references are designed, laid out, and fabricated in a 0.18 um n-well CMOS process and the active chip area is 250 um x 200 um. The measured results show the reference circuits have the power supply variation of 2.59 %/V and the temperature coefficient of 48 ppm/$^{\circ}C$ E.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2006

In order to generate a photo-realistic synthesized image, we should reconstruct light environment by 3D analysis of scene. This paper presents a novel method for identifying the positions and characteristics of the lights-the global and local lights-in the real image, which are used to illuminate the synthetic objects. First, we generate High Dynamic Range(HDR) radiance map from omni-directional images taken by a digital camera with a fisheye lens. Then, the positions of the camera and light sources in the scene are identified automatically from the correspondences between images without a priori camera calibration. Types of the light sources are classified according to whether they illuminate the whole scene, and then we reconstruct 3D illumination environment. Experimental results showed that the proposed method with distributed ray tracing makes it possible to achieve photo-realistic image synthesis. It is expected that animators and lighting experts for the film and animation industry would benefit highly from it.