• 제목/요약/키워드: Difference coefficient (D)

검색결과 328건 처리시간 0.024초

산란계사의 계란 이송단계에 따른 파란발생 실태분석 (Analyses on the Status of Eggshell Breakage in the Step of Egg Conveyer System of the Laying Hen House)

  • 오권영;유병기;노진상;최동수;최광재
    • 한국축산시설환경학회지
    • /
    • 제14권1호
    • /
    • pp.47-52
    • /
    • 2008
  • 1. 조사농장의 산란율은 하이라인, 이사브라운 모두 $85{\sim}93%$ 수준 이였으며, 농가자체 파란율은 하이라인 $1.5{\sim}2.2%$, 이사브라운 $1{\sim}1.4%$이었다. 2. 계란 이송단계별 파란발생비율은 집란벨트 4.7%> 엘리베이터 2.5%> 선란기 1.7%> 컨베이어 0.9% 순 이었다. 3. 집란벨트에서 엘리베이터로 이송 중 계란이송가이드를 설치할 경우 약 1%의 파란경감 효과가 있는 것으로 나타났다. 4. 하이라인 브라운은 주령이 높아지면서 파란율은 높아지고, 파각력은 낮아지는 것으로 나타났으며, 회귀계수 분석 유의성은 $R^2=0.7$로 파각력의 변화가 파란율에 영향을 미치는 것으로 분석되었다. 5. 이사브라운에서는 환우 전에 비하여 환우 후 파각력이 높아진 것으로 나타났다. 6. 난각 두께와 파각력, 그리고 접촉 후 파각변위와 파각력과의 관계에서 이들 함수의 변수간에 회귀관계는 유의성이 나타나지 않았다.

  • PDF

MIMIC 기술을 이용한 광대역 W-band Tandem 커플러 (Broadband W-band Tandem coupler using MIMIC technology)

  • 이문교;안단;이복형;임병옥;이상진;문성운;전병철;김용호;윤진섭;김삼동;이진구
    • 대한전자공학회논문지TC
    • /
    • 제44권7호통권361호
    • /
    • pp.105-111
    • /
    • 2007
  • 본 논문에서는 W-band($75{\sim}110\;GHz$) 주파수 영역에서 동작하는 CPW(Coplanar Waveguide) 구조의 3-dB 방향성 커플러를 MIMIC(Millimeter-wane Monolithic Integrated Circuit) 공정기술로 설계 및 제작하였다. 강한 결합계수 특성을 갖는 edge-coupled CPW 라인은 서로 다른 우 기 모드 위상속도에 의해 좋지 않은 방향성을 갖는다. 이를 극복하기 위하여 같은 우 기 위상속도를 갖는 edge-coupled CPW 라인을 2단으로 평행하게 연결하여 3-dB의 강한 커플링을 유도할 수 있는 Tandem 구조를 W-band에서 제안하였다. 제안된 Tandem 커플러는 기존의 다층기판 구조나 와이어 본딩 구조가 아닌 에어브리지 MIMIC 공정기술을 통해서 단일평면상에 제작되었다. 제작된 커플러는 $75{\sim}100\;GHz$의 넓은 주파수 영역에서 $2.9{\sim}3.6\;dB$의 결합계수와 $91.2{\pm}2.9^{\circ}$의 우수한 위상차 특성을 나타내었다.

급성 중독환자에서 삼투압 계산식으로 추정된 에탄올 농도의 유효성 검증 (Discrepancies and Validation of Ethanol Level Determination with Osmolar Gap Formula in Patients with Suspected Acute Poisoning)

  • 정해원;이미진;조재완;안재윤;김창호
    • 대한임상독성학회지
    • /
    • 제17권2호
    • /
    • pp.47-57
    • /
    • 2019
  • Purpose: Osmolar gap (OG) has been used for decades to screen for toxic alcohol levels. However, its reliability may vary due to several reasons. We validated the estimated ethanol concentration formula for patients with suspected poisoning and who visited the emergency department. We examined discrepancies in the ethanol level and patient characteristics by applying this formula when it was used to screen for intoxication due to toxic levels of alcohol. Methods: We retrospectively reviewed 153 emergency department cases to determine the measured levels of toxic ethanol ingestion and we calculated alcohol ingestion using a formula based on serum osmolality. Those patients who were subjected to simultaneous measurements of osmolality, sodium, urea, glucose, and ethanol were included in this study. Patients with exposure to other toxic alcohols (methanol, ethylene glycol, or isopropanol) or poisons that affect osmolality were excluded. OG (the measured-calculated serum osmolality) was used to determine the calculated ethanol concentration. Results: Among the 153 included cases, 114 had normal OGs (OG≤14 mOsm/kg), and 39 cases had elevated OGs (OG>14). The mean difference between the measured and estimated (calculated ethanol using OG) ethanol concentration was -9.8 mg/dL. The 95% limits of agreement were -121.1 and 101.5 mg/dL, and the correlation coefficient R was 0.7037. For the four subgroups stratified by comorbidities and poisoning, the correlation coefficients R were 0.692, 0.588, 0.835, and 0.412, respectively, and the mean differences in measurement between the measured and calculated ethanol levels were -2.4 mg/dL, -48.8 mg/dL, 9.4 mg/dL, and -4.7 mg/dL, respectively. The equation plots had wide limits of agreement. Conclusion: We found that there were some discrepancies between OGs and the calculated ethanol concentrations. Addition of a correction factor for unmeasured osmoles to the equation of the calculated serum osmolality would help mitigate these discrepancies.

식물공장 자동화를 위한 공압 실린더를 이용한 육묘베드 이송장치의 이송력 특성 (Transfer Force Characteristics of Seedling Bed Transfer Equipment Using Pneumatic Cylinder for Automation of Plant Factory)

  • 민영봉;박상민;이공인;김동억;강동현;문성동
    • Journal of Biosystems Engineering
    • /
    • 제37권3호
    • /
    • pp.155-165
    • /
    • 2012
  • This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

무산소 활성오니공정을 이용한 판지공장 폐수처리의 동력학적 해석 및 설계분석 (Bio-kinetic and Design Analysis for Box-mill Wastewater Treatment Using Anoxic Activated Sludge Process)

  • 조용덕;이상화;김영일
    • 대한환경공학회지
    • /
    • 제28권10호
    • /
    • pp.1090-1097
    • /
    • 2006
  • 판지공장 인쇄폐수에 무산소 활성오니공정을 적용한 결과 $TCOD_{Mn}=90{\sim}94%$, $Color=58{\sim}81%$의 높은 제거효율을 얻었다. 산업현장 판지공장 폐수에 대한 무산소 활성오니공정의 설계분석을 위하여 Monod식에 의한 동력학적계수를 추정한 결과 $K_{max}$(최대 기질제거속도)=0.52 $day^{-1}$, $K_s$(반포화 기질농도)=314 mg/L, $K_d$(내생호흡계수)=0.274 $day^{-1}$, y(미생물의 합성계수)=0.908 mg/mg, ${\mu}_{max}$(최대 비생장속도)=0.472 $day^{-1}$로 산출되었다. 설계분석을 위한 부하인자의 값은 F/M비=$0.043{\sim}0.07$ kg-$TCOD_{Mn}$/kg-SS-day, BOD 용적부하=$0.18{\sim}0.3$ kg-$TCOD_{Mn}/m^3-day$, ${\theta}_x$(미생물 체류시간)=$=6.8{\sim}26.4$ day로 현장 검증되었다. 이러한 부하인자의 값을 미생물의 성장 동력학과 연계시켜 볼 때 F/M비는 ${\theta}_x$에 반비례하고, 단위측면에서 F/M비는 ${\mu}_{max}$와 같아야 하나 F/M비와 ${\mu}_{max}$는 상당한 차이가 있음을 알 수 있었다. 따라서 미생물의 성장 동력학을 이용한 무산소 활성오니공정을 설계하고자 할 때에는 충분한 안전율이 요구되는 것으로 사료되었다.

하천에 설치된 횡구조물의 영향 및 섬진강 수계의 어류 풍부도 예측 (Impact of the Crossed-Structures Installed in Streams and Prediction of Fish Abundance in the Seomjin River System, Korea)

  • 문운기;노다혜;유재상;임오영;김명철;김지혜;이정민;김재구
    • Ecology and Resilient Infrastructure
    • /
    • 제9권2호
    • /
    • pp.100-106
    • /
    • 2022
  • 섬진강 수계 210개 지방하천을 대상으로 하천연장과 보 밀도 대비 어류 출현종 현황을 분석하였다. 하천연장에 따른 어류 출현종수는 비선형지수함수 (Nonlinear exponential relationship) 관계를 보였다. 모델에 따른 계수값 (b)은 0.03이며, 결정계수(R2)은 약 59.0%인 것으로 나타났다. 모델식에 따른 예측기대종수는 실제 출현종수와 차이를 보였으며, 대상하천 가운데 약 110개 하천 (약 52.4%)에서 실제 출현종수는 예측기대종수보다 낮게 나타났다. 한편 섬진강 수계 하천에서 나타난 평균 보 밀도는 약 2.7개/km였으며, 이는 타 수계 하천과 비교시 월등히 높은 수치였다. 보 밀도 지표 (Index of Weir's Density, IWD)에 따른 어류출현종수간의 2-DKS 분석 결과 어류 다양성에 영향을 주는 보 밀도 역치값 (Threshold value)은 약 2.5개/km인 것으로 나타났다 (Dmax=0.048, p<0.05). 실제 보 밀도 지표가 역치값 이상인 경우 어류 출현종수 대비 기대 종수비율은 70% 미만으로 낮아졌다. 따라서, 향후 수생태계 연속성 확보를 위한 보 밀도는 역치값 이하로 관리하는 것이 필요하다.

아버지의 양육태도 및 관심도와 자녀의 인성과의 상관관계 (A Study on the Relation between Father's Child-Rearing Attitude or Child-Concern and Children's Personality)

  • 이행자
    • 대한가정학회지
    • /
    • 제17권2호
    • /
    • pp.83-105
    • /
    • 1979
  • The purpose of this study is 1) to find out several factors which related to father's rearing attitude and father's concern influencing on children's personality development and 2) to examine closely the correlation between father and children's personality. For the study, cases of 914 children from Seoul and Chong-Ju were sampled to put their personality on test and to investigate on the father's attitude for child rearing and child -concern. The instruments used in this research are question aires, which the investigators made, to examine the father's attitude for child-rearing and child-concern, and the child-personality test performed by Ph. D.B.M.J eong. The results obtained can be summarized as follows : 1. Most fathers were found to be more affectionate to daughters then to sons in their attitude for child-rearing and child-concern , and fathers in Chong-Ju had the tendency to have morn concern about the first child. 2. The more educated fathers, public official or company employee, and Christian or Catholic , showed much more concern about their children, which was shown or Catholic ,showed much more concern about their children , which was shown in this study as statistically significant (P<.0.1, F-test). 3. There were no sex differences in correlations between father's child-rearing attitude or child-concern and child-personality. 4. Father's child-rearing attitude was highly related to child's birth order, That is : the first child showed the low coefficient in general activity and impulsiveness, and showed the high coefficient in emotional stability of personality traits when father's child-rearing attitude was high. 5. Regardless of sex, birth order, economic level, children showed high coefficient in dominance, reflectiveness, and sociability of personality traits when father's child-concern was high. 6. Children in Chong-Ju also presented high marks at percentile in emotional stability when they liked grand fathers and fathers. 7. Children who identify their fathers showed the high marks in emotional stability, specially cases of Chong-Ju were statistically more significant (P<0.5, F-test). 8. There were much difference in percentile marks of personality traits among children in Seoul and Chong -Ju ; the marks which children in Chong-ju made were average 13.71 score lower than those of Seoul in general -activity , dominace, impulsiveness reflectiveness, sociability only except emotional stability.

  • PDF

대동맥판 역류질환 진단시 이면성심초음파 박출계수의 보정을 통한 오진율 개선에 관한 연구 (A study on improvement of misdiagnosis rate in aortic regurgitation disease by physically correcting EF in 2D echo cardiography)

  • 최관우;손순룡
    • 한국산학기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.2142-2147
    • /
    • 2012
  • 본 연구는 좌심실의 박출계수가 주된 예후인자인 대동맥판 역류환자를 대상으로 cine MRI와 이면성심초음파의 물리적인 시간해상도 차이를 분석하여 이면성심초음파의 박출계수에 보정함으로써 오진율을 감소시키고자 하였다. 연구대상은 2010년 2월부터 2011년 12월까지 이면성심초음파와 cine MRI를 병행한 환자 110명 중 대동맥판 역류환자 37명을 대상으로 하였다. 각 검사 장비별로 이완기말 면적, 수축기말 면적, 일회 심박출 면적을 측정하였으며, 측정된 값을 이용하여 박출계수를 구하고, 이면성심초음파와 cine MRI의 정상 수치 범위를 비교하여 보정 전 오진율을 평가하였다. 이면성심초음파와 cine MRI의 물리적인 시간해상도 차이는 두 측정치간의 상관관계를 알아본 후 선형회귀분석을 이용하여 회귀계수를 도출하고 도출된 회귀계수를 이용하여 이면성심초음파의 박출 계수에 보정하였다. 보정된 이면성심초음파 박출계수의 신뢰도를 평가하기 위해 Bland-Altman plot를 통해 측정치간 오차를 분석하였고, 이 수치를 cine MRI의 정상 수치 범위와 비교하여 보정 후 오진율을 재평가하였다. 연구결과, 이면성심초음파 박출계수의 물리적 시간해상도 보정 전 오진율은 32.4%(12명)로 높게 나왔고, 보정 후 오진율은 18.9%(7명)로 13.5% 감소하였다. 또한 Bland-Altman plot에서 확인한 보정된 이면성심초음파 박출계수는 cine MRI의 박출계수와의 일치도가 상당히 높다는 것을 알 수 있다. 결론적으로 대동맥판 역류질환 진단시 단순한 이면성심초음파의 박출계수로만 감별하는 것은 오진율을 높일 수 있으므로 오진율이 낮은 cine MRI장비의 물리적 특성을 고려한 시간해상도의 차이를 보정함이 중요하며, 본 연구를 통하여 오진율 감소를 확인할 수 있었으므로 임상 적용의 유용성이 높다고 사료된다.

RFID 태그용 다이폴 안테나의 부착 지판에 따른 실험적 성능 평가 (Experimental Performance Evaluation according to the Sticked Backside Plate of Dipole Antenna for RFID Tag)

  • 민경식;김진우
    • 한국전자파학회논문지
    • /
    • 제18권3호
    • /
    • pp.273-281
    • /
    • 2007
  • 이 논문은 900 MHz대역의 RFID 태그용 다이폴 안테나를 설계하여, 이 안테나가 부착되는 물체에 의한 안테나의 성능이 실험적으로 평가되었다. 전기적 특성이 다른 유전체, 자성체 및 도체에 다이폴 안테나를 부착하였을 때, 부착된 매질의 종류, 크기 및 높이의 변화에 따라 안테나의 반사계수와 방사 패턴이 변화되는 것을 실험적으로 평가하였다 안테나가 유전체의 표면에 부착되었을 때, 측정된 반사계수와 방사 패턴은 비유전율의 영향으로 인해 약 40 MHz의 공진 주파수 편이와 약 $1\sim3dB$ 정도의 감쇠를 보였다. 부착 지판의 크기에 의한 주파수 편이가 관측되었으나, 부착 지판을 가진 다이폴 안테나의 측정된 방사 패턴은 부착 지판이 없는 다이폴 안테나의 방사 패턴과 유사하였다. 부착 지판이 도체나 자성체인 경우, 다이폴 안테나와 부착 지판 사이의 거리에 의한 주파수 편이와 위상차 때문에, 910 MHz에서 약 5 dB 이상의 방사 패턴 진폭의 저하가 관측되었다.

액체-입자 Swirling 유동층에서 유동입자 흐름 및 열전달 특성 (Characteristics of Particle Flow and Heat Transfer in Liquid-Particle Swirling Fluidized Beds)

  • 손성모;강석환;강 용;김상돈
    • Korean Chemical Engineering Research
    • /
    • 제44권5호
    • /
    • pp.505-512
    • /
    • 2006
  • 직경이 0.102 m이고 높이가 2.5 m인 액체-입자 swirling(나선)흐름 유동층에서 유동 입자의 흐름 및 열전달 특성을 고찰하였다. 액체유속($U_L$), 유동 입자의 크기($d_p$) 그리고 연속상인 액체의 나선 유도흐름 액체량의 비($R_s$)가 유동층 내 유동입자의 체류량 유동층 내부 열원과 유동층간의 총괄 열전달 계수에 미치는 영향을 검토하였다. 액체-입자 나선흐름 유동층에서 입자 체류량은 입자의 크기와 나선유도흐름 액체량의 비가 증가함에 따라서 증가하였으나, 액체유속의 증가에 따라서는 감소하였다. 유동층 내부에서 나선 유도 흐름 액체량의 비가 0.1~0.3인 경우에 유동 입자의 국부체류량은 유동층 중심부에서 큰 값을 나타내었으나, $R_s$의 값이 0.5일 때는 반경 방향 입자 체류량은 거의 균일한 분포를 보이며, $R_s$의 값이 0.7일 때는 유동층 중심부의 입자 체류량이 상대적으로 감소하는 경향을 나타내었다. 유동층 내부열원과 유동층간의 열전달 특성은 열원 표면과 유동층간의 온도차 요동 자료의 위상공간 투영과 kolmogorov 엔트로피 해석으로 고찰할 수 있었으며, 나선 유도 흐름 액체량의 비($R_s$)가 0.1에서 0.5까지 증가할수록 온도차 요동 자료의 위상공간 투영은 점점 안정되고 규칙성이 증대되는 상태를 나타내고, kolmogorov 엔트로피 값은 감소하는 경향을 나타내었다. 열원 표면과 유동층간의 온도차 요동 자료의 kolmogorov 엔트로피 값은 액체의 유속이 증가함에 따라 최대값을 나타내었다. 열원과 유동층간의 총괄 열전달 계수는 액체유속, 층공극률, 나선 유도 흐름 액체량의 비가 증가함에 따라서 최대값을 나타내었으며, 유동 입자의 크기가 증가함에 따라 증가하였다. 내부 열원과 유동층간의 총괄 열전달 계수가 최대값을 나타낼 때의 액체의 유속 조건에서 온도차 요동자료의 kolmogorov 엔트로피의 값도 최대값을 나타내었다. 액체-입자 나선흐름 유동층에서 입자 체류량과 열전달 계수를 무차원군의 상관식으로 나타낼 수 있었다.