• 한국광학회지
• /
• 제6권4호
• /
• pp.331-336
• /
• 1995

미세 반도체가 첨가된 유리에 암색화에 따른 정상상태 포화흡수 변화를 조사하였고 축퇴 4광파 혼합 실험으로 영구 회절격자를 형성시켜 회절 효율을 연구하였다. 사용된 레이저는 Q-switch된 Nd:YAG레이저의 제2조화파로 펼스폭은 15ns이었다. 시료가 암색화된에 따라 포화 흡수세기 $I_s$는 증가하였고, 축퇴 4광파 혼합 실험 장치로부터 전방 펌프빔과 조사빔에 의한 큰 간격의 영구 회절격자를 형성하여 후방 펌프빔의 세기에 따라 회절 되어 나오는 빛의 세기를 측정하였다. 영구 회절격자는 암색화 현상에 의한 것으로 회절효율은 회절 되는 후방 펌프빔의 세기가 크지 않을 때 그 세기에 비례하는데, 이는 암색화에 의해 형성된 회절격자 사이의 흡수 차이에 의한 것임을 알 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제10권3호
• /
• pp.105-111
• /
• 2006

A novel image quality evaluation method, which is based on combination of the rigorous grating diffraction theory and the ray-optic method, is proposed. It is applied for design optimization and, tolerance analysis of optical imaging systems implementing diffractive optical elements (DOE). The evaluation method can predict the quality and resolution of the image on the image sensor plane through the optical imaging system. Especially, we can simulate the effect of diffraction efficiencies of DOE in the camera lenses module, which is very effective for predicting different color sense and MTF performance. Using this method, we can effectively determine the fabrication tolerances of diffractive and refractive optical elements such as the variations' in profile thickness, and the shoulder of the DOE, as well as conventional parameters such as decenter and tilt in optical-surface alignments. A DOE-based 2M-resolution camera lens module designed by the optimization process based on the proposed image quality evaluation method shows ${\sim}15%$ MTF improvement compared with a design without such an optimization.

• 한국광학회지
• /
• 제10권5호
• /
• pp.391-395
• /
• 1999

4% 물의 MgO가 도핑된 광굴절 $LiNbO_3$ 결정에 기록된 광굴절 격자의 회절 효율과 응답시간을 측정하였다. 이 실험에는 고출력 펄스 Nd:YAG 레이저(Q-switch mode,$\lambda$=532nm)와 연속 발진 아르곤 이온 레이저($\lambda$=514.5nm)가 사용되었다. 두 종류의 레이저 광속에 대한 실험에서 광학계의 배열을 동일하게 하고 2광파 혼합 조건에서 레이저 광속의 세기를 1.6~100W/$\textrm{cm}^2$까지 변화시켜가며 최대 회절 효율과 기록 및 소거시의 응답시간을 측정하였다. 두 실험에서 얻은 결과를 비교하고 분석 하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.275-276
• /
• 2007

체적형 홀로그래픽 메모리는 고용량의 저장밀도와 빠른 전송속도를 가지는 장점을 가지고있다. 더 높은 저장밀도를 얻기 위해 다양한 다중화 기법들이 연구되고 있다. 일정한 공간에 여러 개의 정보를 한꺼번에 저장할 수 있는 다중화 기법에는 각도에 따른 다중화, 기록 위치에 따른 다중화, 위상 변화에 따른 다중화를 비롯한 여러 가지 방법이 있다. 대부분의 다중화 기법들은 홀로그램을 저장할 때 순차적으로 기록하게 된다. 하지만 포토폴리머에 한번 정보가 저장되면 그 위에 다시 기록이 되지 않는다. 그래서 한번에 여러 개의 데이터를 저장하고 재생하는 시스템의 필요성이 요구된다. 본 논문에서는 이러한 점을 고려하여 빛의 편광성분을 이용해 다중화 하는 방법을 연구하였다.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.140-148
• /
• 1998

We prepared $C_3N_4$ films by rf plasma enhanced chemical vapor deposition(PCVD) and alternating $C_3N_4$/TiN composite films by dc magnetron sputtering. X-ray diffraction (XRD) and transmission electron diffraction (TED) revealed that the structure of the films is amorphous or polycrystalline, depending on deposition conditions and heat treatment. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy confirmed the presence of $sp_3\; and sp _2$ hybridized C atoms bonded with N atoms in the tetrahedral and hexagonal configurations, respectively. Graphite-free $C_3N_4$ films were obtained by PCVD under optimal conditions. To prepare well crystallized $C_3N_4$ films by magnetron sputtering, we introduced negatively biased gratings in the sputtering system. CN films deposited at grating voltages (Vg) lower than 400V are amorphous. Crystallites of cubic and $\beta$-$C_3N_4$ were formed at increased voltages.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.230-233
• /
• 2003

New photopolymers were designed and prepared using the photosensitive polymer binders. The photochemical reaction of the photosensitive polymer binder was studied by virtue of UV absorption and infrared spectroscopy. The holographic gratings were successfully fabricated in these photopolymer film samples by conventional optical interference method. We also investigated the effect of photocrosslink in the polymer binder on the diffraction behavior of the photopolymer. The dynamic behaviors of the grating formation were studied with the change of exposure intensity in terms of the diffraction efficiency. Particularly, we focused our efforts to observe the variation of the diffraction efficiency during post UV curing process.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.249-252
• /
• 2003

A simple multi-channel spectrum analyzer using an InGaAs array sensor and a diffraction grating is proposed and developed for high-capacity optical transport networks. With the developed multichannel spectrum analyzer, we could measure signal power, wavelength, and optical signal-to-noise ratio of each channel for multi-channel optical signals with 100 GHz and 50 GHz channel spacing, simultaneously. We could measure each channel power and wavelength with a deviation of less than 0.2 dB and 0.063 nm, respectively. We have obtained optical signal-to-noise ratio with a deviation of less than 1.0 dB compared with conventional optical spectrum analyzer in the wide input power range between -42 dBm and -27 dBm per channel.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.16-24
• /
• 1992

Moire interferometry using a diffraction grating and a laser is a powerful technique for analizing small deformation of a specimen. In the method, the x and y-directional fringe patterns are obtained by using the x and y-directional sets of two beams. If the both sets of two beams are simultaneously incident to the specimen, the x and y-directional fringe patterns are super imposed. In this case, it is difficult to separate each directional fringe pattern. Therefore each fringe pattern has been separately recorded by selecting each set of two beams. In order to analyze a two-dimensional strain changing with time, Moire interferometry using the two-dimensional fourier transform method is proposed and the x and y-directional fringes are separated. By this method, the thermal deformation of a glass plate is analyzed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.878-882
• /
• 2004

Position controls are very important in semiconductor manufacturing devices, machine tools precision measuring instruments, etc. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.478-481
• /
• 2003

We studied a periodic boundary effect in liquid crystal (LC) devices with multi-domains consisting of homeotropic and hybrid alignments. In this configuration, the surface anchoring energy was determined using the LC director-distorted length near the domain boundary, in a linear approximation of the director profile based on the continuum theory. The distorted length was measured in the LC binary diffraction grating.