• 한국연소학회지
• /
• 제6권2호
• /
• pp.23-28
• /
• 2001

In the present work, the effect of PDF selection and intermittency on the result of the numerical simulation are examined by the simulation of a turbulent methane-air jet diffusion flame. As to the PDFs, beta-function and clipped Gaussian are considered. Results for the pure mixing jet are compared with experimental results. Then, the turbulent flame is calculated for the same conditions and the results obtained for the several models are compared. It is found that the clipped Gaussian distribution coupled with consideration of intermittency recovers the experimental data very well. As to the reacting flow results, the main overall properties of the turbulent jet diffusion flame such as maximum flame temperature are less affected by the choice of the PDF. Flame height and NO emissions, on the contrary, appear to be significantly influenced.

• 한국해양환경ㆍ에너지학회지
• /
• 제11권2호
• /
• pp.92-97
• /
• 2008

일반적으로 해수가 강으로 침입하거나 담수가 해양으로 유입을 하면 두 유체간의 밀도차에 의한 밀도류의 성질을 가진다. 하지만, 염분과 온도가 동시에 밀도의 차를 결정하는 경우, 특히 이 중 하나가 중력과 불안정한 수직 분포를 갖게되면 이중확산이 혼합을 결정하는 중요한 요인이 된다. 본 연구에서는 고온, 고염의 수괴가 저온, 저염의 수괴로 진입할 때 기계적 혼합과 이중확산에 의한 대류가 혼합에 미치는 상대적 영향을 비교 연구하였다. 실험실에서 차갑고 염도가 없는 주 흐름에 온도가 높고 염분이 높은 밀도류를 조심스럽게 방류시켜 정상상태의 염수침입 형태를 유지하였다. 수평방향으로 따라 밀도율(Turner 1979)이 15정도 되면 온도와 염분의 유출입량비율이 가파르게 변화하였고, 전체적으로 방출구 부분에서 이중확산의 영향이 강하게 나타나게 되며 이 경우에는 총 방출량도 함께 증가하였다. 아울러 밀도율이 낮은 경우 밀도율이 높은 경우에 비해서 약 $6{\times}10$배의 높은 혼합율을 보였다.

• 대한화학회지
• /
• 제52권1호
• /
• pp.73-83
• /
• 2008

이 연구의 목적은 고등학생들의 용해·확산과 관련된 혼합현상에 대한 개념 유형을 알아보고자 하는 것이다. 연구대상은 화학 I 과목을 수강하는 고등학교 2학년 학생 108명과 화학 II 과목을 수강하는 고등학교 3학년 학생 29명이다. 연구 결과, 많은 학생들이 분필이 무극성 물질이기 때문에 물에 섞이지 않는다는 대안 적 개념을 가지고 있었다. 사염화탄소가 물에 섞이지 않는 현상에 대해서 대부분의 학생들이 인력의 개념으로 이해하였으나, 밀도 차이와 같은 물질의 특성의 차이로 이해하는 유형 또한 많았다. 물과 에탄올이 한없이 섞 이는 현상은 많은 학생들이 인력 개념으로 이해하였다. 대부분 학생들은 수성 잉크와 물이 섞이는 현상을 섞 이는 이유에 대해서는 알지 못한 채 단지 퍼져나가는 현상 자체로만 받아들이고 있었다. 요오드가 사염화탄소 에 섞이는 현상은 구멍이론이나 인력 개념으로 이해하였다. 이러한 용해·확산과 관련된 혼합현상에 대한 다 양한 대안적 개념은 엔트로피 개념의 부족으로 인한 것이다. 따라서 학생들이 이러한 현상을 제대로 이해하도 록 과학 교과서의 서술 방식이 바뀔 필요가 있다.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.795-801
• /
• 1999

An experimental investigation has been conducted with the objective of studying the mixing mechanism near the nozzle exit in a tone-excited jet diffusion flame. The fuel jet was pulsed by means of a loudspeaker-driven cavity. The excitation frequencies were chosen for the two cases of the non-resonant and resonant frequency identified as a fuel tube resonance due to acoustic excitation. The effect of tone-excitations on mixing pattern near the nozzle exit and flame was visualized using various techniques, including schlieren photograph and laser light scattering photograph from $TiO_2$ seed particles. In order to clarify the details of the flame feature observed by visualization methods, hotwire measurements have been made. Excitation at the resonant frequency makes strong mixing near the nozzle. In this case, the fuel jet flow in the vicinity of nozzle exit breaks up into disturbed fuel parcels. This phenomena affects greatly the combustion characteristics of the tone excited jet and presumably occurs by flow separation from the wall inside the fuel nozzle. As a result, in the resonant frequency the flame length reduces greatly.

• 오토저널
• /
• 제11권3호
• /
• pp.37-48
• /
• 1989

The effects of burnt gas mixing, which can be caused by turbulent eddy mixing, on the interaction and extinction characteristics of premixed flames are analyzed using large activation energy asymptotics adopting counterflow as a model problem. The results show that the burnt gas mixing, preferential diffusion and heat loss affect the fuel consumption rate, flame temperature and the oxidizer concentration at the flame which influence the flame behavior and the extinction characteristics.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.93-101
• /
• 2003

The extinction of unsteady diffusion flame was experimentally studied in an opposing jet counterflow burner using diluted methane. The stabilized flame was perturbed by linearly varying velocity change that was generated by pistons installed on both sides of the air and fuel stream. As the results, the extinction of unsteady flame is dependent not only on the history of unsteadiness, but also on the initial condition. We found that there are several unsteady effects on the flame extinction. First, the extinction strain rates of unsteady cases are extended well beyond steady state extinction limits. Second, as the slope of the strain rate change increases, the unsteady extinction strain rate becomes larger. Third, the extension of unsteady extinction strain rate becomes smaller as the initial strain rate increases. We also found that the extension of the extinction limit mainly results from the unsteady response of the reaction zone because there is no retardation effect of a mixing layer for our experimental condition.

• Toxicological Research
• /
• 제17권1호
• /
• pp.7-9
• /
• 2001

The quantitative assessment of the penetration of organic solvents through skin is necessary for the evaluation of health hazards in occupational environments. We investigated the rate of dermal penetration when mixed or single forms of organic solvents were placed into a diffusion cell in vitro or into an experimental animal in vivo. The diffusion rates of methanol. toluene, and styrene were 6.07, 0.129, and 0.046 mg/$cm^2$/h, respectively. When skin was exposed to the mixed solvent of methanol and toluene, the penetration rate of toluene did not change significantly (0.110 mg/$cm^2$/h). However, the rate of methanol penetration increased to 43.90 mg/$\textrm{cm}^2$/h. The penetration rate of methanol also increased significantly to 54.69 mg/$cm^2$/h by mixing it with styrene. The concentration of methanol in the blood was monitored during the epicutaneous exposure in rats. The blood concentration of methanol was increased by mixing methanol with toluene as seen in the in vitro experiments. These results showed that the penetration rate of organic solvents would be enhanced by mixing them with other solvents.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.123-129
• /
• 1998

A numerical study has been conducted to investigate the effect of shock waves on the mixing and the recirculation zone of a hydrogen jet diffusion flame in a supersonic combustor. The general trends are compared with the experimental results obtained from the supersonic combustor at the University of Michigan. For the numerical simulation of supersonic diffusion flames, multi-species Navier-Stokes equations and detailed chemistry reaction equations of $H_2$-Air are considered. The $K-{\omega}/k-{\varepsilon}$ blended two equation turbulent model is used. Roe's FDS method and MUSCL method are used for convection fluxes in governing equations. Numerical results show that when slender wedges are mounted at the combustor wall the mixing and the combustion are enhanced and the size of recirculation zone is increased . The flame shape of supersonic flames is different in the flame-tip; it is not closed but open. The flame shape is shown to be greatly affected by shock waves.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1758-1760
• /
• 2008

Under typical operating conditions, flows in microfluidic devices are laminar and molecular diffusion across the channels is slow, which makes an efficient mixing in microfluidic devices difficult to achieve. The mechanism to achieve effective mixing in laminar flows is that of repetitive stretching and folding. Essential is to generate spatially periodic flows with crossing cross sectional streamlines. A mapping method is employed to analyze mixing in micromixers, enabling us to investigate the progress of mixing both qualitatively and quantitatively. The progress of mixing is characterized by a measure of mixing, called the discrete intensity of segregation. The mapping method is applied to mixing in such micromixers as the staggered herringbone mixer, the barrier embedded micromixer, and the three-dimensional serpentine channel to demonstrate the capability of the numerical scheme to tackle general mixing problems in microfluidic devices.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.191-199
• /
• 1993

정상 2차원 이송확산(移送擴散) 방정식의 수치해석에 의하여 난류전단(亂流剪斷) 흐름에서의 정상(定常) 수평(水平) 선오염원(線汚染源)의 확산(擴散)을 모의하였다. 유속과 난류확산계수(亂流擴散係數)의 수심에 따른 변화가 없을 경우에 대한 해석해와 비교한 결과, 일정 유속 및 난류확산계수(亂流擴散係數)를 가정할 경우 수심방향 확산(擴散)을 과대평가하는 것으로 나타났다. 무차원화된 지배방정식에 따르면 수심방향 확산(擴散)을 지배하는 물리적 변수는 마찰계수(摩擦係數)뿐이다. 마찰계수(摩擦係數)에 대한 확산과정의 민감도(敏感度) 분석(分析)으로부터 수심방향 확산속도(擴散速度)는 대략 마찰계수(摩擦係數)의 제곱근에 비례함을 알 수 있었다. 오염원(汚染源)의 초기 방류위치에 따른 민감도(敏感度) 분석(分析) 결과, 가장 신속한 수심 방향 확산(擴散)을 가져오는 최적의 방류위치는 수심의 중간정보다 위쪽이며, 마찰계수(摩擦係數)가 커질수록 그 위치가 수면쪽에 가까와지는 것으로 나타났다.