• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.339-347
• /
• 2004

This study aims at calculating the exact soil conversion factor of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative accuracy of the difference was calculated at 0.5% in average. We have calculated the exact soil conversion factor by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with soil conversion factor determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of soil conversion factor, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.22-31
• /
• 2001

The purpose of this study is to compare calculated pollutant loadings using pollutant load unit factors and vector type coverage, and expected mean concentration(EMC) and raster type of digital elevation model(DEM). This study is also focusing on comparison of the advantages and the disadvantages of the two methods, and seeking for a method of calculation of pollutant loadings using DEM. Estimation of pollutant inputs using pollutant load unit factors has limitations in identifying seasonal variations of pollutant loadings. Seasonal changes of runoffs should be considered in the calculation of pollutant loadings from catchments into reservoirs. Evaluation of pollutant inputs using runoff-coefficient and EMC can overcome these drawbacks. Proper EMC and runoff-coefficient values for the Koeup stream catchments of the Koheung estuarine lake were drawn from review of related papers. Arc/Info was employed to establish database of spatial and attribute data of point and non-point pollutant sources and characteristics of the catchments. ArcView was used to calculate point and non-point pollutant loadings. Pollutant loads estimated with either unit factors-coverages, i.e., pollutant load unit factors and vector coverages f point sources and land use, or EMC and digital elevation mode(DEM) were compared with stream monitoring loads. We have found that some differences were shown between monitoring results and estimated loads by Unit Factors-Coverage and EMC-DEM. Monthly variations of pollutant loads evaluated with EMC-DEM were similar to those with monitoring result. The method using EMC-DEM can calculate accumulated flows and pollutant loads and can be utilized to identify stream networks. A future research on correcting the difference between vector type stream using flow direction grid and digitalizing vector type should be conducted in order to obtain more exact calculation of pollutant loadings.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.39-47
• /
• 2003

The purpose of this paper is to present the method of acquiring 3D GIS data using the statistical estimating methods of Well Log for balancing Seismic data. We use the reflection coefficients of seismic data to get the parameters for the reservoir characterization and we balance the reflection coefficients of seismic data using well log to increase the confidence of the estimated result. Well logs are required to balance the reflection coefficients at the point where seismic data are acquired. In this research, we discuss the geostatistical estimation methods and we applied these methods to real data. Kriging gives high weights to the close well logs, which means estimated results are mainly affected by close well log. High value of cross variograms gave big difference on cokriging result comparing to kriging results and low value of cross variogram gave little differences.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.695-703
• /
• 2015

Acceptance criteria for chemical admixtures of cement concrete were investigated in domestic and international specifications. The reliability was verified for solid content test method of chemical admixture examined statistical analysis by round robin test. The applicability of FT-IR spectroscopy for qualitative measurement of multi-compound chemical admixtures verified. From solid content experimental results, outlier analysed using Cochran, Grubbs and Dickson's Q test. Repeatability and reproducibility standard deviation for solid content results showed 0.25 and 0.098% respectively according to KS A ISO 5725-2 procedure, it can be confirmed reliability of test methods. FT-IR spectrum of liquefied or oven-dried chemical admixtures condition showed big differences. It is needed that the FT-IR analysis is performed on dry material. However there's no difference with the applicability of FT-IR spectroscopy for multi-compound chemical admixtures. So the utility of method analysis could not identify.

• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.18-31
• /
• 2002

This study, as a basic research to manage a Chinese Medicine Health Promotion Center by way of showing an example, is a before and after experiment research for simple group to verify a difference with cholesterol, health status and perception of health in order to confirm a effectiveness of diet and regimen according to the 4th status of physical constitution. Research object was chosen of 42 persons who operate a physical constitutional dietary regimen among them after selecting professors and clinical nurses (55 persons) majoring in the science of nursing who participated in Chinese Medicine-oriented Nurse Training Course from Aug. of 2001 to Feb. of 2002 all over the country. Diagnostic tools for physical constitution was used of the questionary that is currently consisted of physical constitution grouping test in Eastern & Western Diagnose Center of K Medical Center, and rating of health status was used of the tool that standardized CMI(Cornell Medical Index) to be available for Korean, and perception measurement for health status was used of a visual analogue scale for the health status that each one perceive personally, and physiological status was measured of cholesterol in blood. Analysis for the collected data was carried out by percentage, $X^2$ test, paired t-test according to research object by using SPSS, and the results of this study are as follows. 1) There was no difference with cholesterol before or after the experiment for objects. As a result of estimation about difference with health status by areas before or after the experiment, there are more improved result in eyes, ears, digestive organs, bones and sinews organs, frequency of a disorder, habit, adaptation status, angry, healthy status than before the experiment. As a whole, after the experiment the health was more improved than before the experiment. As the result to inspect a difference of health perception between before and after experiment, after the experiment the health perception level was improved than before, however there was no meaningful differences. 2) As the result to inspect a difference of cholesterol between before and after experiment according to object's physical constitution, in the case of So-yang-in(a person with the minimum male: according to the male and female principles(the sun and the moon)) among the 4th status of physical constitution there was only meaningful difference statistically, however, after the experiment their cholesterol's value was increased. As the result to inspect the difference of health status between before and after the experiment according to physical constitution, all of Ta-um-in(a person with maximum the female), So-yang-in(with the minimum male), So-um-in(with the minimum female) had a meaningful difference before and after the experiment, which means that in all case by physical constitutional groups, after the experiment their health status was more improved than before the experiment. As the result to inspect a difference of health perception between before and after according to physical constitutions, in the case of Tae-um-in and So-um-in, average score after the experiment was risen than before the experiment so that it means that the level of health perception was improved, however, there was no meaning statistically. According to the above results, if continuous diet and regimen by each physical constitutions could be implemented, it is certain that the health could be maintained and promoted. And, what we are healthy is for oneself to feel it subjectively. However, I think that cholesterol score in blood that we can view objectively could be changed distinctly if we can implement a strict diet and regimen. Accordingly, it is necessary for a method and period of experiment to be more strict and longer. According to the above results, I would like to suggest as follows. 1) In order to understand health status by Korean's physical constitutions and to generalize it, these research will be repeated against much more objects that could be selected by proper grouping method to consider a representative. 2) It is necessary for a research to inspect health status by physical constitution by developing a health status measurement tool that has higher confidence and propriety based on physical constitutional theory.

• Journal of Radiation Protection and Research
• /
• v.39 no.2
• /
• pp.96-102
• /
• 2014

Urine bioassay has been widely used for internal dosimetry due to simple process of sampling and measurement. In this paper, we participated in the NRIP (NIST Radiochemistry Intercomparison Program) hosted by US NIST to carry out a reliable performance test of urine bioassay and introduced the measurement method and results of NRIP-2013. In customary exercise with 60 days of reporting time, bioassay results of 12 radionuclides in the synthetic urine samples were acceptable based on the performance criteria of ANSI N13.30. In emergency preparedness exercise with 8 hours of reporting time, bioassay results of 9 radionuclides showed that differences ranged from -35% to 45%. However, we concluded that urine bioassay applied for emergency preparedness exercise would be applicable for rapid screening and estimation of internal exposure within a difference of ${\pm}45%$ in the event of radiological accidents.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.495-508
• /
• 2019

Tidal datums are key and basic information used in fields of navigation, coastal structures' design, maritime boundary delimitation and inundation warning. In Korea, the Approximate Lowest Low Water (ALLW) and the Approximate Highest High Water (AHHW) have been used as levels of tidal datums for depth, coastline and vertical clearances in hydrography and coastal engineering fields. However, recently the major maritime countries including USA, Australia and UK have adopted the Lowest Astronomical Tide (LAT) and the Highest Astronomical Tide (HAT) as the tidal datums. In this study, 1-hr interval 19-year sea level records (1999-2017) observed at 9 tidal observation stations along the west and south coasts of Korea were used to calculate LAT and HAT for each station using 1-minute interval 19-year tidal prediction data yielded through three tidal harmonic methods: 19 year vector average of tidal harmonic constants (Vector Average Method, VA), tidal harmonic analysis on 19 years of continuous data (19-year Method, 19Y) and tidal harmonic analysis on one year of data (1-year Method, 1Y). The calculated LAT and HAT values were quantitatively compared with the ALLW and AHHW values, respectively. The main causes of the difference between them were explored. In this study, we used the UTide, which is capable of conducting 19-year record tidal harmonic analysis and 19 year tidal prediction. Application of the three harmonic methods showed that there were relatively small differences (mostly less than ±1 cm) of the values of LAT and HAT calculated from the VA and 19Y methods, revealing that each method can be mutually and effectively used. In contrast, the standard deviations between LATs and HATs calculated from the 1Y and 19Y methods were 3~7 cm. The LAT (HAT) differences between the 1Y and 19Y methods range from -16.4 to 10.7 cm (-8.2 to 14.3 cm), which are relatively large compared to the LAT and HAT differences between the VA and 19Y methods. The LAT (HAT) values are, on average, 33.6 (46.2) cm lower (higher) than those of ALLW (AHHW) along the west and south coast of Korea. It was found that the S_a and N₂ tides significantly contribute to these differences. In the shallow water constituents dominated area, the M₄ and MS₄ tides also remarkably contribute to them. Differences between the LAT and the ALLW are larger than those between the HAT and the AHHW. The asymmetry occurs because the LAT and HAT are calculated from the amplitudes and phase-lags of 67 harmonic constituents whereas the ALLW and AHHW are based only on the amplitudes of the 4 major harmonic constituents.

• Journal of Environmental Science International
• /
• v.31 no.9
• /
• pp.793-801
• /
• 2022

This study was carried out to provide basic data for logical forest management by developing a site index curve reflecting the current growth characteristics of Cryptomeria japonica stands in Korea. The height growth model was developed using the Chapman-Richards, Schumacher, Gompertz, and Weibull algebraic difference equations, which are widely used in growth estimation, for data collected from 119 plots through the 7th National Forest Inventory and stand survey. The Chapman-Richards equation, with the highest model fit, was selected as the best equation for the height growth model, and a site index curve was developed using the guide curve method. To compare the developed site index curve with that on the yield table, paired T-tests with a significance level of 5% were performed. The results indicated that there were no significant differences between the site index curve values at all ages, and the p-value was smaller after the reference age than before. Therefore, the site index curve developed through this study reflects the characteristics of the changing growth environment of C. japonica stands and can be used in accordance with the site index curve on the current yield table. Thus, this information can be considered valuable as basic data for reasonable forest management.

• Acute and Critical Care
• /
• v.33 no.4
• /
• pp.246-251
• /
• 2018

Background: Target temperature management (TTM) improves neurological outcomes for comatose survivors of out-of-hospital cardiac arrest. We compared the efficacy and safety of a gel pad cooling device (GP) and a water blanket (WB) during TTM. Methods: We performed a retrospective analysis in a single hospital, wherein we measured the time to target temperature ($<34^{\circ}C$) after initiation of cooling to evaluate the effectiveness of the cooling method. The temperature farthest from $33^{\circ}C$ was selected every hour during maintenance. Generalized estimation equation analysis was used to compare the absolute temperature differences from $33^{\circ}C$ during the maintenance period. If the selected temperature was not between $32^{\circ}C$ and $34^{\circ}C$, the hour was considered a deviation from the target. We compared the deviation rates during hypothermia maintenance to evaluate the safety of the different methods. Results: A GP was used for 23 patients among of 53 patients, and a WB was used for the remaining. There was no difference in baseline temperature at the start of cooling between the two patient groups (GP, $35.7^{\circ}C$ vs. WB, $35.6^{\circ}C$; P=0.741). The time to target temperature (134.2 minutes vs. 233.4 minutes, P=0.056) was shorter in the GP patient group. Deviation from maintenance temperature (2.0% vs. 23.7%, P<0.001) occurred significantly more frequently in the WB group. The mean absolute temperature difference from $33^{\circ}C$ during the maintenance period was $0.19^{\circ}C$ (95% confidence interval [CI], $0.17^{\circ}C$ to $0.21^{\circ}C$) in the GP group and $0.76^{\circ}C$ (95% CI, $0.71^{\circ}C$ to $0.80^{\circ}C$) in the WB group. GP significantly decreased this difference by $0.59^{\circ}C$ (95% CI, $0.44^{\circ}C$ to $0.75^{\circ}C$; P<0.001). Conclusions: The GP was superior to the WB for strict temperature control during TTM.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.392-400
• /
• 2001

This paper proposes an illuminant estimation algorithm that estimates the spectral power distribution of an incident light source from a single image. The proposed illumination recovery procedure has two phases. First, the surface spectral reflectances are recovered in the maximum achromatic region (MAR) which is the most achromatic and highly bright region of an image after removing partially the effect of illumination using a modified gray world algorithm. Here, the surface reflectances of MAR are estimated using the principal component analysis method along with a set of given 1269 Munsell samples. Second, the Population of reflected lights is determined with 1269 Munsell samples and a set of illuminations then the spectral distribution of re(looted lights of MAR is selected from the spectral database. That is, color differences are compared between the reflected lights of the MAR and the spectral database, which is the set of reflected lights built by the given set of Munsell samples and illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MAR by the average surface reflectances of the MAR. In order to evaluate the proposed algorithm, experiments with artificial scenes, which are exposed to chromatic illuminants, were performed and the spectral distribution of estimated illumination and color difference are compared with results of the conventional method.