• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.578-583
• /
• 2000

We introduce the systematization design method using analogical analysis. The design method can make us predict the characteristic experiment for the magnitude we desire as the expression equation applied continuously. We can induce the design sample the users demand with the verification of the data on optimum design previously. Therefore in case of designing and developing the products systematization design method is very useful for the standardization of the developed goods compatability the reduction of construction time and price. In this paper we present the analogical algorithms of systematization design using similarity theory design factors and processing method of the restriction factors. Also we analyze the output voltage in terms of input voltage and displacement as choosing a differential transformer as the model.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.457-458
• /
• 2008

This paper presents an output common mode current compensation method to achieve both constant Gm and constant gain. A conventional rail-to-rail CMOS op-amp with constant Gm was designed by using complementary differential input stage and current compensation skills. But it doesn't operate constant gain, because of output resistance variation. With $0.18{\mu}m$ CMOS process, the simulation results show that the differential gain variation can achieve less than 1.3dB. And a 60dB gain, a 13.5MHz unity gain-frequency, and 1mW power consumption, when operating at 1.8V and 10pF load.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.21-24
• /
• 2002

This paper presents a fully integrated, wide tuning range differential CMOS voltage-controlled oscillator, tuned by pMOS-varactors. VCO utilizing a novel tuning scheme is reported. Both coarse digital tuning and fine analog tuning are achieved using pMOS-varactors. The VCO were implemented in a 0.18-fm standard CMOS process. The VCO tuned from 1.8㎓ to 2.55㎓ through 2-bit digital and analog input. At 1.8V power supply voltage and a total power dissipation of 8mW, the VCO features a phase noise of -126㏈c/㎐ at 3㎒ frequency offset.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.5-14
• /
• 2005

Continuously variable transmission (CVT) mechanisms combine the functions of a K-H-V type differential gear unit and a V-belt type continuously variable unit (CVU). For the 24 different mechanisms, 12 of them are power circulation modes while the other 12 are power split modes. Some useful theoretical formulas related to speed ratio, power flow and efficiency were derived and analyzed. These mechanisms have many advantages: they decrease CVT size and weight, increase overall efficiency, extend speed ratio range, and generate geared neutral. Compound CVTs were developed by combining the power circulation mode and power split mode, which can offer backward motion, geared neutral, underdrive and overdrive.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.423-429
• /
• 2013

A 6-Gb/s differential voltage mode driver is presented whose output impedance and pre-emphasis level can be controlled independently. The voltage mode driver consists of five binary-weighted slices each of which has four sub-drivers. The output impedance is controlled by the number of enabled slices while the pre-emphasis level is determined by how many sub-drivers in the enabled slices are driven by post-cursor input. A prototype transmitter with a voltage-mode driver implemented in a 65-nm CMOS logic process consumes 34.8-mW from a 1.2-V power supply and its pre-emphasized output signal shows 165-mVpp,diff and 0.56-UI eye opening at the end of a cable with 10-dB loss at 3-GHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.573-575
• /
• 1997

In this paper, the electronic differential system for electric vehicle using neural network is proposed and its performance is evaluated. The input features of NN are obtained by processing the encoder and potentiometer during driving. The 3 layered NN with back propagation algorithm has been used. Evaluation experiments show that the proposed controller is effective in controlling of unknown nonlinear plants.

• 한국음향학회지
• /
• 제19권1호
• /
• pp.84-88
• /
• 2000

본 논문에서는 저전압에서 동작하는 CMOS 아날로그 4상한 멀티플라이어를 설계하였다. 제안된 멀티플라이어는 2개의 완전 차동 트랜스컨덕터로 구성되고 공급 전압을 VT+2VDS,sat+VDS,triode로 낮게 유지할 수 있다. 설계된 아날로그 4상한 멀티플라이어는 1.2V 공급전압에서 0.25㎛ CMOS n-well 공정 파라미터를 이용하여 HSPICE 시뮬레이션 하였다. 시뮬레이션 결과 0.7VP-P 최대 입력에서 THD는 1.28%이다.

• 대한임베디드공학회논문지
• /
• 제15권2호
• /
• pp.95-101
• /
• 2020

In situations where mobile robots are operated either by autonomous systems or human operators, such as smart factories, priority-based teleoperation is crucial for the multiple operators with different priority to take over the right of the robot control without conflict. This paper proposes a priority-based teleoperation system for multiple operators to control the robots. This paper also introduces an efficient joystick-based robot control command generation algorithm for differential-drive mobile robots. The proposed system is implemented with ROS (Robot Operating System) and embedded control boards, and is applied to Pioneer 3AT mobile robot platform. The experimental results demonstrate the effectiveness of the proposed joystick control command algorithm and the priority-based control input selection.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• 대한화학회지
• /
• 제25권2호
• /
• pp.103-109
• /
• 1981

큰 입력지향을 갖는 20개의 sample and hold가 MOSFET으로 switching되는 간편하면서도 비용이 적게드는 analog 기억장치를 제작하였다. 이것은 digital로 3KHz.까지 임의로 조절되는 shift register로 연결되어 있다. 이 장치의 유용성을 보이기 위해 square와 sine파 및 fast-scan voltammetry와 differential pulse polarography의 전류-시간 변화와 같은 전기화학적 실험을 행하였다.