• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.85-93
• /
• 2007

본 논문에서는 다수의 병렬 입.출력 환경을 위한 높은 노이즈 마진을 갖고 있는 LVDS I/O 회로를 소개한다. 제안된 LVDS I/O회로는 송신단과 수신단으로 구성되어 있으며 송신단 회로는 차동위상 분할기와 공통모드 피드백(common mode feedback)을 가지고 있는 출력단으로 이루어져 있다. 차동위상 분할기는 SSO(simultaneous switching output) 노이즈에 의해 공급전압이 변하더라도 안정된 듀티 싸이클(duty cycle)과 $180^{\circ}$의 위상차를 가진 두 개의 신호를 생성한다. 공통모드 피로백을 가지고 있는 출력단 회로는 공급전압의 변화에 상관없이 일정한 출력전류를 생성하고 공통모드 전압(common mode voltage)을 ${\pm}$0.1V 이내로 유지한다. LVDS 수신단 회로는 VCDA(very wide common mode input range differential amplifier)구조를 사용하여 넓은 공통 입력전압 범위를 확보하고 SSO 노이즈에 의한 공급 전압의 변화에도 안정된 듀티 싸이클(50% ${\pm}$ 3%)을 유지하여 정확한 데이터 복원이 가능하다. 본 논문에서 제안한 LVDS I/O 회로는 0.18um TSMC 라이브러리를 기본으로 하여 설계 되었으며 H-SPICE를 이용하여 시뮬레이션 하였다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.334-338
• /
• 2009

In this paper, We report the miniaturization of superconducting microwave power dividers based on lumped element equivalent circuits. To do this, we analyzed a conventional branch-type power divider by using an ABCD matrix under even and odd mode excitation. Then, we calculated each lumped element impedance throughout this analysis of a transmission line matrix. Also we simulated our equivalent circuits made of lumped elements by using a full wave analysis, em Sonnet. Our deign of microwave power divider based on simulated results was fabricated on high-$T_c$ superconducting thin films deposited on MgO substrate. Experimental results were reported in terms of bandwidth, center frequency, and phase difference between $S_{21}$ and $S_{31}$. We confirm that our design will be useful in the future microwave power systum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.278-281
• /
• 1988

This paper realizes the multi-output truncated difference circuits using current mode CMOS, and presents the algorithm designing multi - valued logic functions of a given multivalued truth tables. This algorithm divides the discrete valued functions and the interval functions, and transforms them into the truncated difference functions. The transformed functions are realized by current mode CMOS. The technique presented here is applied to MOD4 addition circuit and GF(4) multiplication circuit.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.229-240
• /
• 1995

This paper proposes a new weighted random pattern testing technique to detect path delay faults in combinational logic circuits. When computing the probability of signal transition at primitive logic elements of CUT(Circuit Under Test) by the primary input, the proposed technique uses the information on the structure of CUT for initialization vectors and vectors generated by pseudo random pattern generator for test vectors. We can sensitize many paths by allocating a weight value on signal lines considering the difference of the levels of logic elements. We show that the proposed technique outperforms existing testing method in terms of test length and fault coverage using ISCAS '85 benchmark circuits. We also show that the proposed testing technique generates more robust test vectors for the longest and near-longest paths.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1167-1174
• /
• 2004

The method to consider gravity effect on the performance of a condenser is developed, and a simple condenser having 'nU' type two circuits is analyzed. Each circuit has the same length and inlet air-side operational conditions. The only difference between two circuits is the direction of refrigerant flow, which is exactly opposite each other between the upper 'n' type circuit and the lower 'U' type circuit. It is shown that the gravity makes the distribution of refrigerant flow uneven in the two circuits at lower refrigerant flow rates; heat transfer rate also becomes uneven. Moreover, much of the refrigerant exists as liquid state in the circuit having low refrigerant flow rate, which will make the cycle balance unstable in the refrigeration cycle system like a heat pump.

• 한국컴퓨터정보학회논문지
• /
• 제13권6호
• /
• pp.211-216
• /
• 2008

휴대전화를 통해서 양질의 DMB(Digital Multimedia Broadcasting) 서비스를 받기 위하여 지하나 건물사이 음영지역을 제거하기 의한 갭필러(Gap filler) 안테나가 필요하다. 동축 급전선과 4개의 임피던스 정합회로를 필요로 하는 종래의 방식에 비하여 PCB의 피딩 라인에 의한 위상 차이를 이용한 Quadrifilar Helical Antenna(QHA)를 설계하고 제작한다. MicroWave Studio를 이용한 시뮬레이션을 통하여 기존 방식의 QHA에 비해 안테나의 크기와 직경이 안테나 특성에 많은 영향을 주는 것을 파악하여 QHA 제작에 활용하였다. 시뮬레이션을 통한 설계 데이터를 근거로 별도의 임피던스 정합회로가 필요 없는 QHA를 제작하여, 전기적 특성을 측정한 결과 설계치와 유사한 특성을 얻었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.617-624
• /
• 2000

The negative weight can be ofter seen in Hopfield neural network, which is difficult to implement negative conductance in circuits. Usually, the inverted output of amplifier is used to avoid negative resistors for expressing the negative weights in hardware implementation. However, there is some difference between using negative resistor and the inverted output of amplifier for representing the negative weight. This difference is discussed in this paper.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.622-629
• /
• 2015

Cu circuits were successfully fabricated on flexible PET(polyethylene terephthalate) substrates using wettability difference and electroless plating without an etching process. The wettability of Cu plating solution on PET was controlled by oxygen plasma treatment and $SiO_x$-DLC(silicon oxide containing diamond like carbon) coating by HMDSO(hexamethyldisiloxane) plasma. With an increase of the height of the nanostructures on the PET surface with the oxygen plasma treatment time, the wettability difference between the hydrophilicity and hydrophobicity increased, which allowed the etchless formation of a Cu pattern with high peel strength by selective Cu plating. When the height of the nanostructure was more than 1400 nm (60 min oxygen plasma treatment), the reduction of the critical impalement pressure with the decreasing density of the nanostructure caused the precipitation of copper in the hydrophobic region.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2095-2100
• /
• 2009

Since most of the Extra High Voltage (EHV) transmission lines are untransposed and multi-circuits, errors are occurred inevitably because of the unbalanced impedances of the lines and so on. Therefore, a distance relaying algorithm applicable to the untransposed multi-circuits transmission lines needs to be developed. The proposed algorithm of fault location estimation in the paper uses the fundamental phasor to reduce the effects of the harmonics. This algorithm also analyzes the second-order difference of the phasor to calculate the traveling times of waves generated by faults. The traveling time of the waves generated by faults is derived from the second-order difference of the phasor. Finally, the distance from the relaying point to the faults is estimated using the traveling times. To analyze the performance of the algorithm, a power system with the EHV untransposed double-circuit transmission lines are modeled and simulated under various fault conditions such as several fault types, fault locations, fault inception angles and fault resistances. The results of the simulations show that the proposed algorithm has the capability to estimate the fault locations quickly and accurately.

• 공학교육연구
• /
• 제25권1호
• /
• pp.22-32
• /
• 2022

The purpose of this study is to design and operate non-face-to-face online practice class in engineering education, and to explore students' perceptions and effectiveness of them. To this end, after developing and implementing a strategy for non-face-to-face online practice activities in the 'Introduction to Electric Circuits and Lab' course, the questionnaire responses of 47 learners were analyzed, and the group differences were investigated using Kruskal-Wallis test. As a result, it was found that students' perceptions of non-face-to-face online practice class were positive in terms of learning effect, learning convenience, interaction, and satisfaction. The group difference according to the face-to-face/non-face-to-face preference method was found to be higher in the group that preferred non-face-to-face class in terms of learning convenience, interaction and satisfaction. As for the group difference according to the number of questions and answers of the learners, the group who answered the question showed a higher awareness of the learning convenience and interaction than the group that did not. In addition, implications for designing a learning environment for non-face-to-face online practice classes were presented.