• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.112-120
• /
• 2016

The nonlinearity parameter is frequently measured as a sensitive indicator in damaged material characterization or tissue harmonic imaging. Several previous studies have employed the plane wave solution, and ignored the effects of beam diffraction when measuring the non-linearity parameter ${\beta}$. This paper presents a multi-Gaussian beam approach to explicitly derive diffraction corrections for fundamental and second harmonics under quasilinear and paraxial approximation. Their effects on the nonlinearity parameter estimation demonstrate complicated dependence of ${\beta}$ on the transmitter-receiver geometries, frequency, and propagation distance. The diffraction effects on the non-linearity parameter estimation are important even in the nearfield region. Experiments are performed to show that improved ${\beta}$ values can be obtained by considering the diffraction effects.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.791-795
• /
• 2000

Amorphous chalcogenide glasses have a wide variety of light-induced effects. In this study, we have investigated the diffraction efficiency of chalcogenide. As$_{40}$ Ge$_{10}$ Se$_{15}$ S$_{35}$ thin films by the various applied electric fields. The holographic grating in these thin films has been formed using a linearly polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two method of applied electric field in the perpendicular and parallel to the direction of inducing beam. We obtained that properties of diffraction efficiency in the two methods of applied electric field. The result is shown that the diffraction efficiency of parallel electric field is 285% increase, η=1.1$\times$10$^{-3}$ and the diffraction efficiency of perpendicular electric field is 80% decrease, η=9.83$\times$10$^{-5}$ . Also, we have investigated the anisotropy property on chalcogenide thin films by the electric field effects.

• 한국통신학회논문지
• /
• 제38C권9호
• /
• pp.757-763
• /
• 2013

본 논문에서는 수도권 서북부 지역의 3차원 지리정보를 바탕으로 다중예봉모형을 (multiple knife-edge model) 적용해 전파교란기와 수신기의 지리적 위치에 따른 회절손실을 (diffraction loss) 계산하고, 이를 바탕으로 광대역 잡음재밍 (wideband Gaussian null-to-null noise jamming), 스펙트럼일치형재밍 (matched spectrum jamming), 연속파재밍에 (continuous wave jamming) 의한 GPS (global positioning system) L1 C/A (coarse/acquisition) 신호의 여유재밍전력을 (marginal jamming power) 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• ETRI Journal
• /
• 제42권6호
• /
• pp.827-836
• /
• 2020

Measuring the diffraction loss for high frequencies, long distances, and large diffraction angles is difficult because of the high path loss. Securing a well-controlled environment to avoid reflected waves also makes long-range diffraction measurements challenging. Thus, the prediction of diffraction loss at millimeter-wave frequency bands relies on theoretical models, such as the knife-edge diffraction (KED) and geometrical theory of diffraction (GTD) models; however, these models produce different diffraction losses even under the same environment. Our observations revealed that the KED model underestimated the diffraction loss in a large Fresnel-Kirchhoff diffraction parameter environment. We collected power-delay profiles when millimeter waves propagated over a building rooftop at millimeter-wave frequency bands and calculated the diffraction losses from the measurements while eliminating the multipath effects. Comparisons between the measurements and the KED and GTD diffraction-loss models are shown. Based on the measurements, an approximation model is also proposed that provides a simple method for calculating the diffraction loss using geometrical parameters.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.198-205
• /
• 2006

The necessity of nondestructively inspecting austenitic steels, fiber-reinforced composites, and other inherently anisotropic materials has stimulated considerable interest in developing beam models for anisotropic media. The properties of slowness surface playa key role in the beam models based on the paraxial approximation. In this paper, we apply a modular multi-Gaussian beam (MMGB) model to study the effects of material anisotropy on ultrasonic beam profile. It is shown that the anisotropic effects of beam skew and excess beam divergence enter into the MMGB model through parameters defining the slope and curvature of the slowness surface. The overall beam profile is found when the quasilongitudinal(qL) beam propagates in the symmetry plane of transversely isotropic austenitic steels. Simulation results are presented to illustrate the effects of these parameters on ultrasonic beam diffraction and beam skew. The MMGB calculations are also checked by comparing the anisotropy factor and beam skew angle with other analytical solutions.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.58-63
• /
• 1998

Cross-talk effects in high-density volume holographic interconnections are investigated using perturbative iteration method of the integral form of Maxwell's wave equation. In this method, the paraxial approximation and negligence of backward scattering introduced in conventional coupled mode theory is not assumed. Interaction geometries consisting of non-coplanar light waves and multiple index gratings are studied. Arbitrary light polarization is considered. Systematic analysis of cross-talk effects due to multiple index gratings is performed in increasing level of diffraction orders corresponding to successive iterations. Some numerical examples are given for first and third order diffraction.

• 한국해안·해양공학회논문집
• /
• 제27권6호
• /
• pp.424-433
• /
• 2015

본 연구에서는 회절을 고려하여 반무한방파제 형식의 직립식 장대구조물에 작용하는 파력에 대해 검토하였다. 장대구조물에 작용하는 파력은 규칙파, 일방향 불규칙파 및 다방향 불규칙파를 대상으로 하였다. 방파제 전면 및 후면에서 발생하는 회절을 모두 고려하였다. 방파제의 상대길이(1/L)가 0인 경우 방파제에 작용하는 파력은 회절에 의해 0이 된다. 방파제의 상대길이가 1.0 이하인 경우에는 회절의 영향이 비교적 강하였으며, 방파제의 상대길이가 0.5 이상인 경우에는 방파제의 장대화 효과에 의해 작용 파력이 크게 감소하였다. 즉, 방파제의 상대길이가 1.0 이하인 경우에는 회절효과의 고려가 필요하며, 장대 방파제의 파력 감소효과를 얻기 위해서는 방파제의 상대길이가 최소 0.5 이상이어야 함을 알 수 있다.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.18-26
• /
• 2010

Diffraction gratings with precise spatial periods of 2 ${\mu}m$ and 5 ${\mu}m$ have been fabricated by using a femtosecond laser which does not have limits on materials of micromachining and small thermal effects due to high peak power. Diffraction angle and diffraction efficiency of those were measured. Simulation results of diffraction angle and diffraction efficiency of the diffraction grating calculated with the parameters such as line width, depth, and spatial period of the fabricated gratings were compared with experimental results measured with a He-Ne laser. Besides these, Fresnel Zone Plates (FZPs) with focal distances of 50 mm and 25 mm were fabricated and focal distances of fabricated FZP were measured. Those experimental results for diffraction gratings and FZPs match well with experimental results.

• 물과 미래
• /
• 제7권1호
• /
• pp.55-64
• /
• 1974

The knowledge of the waves passing through the breakwater makes an important role in the efficient breakwater design. Wave diffraction is an important factor in this role, but some usable development about it have not been made in our country as yet. The diffraction of sea-water waves round the end of a semi-infinite impermeable breakwater has been investigated, applying a solution of the water wave diffraction problems given by Penney & Price. The wave pattern and heights on both the leewardside and the windward-side of the breakwater have been calculated and summarized in the form of diagrams with diffraction factors between $r/{\lambda}=0~50$. This involves some extension of the diffraction diagrams made previously. The theory and computation methods with computer program in fortran IV developed in this study make an efficient use for estimating the diffraction effects at a semi-infinite breakwater.