• Tuberculosis and Respiratory Diseases
• /
• v.49 no.1
• /
• pp.82-92
• /
• 2000

Background : In chronic airway disease, mucus secretion is increased, but extraction of mucin, which is the main component of mucus secretion, is a very complicated and limited in clinical use. Recently, monoclonal antibody for mucin was developed for possible clinical use. In this study, cellular analysis and quantification of respiratory mucin in sputum of patients with chronic airway diseases were performed. Method : Sputum was collected from patients with asthma(n=33), bronchiectasis(n=8) or chronic bronchitis (n=13) by spontaneous expectoration or by hypertonic saline induction. Collected sputums was treated by 0.1% dithiotreitol to dissociate the disulfide bond of the mucus and filtered through a nylon gauze. Total cell count, viability and differential count were measured. For detection of mucin, collected samples were treated with sodium dodecyl sulfate polyacrylamide gel electrophoresis and then with monoclonal antibody(HMO2), as the primary antibody, and PAS stain. The amount of mucin was measured with ELISA by HMO2. Correlation with clinical information, cellular analysis, and amount of measured mucin were analyzed. Results : Total cell counts of sputum were significantly increased in patients with bronchiectasis but viability remained the same. Eosinophils were significantly increased in patients with asthma, neutrophils in bronchiectasis chronic bronchitis, respectively (p<0.05). The results of Western blotting and PAS staining confirmed the presence of glycoproteins and matched? with mucin. The amounts of mucin measured by ELISA were not significantly different among the disease groups. Significant correlation was identified between the amount of mucin and viability(r=-0.482, p<0.05). Conclusion : Inflammatory cells in the sputum of those with chronic airway disease were different for each disease type. Measurement of mucin by ELISA via monoclonal antibodies may be a simple method for the evaluation of chronic airway disease.

• Clinical and Experimental Pediatrics
• /
• v.50 no.4
• /
• pp.369-375
• /
• 2007

Purpose : There have been numerous researches on urine ${\beta}_2$-microglobulin (${\beta}_2$-M) concerned with primary nephrotic syndrome and other glomerular diseases, but not much has been done in relation to pediatric age groups. Thus, our hospital decided to study the relations between the analysis of the test results we have conducted on pediatric patients and renal functions. Methods : Retrospective data analysis was done to 102 patients of ages 0 to 4 with renal diseases with symptoms such as hematuria, edema, and proteinuria who were admitted to Chung-Ang Yongsan Hospital and who participated in 24-hour urine and urine ${\beta}_2$-M excretion test between January of 2003 and January of 2006. Each disease was differentiated as independent variables, and the statistical difference of the results of urine ${\beta}_2$-M excretion of several groups of renal diseases was analyzed with student T-test by using test results as dependent variables. Results : Levels of urine ${\beta}_2$-M excretion of the 102 patients were as follows : 52 had primary nephrotic syndrome [MCNS (n=45, $72{\pm}45{\mu}g/g$ creatinine, ${\mu}g/g-Cr$), MPGN (n=3, $154{\pm}415{\mu}g/g-Cr$), FSGS (n=4, $188{\pm}46{\mu}g/-Cr$], six had APSGN ($93{\pm}404{\mu}g/g-Cr$), seven had IgA nephropathy ($3,414{\pm}106{\mu}g/g-Cr$), 9 had APN ($742{\pm}160{\mu}g/g-Cr$), 16 had cystitis ($179{\pm}168{\mu}g/g-Cr$), and 12 had HSP nephritis ($109{\pm}898{\mu}g/g-Cr$). IgA nephropathy (P<0.05) and APN (P<0.05) were significantly higher than in other renal diseases. Among primary nephrotic syndrome, FSGS with higher results of ${\beta}_2$-microglobulin test had longer treatment period (P<0.01) when compared to the lower groups, but no significant differences in Ccr, BUN, or Cr were observed. Conclusion : IgA nephropathy and APN groups showed significantly higher level of ${\beta}_2$-M excretion value than other groups. Although ${\beta}_2$-microglobulin value is not appropriate as an indicator of general renal function and pathology, it seems to be sufficient in the differential diagnosis of the UTI and in the prediction of the treat-ment period of nephrotic syndrome patients.

• Management & Information Systems Review
• /
• v.33 no.1
• /
• pp.191-217
• /
• 2014

The Purpose of this study is to find the effect factors of R&D investment in SMEs which plays an important role in the national economy, and the differences of the effect factors by the type of SMEs. The subject of this study is about 3,400 SMEs mentioned in "The survey of technical statistics on SMEs in 2007" by Korea Federation of Small and Medium Business. The effect factors are related with the size of business, the infrastructure of R&D and the activities of R&D which have been studied by many researchers. The methods of analysis are regression analysis, moderating effect analysis and the software package used is SPSS 12.0. The results of the study are as fallow. First, it was found that unlike in previous studies which show the effect of the elements of business's size, research infrastructure, research activities on R&D investment, one element alone can't be considered for meaningful result but the various elements have effect on R&D investment at the same time. In other words, the number of employees and the sales as the elements of business's size, the ratio of researchers, the technical ability, the ratio of equipment possession and the intellectual properties as the elements of R&D infrastructure, the activity of ideas and joint research as the elements of R&D activities have positive(+) effect, whereas the participation of CEO in the activity of R&D as the elements of R&D activities activity has negative(-) one. The number of employees, the ratio of researchers, and the sales had relatively high influence whereas equipment possession, technical ability, intellectual properties, the participation of CEO in the research, the activity of idea, joint research had relatively low influence. Next, it was also found that there are differences of the effect factors over the types of SMEs. SMEs were classified into 19 types by eight criteria such as start-ups and existing business by business age; small business and medium business by size; manufacturing business and service business by product type;independent business and subcontractor business by dealing type; businesses in the entering, growing, maturing and restructuring stage by growth stage; businesses with low, medium and high technology by technological level; pioneering business and non-pioneering business by industrial type; and businesses with state-of-the-art technology and non-advanced business by the level of business activities. The meaning of this study lies in the fact that it found the various effect factors should be considered at the same time when conducting study on SMEs' R&D investment, and the differences by the type should be acknowledged. This study surpassed the limitations of the previous studies which focused on a couple of factors and types. This study result can also be considered for other studies on achievement, organization, marketing and others. Moreover, it shows that a differential policy by business type is needed when formulating SME policy.

• Journal of Korean Society of Forest Science
• /
• v.80 no.1
• /
• pp.32-41
• /
• 1991

This study is focusted to the national park of Korean typical mountain Chi-ri, its visual resources of forests, and practiced inspectind course by way of hypothesis and tests, to show visual resource management objectively, and that of quantitative basic data. spatial image structure measured by Semantic Differential(S.D.) Scale was shown through factor analysis algorithm for the analyzing psychological amount and examined the flowing out of decisive factor and the objective importance related mutual factors by appling the measurement of visual quality. Also, it has been investigated the differences between the degrees of expectation which is used before and of satisfaction which is used, by appling instrumental expectation theory. And showed patterns of investigation area through factor analyzing algorithm. As a national Park, visual factors that have natural landscape harmonized forest, sky, surface of the water, curious stones and rocks, temples should be escalate their values affirmatively so as to be the scenery of pointed direction and enjoyable, and it is needs the techniques visual resource management and its controlling technique to make artificial structures more intentional planning and systemical setting. Manmade distinctive quality in the spatials that affect complementally or harmonizingly, should be received considering relations between the distifution and joining which in line with various visual presenting massive factors. More than that, it is needed united basic standard to the beauty of arrangements which contain visual continuity considered balance between nature and human work, simplicity of structural types, assimilation, emphasis, unification of different factors and pro rata.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.751-762
• /
• 2010

In order to understand the influence that the plant cover condition of the high-rise building outer space causes to the temperature change, we selected 12 high-rise building constructed in Seoul City. The land cover type of the outside was classified into six type(outer road, paved surface, shrub/grassland, single-layer tree planting-site, multi-layer planting-site, and waterscape facilities) and the temperature was measured at the representative point for each type in order to analyze the land cover temperature differential for each type of the high-rise building outer space. The study area showing the temperature tendency to be similar based upon one way analysis of variance after selecting the central part of the outer road for a control and measuring a temperature in order to consider the neighboring environmental difference of the dozen building was classified into 4 groups. As to the one-way layout result of variance analysis with the land cover type of the classified group and outer space temperature, the single-layer tree planting-site, waterscape facilities, and multi-layer planting-site belonged mainly to the low temperature section. The shrub/grassland, paved surface, and outer road belonged to the high temperature region. The temperature difference between low temperature region and high temperature region is about $1.06{\sim}6.17^{\circ}C$. However, the temperature in the Outer Space of the Super-High-Rise Building was variously appeared by the influence such as the cramped of the created planting-site and waterscape facilities area, the increase of amount of solar radiation and the reduction of reflection amount of light due to building etc.. Thus, the composition all produced the area of the green quantity required for each space and water space in advance. It was determined that there were the minimum area displaying an effect and the necessity to it secures the green quantity.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.404-412
• /
• 2011

The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.19 no.1
• /
• pp.20-25
• /
• 2019

Very-long-chain acyl-CoA dehydrogenase (VLCAD) deficiency (OMIM#201475) is an autosomal recessively inherited metabolic disorder of mitochondrial long-chain fatty acid oxidation. The clinical features of VLCAD deficiency is classified by three clinical forms according to the severity. Here, we report a case of later-onset episodic myopathic form of VLCAD deficiency whose diagnosis was confirmed by plasma acylcarnitine analysis and" multigene panel multigene panel sequencing. A 34-year old female patient visited genetics clinic for genetic evaluation for history of recurrent myopathy with intermittent rhabdomyolysis. She suffered first episode of rhabdomyolysis with acute renal failure requiring hemodialysis at twelve years old. After then, she suffered several times of recurrent rhabdomyolysis provoked by prolonged exercise or fasting. Physical and neurologic exam was normal. Serum AST/ALT and creatinine kinase (CK) levels were mildly elevated. However, according to her previous medical records, her AST/ALT, CK were highly elevated when she had rhabdomyolysis. In suspicion of fatty acid oxidation disorder, multigene panel sequencing and plasma acylcarnitine analysis were performed in non-fasting, asymptomatic condition for the differential diagnosis. Plasma acylcarnitine analysis revealed elevated levels of C14:1 ($1.453{\mu}mol/L$; reference, 0.044-0.285), and C14:2 ($0.323{\mu}mol/L$; 0.032-0.301) and upper normal level of C14 ($0.841{\mu}mol/L$; 0.065 -0.920). Two heterozygous mutation in ACADVL were detected by multigene panel sequencing and confirmed by Sanger sequencing: c.[1202G>A(;) 1349G>A] (p.[(Ser 401Asn)(;)(Arg450His)]). Diagnosis of VLCAD deficiency was confirmed and frequent meal with low-fat diet was educated for preventing acute metabolic derangement. Fatty acid oxidation disorders have diagnostic challenges due to their intermittent clinical and laboratorial presentations, especially in milder late-onset forms. We suggest that multigene panel sequencing could be a useful diagnostic tool for the genetically and clinically heterogeneous fatty acid oxidation disorders.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.343-355
• /
• 2022

This study investigated the consumption tendency and awareness of paprika in order to expand and promote the consumption of Capsicum annuum L. The research investigated the relationship of preference and loyalty based on emotional response of paprika according to the semantic differential scale. The survey was conducted from January to February 2022 using a random sampling method targeting 155 general people, and a total of 142 questionnaires were analyzed excluding 13 wrong answers. The nine items on the awareness of paprika showed to be consisted of three factors such as 'Food taste', 'Usability', and 'Economics' by factor analysis. Regarding to the awareness of paprika the positive answer that 'I think paprika is good for health' among the nine questions was the highest at 92.3%. In the preference aspect of shape, blocky type had the highest preference for the shape of paprika, followed by mini and conical types in order of preference (p < 0.001). As for color preference, yellow paprika was the most preferred, followed by orange, red, and green, showing statistical significance. The emotional response of paprika by paprika image showed a statistically significant difference in the four colors. The words such as 'bright', 'clean', and 'spirited' appeared as representative emotional vocabulary for paprika. Multiple regression analysis was performed to examine the effect of paprika on the three factors of awareness, preference, and loyalty due to the quality of life. As a result, the higher the paprika preference and quality of life, and the higher the taste and availability factors, the higher the paprika awareness and loyalty. As the variable that has the most influence on the loyalty of the survey respondents, preference was found to have the highest explanatory power at 43%. From these results, it was judged as a very important factor in the survey on the shape and color preference of paprika. Therefore, the recent increase in awareness that paprika is good for health is thought to act as a positive factor in revitalizing the domestic market and increasing consumption of paprika in the future. Also, among the three types of paprika, the yellow blunt type showed the highest preference. Therefore, in order to produce and promote this type of paprika, it is also important to increase the cultivation to suit the purchasing propensity of consumers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.