• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.465-474
• /
• 2005

본 논문은 잡음이 존재하는 전송 선로를 통해 전송된 영상의 손실 블록에 대해 방향성 복구 방법을 제안한다. 손실된 DCT 계수나 화소값들은 손실된 블록 주위의 마주보는 블록 간 DC값 차이(DDC:Difference of DC)와 AC계수의 유사성(SAC: Similarity of AC)으로 구성된 방향성 척도에 의해 적응적으로 선택되어진 이웃 블록들을 이용해서 선형 보간법으로 복구된다. 본 논문에서 제안하는 방향성 복구 방법은 고정된 이웃 블록을 이용하지 않고 국부 영상 내의 방향성 정보에 따라 적응적으로 변하는 이웃 블록들이 사용하기 때문에 강한 에지 성분이나 텍스쳐 영역에 대해서 효과적이다. 본 논문에서는 DDC와 SAC로 구성된 새로운 방향성 척도(CDS: Combination of DDC and SAC)를 구하고 그 방향성 척도를 통해 국부 영역의 특성에 따라 손실된 블록을 복구하기 위한 블록들을 선택한다. 모의실험에서 제안 방법은 기존의 방법보다 평균적으로 약 0.6dB의 PSNR 개선을 보였다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.71-77
• /
• 2000

The color of an esthetic restorative material is controlled primarily by thickness of the material and background color. Although the effects of the two factors on the color coordinates of esthetic dental materials have been reported, the mechanism has not been clarified well enough to explain the effects quantitatively. The purpose of this study was to evaluate the effect of thickness and background color on the color of tooth colored restorative materials quantitatively. One hundred sixty samples were fabricated from two commercial light-cured composite resins and two commercial compomers. The color characteristics and changes in the color coordinates were measured by a tristimulus colorimeter (Model TC-6FX, Tokyo Denshoku Co. Japan) using the CIELAB system. The results were as follows: 1. As thickness increased from 1.0 to 4.0mm, values of $L^*$ $a^*$ $b^*$ changed irregulary for white and dentin color background, but showed no obvious difference in color for black background. 2. The colors of composite resins and compomers were significantly influenced by background color. 3. The color difference was recognized even the same shade name in four representative kinds of composite resins and compomers. 4. As thickness changed, values of color difference for same products and same background color showed constancy, but showed difference for different background color.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.91-100
• /
• 2018

The setting of values on door hinge mounting compensation for door assembly tolerance is a constant quality issue in vehicle production. Generally, heuristic methods are used in satisfying appropriate door gap and level difference, flushness to improve quality. However, these methods are influenced by the engineer's skills and working environment and result an increasement of development costs. In order to solve these problems, the system which suggests hinge mounting compensation value using CAE (Computer Aided Engineering) analysis is proposed in this study. A structural analysis model was constructed to predict the door gap and level difference, flushness through CAE based on CAD (Computer Aided Design) data. The deformations of 6-degrees of freedom which can occur in real vehicle doors was considered using a stiffness model which utilize an analysis model. The analysis model was verified using 3D scanning of real vehicle door hinge deformation. Then, system model which applying the structural analysis model suggested the final adjustment amount of the hinge mounting to obtain the target door gap and the level difference by inputting the measured value. The proposed system was validated using the simulation and showed a reliability in vehicle hinge mounting compensation process. This study suggests the possibility of using the CAE analysis for setting values of hinge mounting compensation in actual vehicle production.

• 대한물리의학회지
• /
• 제17권2호
• /
• pp.1-10
• /
• 2022

PURPOSE: This study examined the effects of the low dye taping technique on the static and dynamic balancing ability and navicular bone drop when the low dye taping technique was divided into elastic and non-elastic taping. METHODS: The subjects of the study were 31 volunteers without musculoskeletal disorders. The length (L) and anterior (A), posteromedial, and posterolateral values of the arch in the NO (normal eyes open), NC (normal eyes closed), PO (pillow with eyes open), and PC (pillow with close eyes closed) states were evaluated when barefoot and when Kinesio tape and non-elastic tape were applied. The measurements were analyzed using repeated ANOVA and an independent t-test. Post hoc tests were performed using a Fisher's LSD. RESULTS: A significant difference was found in the arch L and A values using a foot scanner (p < .05). In addition, there was a significant difference in dynamic balance in the three directions (p < .05), and no difference was found in the case of static balance. As a result, non-elastic tape application helps improve the dynamic balance ability and arch of the foot. CONCLUSION: The non-elastic tape technique is helpful for the foot arch function, and there is no difference in the static balance ability between Kinesio tape and non-elastic tape. Nevertheless, non-elastic tape is more helpful for the dynamic balance ability than Kinesio taping.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.722-729
• /
• 2005

Design analysis of the solid oxide fuel cell and gas turbine combined power system is performed considering different methods for preheating cell inlet air. The purpose of air preheating is to keep the temperature difference between cell inlet and outlet within a practical design range thus to reduce thermal stress inside the cell. Three different methods considered are (1) adopting a burner in front of the cell, (2) adopting a preheater (heat transfer from the main combustor) in front of the cell and (3) using recirculation of the cathode exit gas. For each configuration, analyses are carried out for two values of allowable maximum cell temperature difference. Performance characteristics of all cases are compared and design limitations are discussed. Relaxation of the cell temperature difference (larger difference) is proved to ensure higher efficiency. Recirculation of the cathode exit gas exhibits better performance than other methods and this advantage becomes more prominent as the constraint of the cell temperature difference becomes more severe (smaller temperature difference).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.249-251
• /
• 2001

This paper presents performance analysis on a low pass filter of a CT saturation detecting algorithm using difference. At the instants of beginning/end of saturation, the shapes of the secondary current are changed significantly though secondary currents are continuous. At the instants, the second-order or third-order difference of the secondary current has big values because of discontinuity of the first order difference. Thus, the third difference of the current is used to detect the beginning/end of CT saturation. An antialiasing low pass filter removes high frequency components and causes phase lag. A CT saturation detecting algorithm using difference of CT secondary currents is affected by the low pass filter. The algorithm is tested with cutoff frequencies of the filter for the two sampling rates of 64[S/C] and 32 [S/C]. The results of various test cases indicate satisfactory performance of the algorithm.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1302-1306
• /
• 2005

This study has Performed to develop rehabilitation model for determination of optimal rehabilitation time on the Cast Iron Pipes (CIP) with diameter less than 300 mm in water pipeline network and to analysis the sensitivity on the rehabilitation times of developed model. In the result from the application of the field, the renovation time was faster about 10 years than the replacement time. Especially, as the difference between rehabilitation and replacement time on E-CIP was about from 3 to 5 years, and it was thought that the replacement was effective on E-CIP. To sensitivity analysis, the discount rate of coefficient was fixed at 0.08, and the values of initial year break rate(N($t_o$) and growth rate coefficient(A) were adjusted in values of 0.0009, 0.0018, 0.0027, and 0.05, 0.10, 0.15 respectively. When the values of N($t_o$) and A was increased, the results from the time of rehabilitation and replacement was faster It was thought that N($t_o$), 0.018 was reliable values on the applied pipeline through the result of the study. In case of A, the values of A above 0.1 was thought to be Proper.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.649-656
• /
• 2000

Consolidation of the ground surrounding the sand piles is delayed by well resistance and smear effect. This study is executed to understand the factors that affect the characteristics of consolidation. This was accomplished by utilizing the estimated and measured values of the soil properties through the monitoring of the ground surrounding the sand piles. When it is assumed that the horizontal coefficient is equal to the vertical coefficient of consolidation, the estimated values is exceedingly similar to the measured values. The properties of the initially disturbed soil by the sand pile installation seemed to improve through the process of consolidation with the passage of time. From the results of the analysis of the settlement measurement, the measured values occurred about 60～90% of the predicted values. Considering the initial radical compression deformation, according to the theory of cavity expansion, the difference between the two appears to be in good agreement. In this study, to understand the behavioral characteristics of the ground surrounding the sand piles requires estimation through considering the initial radial compression as well as smear effect of the soil disturbance and well resistance.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.14-25
• /
• 1973

The measurements includings 22 items such as height, weight, body width were carried out for Korean male and female students, one hundred each, from 18 to 24 years old. The correlation coefficient was calculated for every two items. The values are basic for the Clothing construction and the Pattern grading. The results are as follows : 1) The measuring values are as shown in Table 1 and the index are as shown in Table 2. 2) The correlation coefficient of length to length is larger than that of length to girth and that of length to width. The correlation coefficient of girth to girth is larger than girth to length and that of girth to width. The correlation coefficient of width to width does not show remarkable difference from those of others. 3) The correlation coefficient values of weight to lengths, weight to lengths, weight to girths and weight to width are larger. Among these, the correlation coefficient of weight to girths is the largest. 4) The correlation coefficient in general shows almost positive values except a few exception showing negative values. 5) No meaning differences are found between males and females.

• 한국식품조리과학회지
• /
• 제28권3호
• /
• pp.241-247
• /
• 2012

In this study, the preparation characteristics of cream cheese added mousse cake which can easily be accessible among the mousse cakes, have drawn a lot of attention from the modern people, However, there have been a lack of studies that focused on the manufacturing of the mousse cake with a various added proportion rates of main ingredients, fresh cream in mousse cake by 0%, 25%, 35%, 45%, and 55%. While the sugar concentration has increased, except for the control group, there is no significant difference. In case of chromaticity, it has shown high level at L values. In addition, values have shown bigger values as increasing the added amount, and b values have shown smaller values as increasing the added amount. For moisture content, it has shown as steadily increasing by heightening the added amount of cream cheese. For texture, CM3 added by 35% in all the items, except for hardness, has shown the best result and CM3 added by all 35% in all the items, has also been evaluated as highest. Based on all the results, it can be concluded that the addition of cream cheese by 35% to fresh cream is most appropriate, on manufacturing the cream cheese mousse cake.